Graphene and graphene oxide materials are carbon-based nanoparticles derived from a graphitic composition with a hexagonal honeycomb lattice, enabling high electrical conductivity, thermal conductance, and specific surface area. Variants such as graphene oxide and reduced graphene oxide introduce oxygen-functionalized surfaces and structural defects that influence dispersion, interfacial bonding, and electrochemical behavior.
This category includes:
- Graphene powders and graphene-based nanomaterials used in polymer composites and metal matrix composites requiring mechanical strength, thermal conductivity, and controlled particle sizes, bulk density, and tap density.
- Graphene oxide produced via chemical exfoliation, featuring oxygen-functionalized surfaces such as COOH (carboxylate) groups for water dispersion, coatings, and water purification systems.
- Reduced graphene oxide with improved electrical conductance and lower volume resistivity for electrically conductive coatings, graphene inks, and printable electronic circuits.
Selection of graphene and graphene oxide materials requires evaluation of:
- Electrical conductivity and electrical conductance, influenced by defect density and reduction level.
- Surface chemistry and functional groups, critical for dispersion and compatibility with ionic liquid systems and composites.
- Physical properties such as specific surface area, bulk density, tap density, and particle sizes affecting processing and performance.
- Thermal properties including thermal conductivity and resistance to thermal shock in heat sink applications.
- Morphology and appearance, along with graphitic composition, impacting barrier properties and coating performance.
Graphene and graphene oxide are widely used in:
- Energy storage systems such as lithium-ion batteries, graphene batteries, and super capacitors.
- Composite applications including polymer composites, graphene-reinforced systems, and carbon fiber materials.
- Specialty coatings and gas barrier layers for corrosion protection and surface engineering.
- Electronics including graphene inks, printable electronic circuits, graphene transistors, and sensor applications.
Through its portfolio of graphene and graphene oxide materials, MSE Supplies LLC supports research needs and industrial raw material sourcing, including bulk orders and larger quantities. For ordering information or material selection guidance, contact the MSE Supplies team.
Formulating Graphene into Working Materials
Graphene rarely performs as delivered. Sheets stack back together through van der Waals attraction the moment solvent leaves, so the surface area quoted on a datasheet is an upper bound that formulation either preserves or destroys. Most of the gap between published performance and bench results traces back to this step rather than to the material itself.
Mechanical Processing and Dispersion
Chemical exfoliation is not the only route to few-layer material. Dry and wet ball milling exfoliates graphite directly through shear, and the same equipment blends graphene into polymer pellets and metal powders where solvent-based mixing would leave agglomerates behind. Media choice governs the outcome, since milling jars and grinding media in zirconia, alumina, and tungsten carbide differ in density and wear rate, and any material shed from the media ends up in your product. Milling time cuts both ways: longer runs improve dispersion but raise defect density and shrink lateral flake size, which is a fair trade for composite reinforcement and a poor one for conductive networks.
Hybrid and Decorated Structures
Graphene is frequently used as a conductive scaffold rather than a standalone material. Anchoring metal oxide nanoparticles onto graphene oxide sheets combines the redox capacity of the oxide with a conductive backbone, and the oxygen groups on graphene oxide serve as nucleation sites that keep particles from aggregating. These hybrids are typically grown in situ from metal salts and precursors rather than physically mixed, so research grade inorganic chemicals with controlled trace metal content matter here, since impurities in the precursor concentrate at the interface where charge transfer happens.
Electrode and Transparent Film Integration
In battery electrodes, graphene functions as a percolating conductive additive at loadings well below what carbon black requires, because two-dimensional sheets bridge active particles across longer distances than spherical carbon. The tradeoff is rheological: high aspect ratio raises slurry viscosity and complicates coating uniformity, so additive loading is usually set by processability rather than by conductivity. Cells built this way pair graphene with cathode powders, separators, and electrolytes from our lithium battery materials range. In optoelectronics, graphene is positioned as a flexible alternative to indium tin oxide, though most device work still benchmarks against and builds on ITO coated glass, which remains the reference electrode for sheet resistance and transmittance comparisons and the standard base for solution-coated device stacks.
Formulation work tends to need materials, precursors, and processing equipment sourced together, since milling conditions and precursor purity determine what the finished material can do. Our applications team can help match grade and format to your process. The full range sits within our Materials Science products catalog covering advanced materials, laboratory equipment, and consumables.
What to know before you buy
Products here come in four forms: powders, water dispersions, films on substrates and finished devices. Powders include the 50 g graphene powder for electrical and thermal conduction, along with 50 g grades for polymer and fiber reinforcement and for anti-corrosion coating, and a 1 g high surface area grade for lithium-ion battery work. Graphene oxide comes as monolayer, reduced and amine functionalized powders.
For solution work, the monolayer graphene oxide water dispersion at 4 mg/ml is offered in 250 ml, 1 L, 5 L and 10 L, with a 20 mg/ml high concentration version in 500 mL. An aqueous conductive graphene slurry and graphene oxide quantum dots in solution are also listed.
Monolayer graphene films sit on Cu foil, SiO2/Si or quartz substrates. The film on Cu foil with PMMA coating already carries a support layer for transfer. For sensing work with ready-made devices, see the graphene field-effect transistors (GFETs). To understand how oxidation changes the material, read what is graphene oxide.
Frequently Asked Questions
Graphene, graphene oxide or reduced graphene oxide: which should I use?
Graphene powder suits conductive fillers and thermal paths. Graphene oxide carries oxygen groups, so it disperses in water and is easy to cast into films or functionalize. Reduced graphene oxide has had many of those groups removed, which brings back part of the conductivity. The 1 g reduced monolayer graphene oxide powder is a good starting point for that middle ground.
Should I buy graphene oxide as a powder or a dispersion?
A dispersion is ready for coating, casting or mixing and avoids re-dispersing dry flakes. The 4 mg/ml dispersion runs from 250 ml up to a 10 L size, and the 20 mg/ml version suits work that needs less water. Powder lets you choose your own solvent and concentration.
Which substrate should I choose for a monolayer graphene film?
Films on SiO2/Si, such as the 10 mm x 10 mm film on 300 nm SiO2/Si, pack of 4, suit electrical tests and optical inspection. Quartz substrates suit optical transmission work. Films on Cu foil, in 60 mm x 40 mm and 100 mm x 100 mm, are the as-grown form for transfer to your own substrate, and the PMMA coated version has the transfer support already applied.
Which graphene powder fits my application?
The 50 g powders are named by use: electrical and thermal conduction, polymer and fiber reinforcement, and anti-corrosion coating. For battery electrodes, the 1 g high specific surface area graphene powder is listed at about 800 m2/g. For water-based conductive coatings, the aqueous conductive graphene slurry, 1 kg is already in liquid form.
How do I order larger volumes or a custom specification?
Send the product, quantity and any custom needs, such as concentration, film size or substrate, through the quote request page. For repeat orders of listed items in larger amounts, use the bulk order request form.
