Portable Potentiostat / Galvanostat

MSE Supplies offers portable electrochemical workstation (potentiostat / galvanostat) in two variants, one with EIS and one without EIS. Both are powered by a lithium battery and can be placed in a glove box or used outdoors. The lithium battery can be charged in advance, and the Type-C interface is used for charging and communication. The electrochemical parameters of the grounding system can be measured without an isolation transformer. The portable electrochemical analyzer are mainly used for battery testing, electro analytical chemistry, and corrosion electrochemical testing.

Customers from Australia, South Korea, India, Turkey and Kazakhstan please contact Corrtest directly.

Applications:

(1) Reaction mechanism of electrosynthesis, electrodeposition (electroplating), anodic oxidation, etc

(2) Electrochemical analysis and sensor

(3) New energy materials (Li-ion battery, solar cell, fuel cell, super capacitors), advanced functional materials, photoelectronic materials

(4) Corrosion study of metals in water, concrete, soil, etc

(5) Fast evaluation of corrosion inhibitor, water stabilizer, coating and cathodic protection efficiency

Technical Specifications:

Dimension	150mm x 90mm x 30mm
Weight	~ 500g
Power Supply	Built-in lithium-battery 6000mAH at 3.7V / USB
EIS	Without EIS (SC100) With EIS (SC100E)
Potential Control Range	± 10V
Potential Control Accuracy	0.1% × full range
Maximum Current	± 45mA
Minimum Potential Resolution	10mV
Current Control Accuracy	0.1% × full range
Minimum Current Resolution	100fA
Reference Electrode Input Impedance	10¹³Ω \|\| 8pF
Potential Range	± 2.5V, ± 5V, ± 10V
Current Range	200pA ~ 50mA (10 ranges)
Compliance Voltage	± 12V
EIS Frequency Range	10μHz ~ 1MHz
Maximum Acquisition Rate	150,000 data points/s
AC Amplitude	0 ~ ± 2.5V
Signal Response Bandwidth	1MHz
CV and LSV Scan Rate	0.001mV ~ 10V/s
Warranty	2 years

Electrochemical Impedance Spectroscopy (EIS)

Signal Generator:

Frequency Range	10μHz~1MHz
Frequency Accuracy	0.005%
AC Signal Amplitude	1mV~2500mV
Signal Resolution	0.1mV RMS
DC Bias	-10V ~ +10V
Output Impedance	50Ω
Waveform	Sine wave, triangular wave and square wave
Wave Distortion	< 1%
Scan Mode	Logarithmic/linear, increase/decrease

Signal Analyzer:

Integral Time	Minimum	10ms or the longest time of a cycle
Integral Time	Maximum	10⁶ cycles or 10⁵s
Measurement Delay		0 ~ 10⁵s

DC Offset Compensation:

Potential Automatic Compensation Range	-10V ~ +10V
Current Compensation Range	-1A ~ +1A
Bandwidth	8-decade frequency range, automatic and manual setting

OS Requirement

Communications Interface: USB / Bluetooth

Operating System: Windows7/win8/win10/11

Software/ Techniques (only applicable to SC100E)

Techniques
Stable Polarization	Open Circuit Potential (OCP)
	Potentiostatic (I-T Curve)
	Galvanostatic
	Potentiodynamic (Tafel Plot)
	Galvanodynamic
Transient Polarization	Multi-Potential Steps
	Multi-Current Steps
	Potential Stair-Step (VSTEP)
	Galvanic Stair-Step (ISTEP)
Chrono Methods	Chronopotentiometry (CP)
	Chronoamperometry (CA)
	Chronocoulometry (CC)
Voltammetry	Cyclic Voltammetry (CV)
	Linear Sweep Voltammetry (LSV)
	Staircase Voltammetry (SCV)
	Square Wave Voltammetry (SWV)
	Differential Pulse Voltammetry (DPV)
	Normal Pulse Voltammetry (NPV)
	Differential Normal Pulse Voltammetry (DNPV)
	AC Voltammetry (ACV)
	2nd Harmonic A.C.Voltammetry (SHACV)
	Fourier Transform AC Voltammetry (FTACV)
Amperometric	Differential Pulse Amperometry (DPA)
	Double Differential Pulse Amperometry (DDPA)
	Triple Pulse Amperometry (TPA)
	Integrated Pulse Amperometric Detection (IPAD)
Stripping Voltammetry	Potentiometric Stripping
	Linear Stripping
	Staircase Stripping
	Square Wave Stripping
	Differential Pulse Voltammetry Stripping
	Normal Pulse Voltammetry Stripping
	Differential Normal Pulse Voltammetry Stripping
EIS	EIS vs Frequency (IMP)
	EIS vs Time (IMPT)
	EIS vs Potential (IMPE) (Mott-Schottky)
Corrosion Test	Electrochemical Potentiokinetic Reactivation (EPR)
	Electrochemical Noise (EN)
	Zero Resistance Ammeter (ZRA)
Battery Test	Battery Charge and Discharge
	Galvanostatic Charge and Discharge (GCD)
	Potentiostatic Charging and Discharging (PCD)
	Potentiostatic Intermittent Titration Technique (PITT)
	Galvanostatic Intermittent Titration Technique (GITT)
Extensions	Data Logger
	Electrochemical Stripping/Deposition
	Bulk Electrolysis with Coulometry (BE)
	Rs Measurement

This product has been added to the cart.