RADWAG PUE 7.1 Weighing Terminal

Buy RADWAG products from MSE Supplies at the best value.

Sku #	WX-008-0025	WX-008-0026
Model #	PUE 7.1	PUE 7.1P
Protection class	IP 43	IP 66/67
Housing	stainless steel	-

Ergonomics and Comfort of Operation

It is equipped with 5.7" TFT display featuring a touch panel and a membrane keypad.

The device offers two proximity sensors which can be programmed using the menu. It can connect with maximum 2 weighing platforms, a barcode scanner, a printer, a labeller, RFID reader and PC equipment (mouse, keyboard, USB flash drive). Standard PUE 7.1 terminal communicates with 1 weighing platform, and is provided with an extended communication interface offering 2×USB, 2×RS 232, Ethernet, 4inputs/4outputs (digital), Wi-Fi®

It is possible to expand the PUE 7.1 terminal with 1 extra platform, this is done by installation of an additional platform module, DP-6.

Caution: in case of a terminal supporting 2 weighing platforms, only cable version is available (/R version does not exist).

Datasheet

Model	PUE 7.1	PUE 7.1P
Metrological parameters
OIML Class	III	-
Maximum quantity of verification units	6000 e	-
Minimum volatge per verification unit	0.4 µV	-
Maximum voltage per verification unit	3.25 µV	-
Minimum load cell impedance	50 Ω	-
Maximum load cell impedance	1200 Ω	-
Load cell excitation voltage	5V DC	-
Maximum increase of signa	19.5 mV	-
Physical parameters
Display	5.7” Resistiv-Farb-Touchscreen
Device dimensions	206×140×71 mm	215×156×120 mm
Packaging dimensions	300×250×130 mm	300×250×130 mm
Net weight	0.6 kg	0.8 kg
Gross weight	1.2 kg	2.75 kg
Construction
Protection class	IP 43	front IP 66/67, construction IP 32
Keypad	touch screen	touch screen
Housing	ABS plastic	Stainless steel
Components and software
Database capacity	16 GB (micro SD)	-
Operating system	Linux	-
Processor	quad-core 64-bit Cortex-A53 1.2 GHz	-
Memory	RAM 1GB LPDDR2	-
Data memory	16 GB (micro SD)	-
Communication interface
Communication interface	2×RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT (digital), Wi-Fi®
Additional DP6 A/C converter module	1 (option)	1 (option)
Metrological parameters
Minimum load cell impedance	-	50 Ω
Maximum load cell impedance	-	1200 Ω
Load cell excitation voltage	-	5V DC
Maximum increase of signal	-	19.5 mV
Electrical parameters
Power consumption max.	max. 1 A	-
Environmental conditions
Operating temperature	-10 — +40 °C
Relative humidity	10% — 85% RH no condensation
Number of buttons	8	8
Components and software
Operating system	-	Linux
Processor	-	quad-core 64-bit Cortex-A53 1.2 GHz
Memory	-	RAM 1GB LPDDR2
Data memory	-	16 GB (micro SD)
Features of use
Max number of platforms	2	2

*The power supply can be connected to the socket on the back of the balance housing or to the terminal.

MSE Supplies is an authorized distributor for RADWAG.

This product has been added to the cart.