MSE PRO Laboratory Handheld Standard Conductivity Meter
SKU: MA0850
MSE PRO™ Laboratory Handheld Standard Conductivity Meter
General Features:
- LCD display screen, 3.5 inches.
- Multi-reading feature allows auto-read and continuous-read.
- Automatic/Manual temperature compensation ensures accurate results.
- Auto-hold feature senses and locks the measurement endpoint.
- Data capacity of up to 200 sets for each parameter.
- Auto-power off feature effectively extends the battery service life.
- Reset feature automatically resumes all settings back to factory default options.
- IP65 waterproof. The portable meter is suitable for fields measurements and out door measurements.
- 1 point calibration with Standard Recognition.
- Cell constant is settable
- Automatic/manual temperature compensation ensures accurate results.
Specifications:
| Model | MA0850 | |
| Parameters | EC/Temp.(TDS) | |
| Conductivity | Range | 0.00 μS/cm to 200 mS/cm |
| Resolution | 0.01 μS/cm minimum, | |
| various with range selection | ||
| Accuracy | ±1.0% FS | |
| Reference Temperature | 25 ºC | |
| Calibration Points | Up to 1 | |
| Standard Recognition | 84μS/cm, 1413μS/cm, 12.88mS/cm | |
| TDS | Range | 0.00 ppm~300 ppt |
| Resolution | 0.01 ppm minimum, various with range selection | |
| Accuracy | ±1.0%FS | |
| Temperature | Range | -5 to 110 ºC |
| Unit | ºC | |
| Resolution | 0.1ºC | |
| Accuracy | ±0.2ºC | |
| Measurement | Reading Mode | Auto Read, Continuous |
| Reading Prompts | Reading, Stable, Locked | |
| Temp. Compensation | ATC, MTC | |
| Data management | Data Storage | 200 results each |
| Inputs | Conductivity with Temp. Probe | 5-pin aviation connector |
| Display options | Backlight | Yes |
| Auto Shutdown | 300, 600, 1200, 1800, 3600 sec., off | |
| IP Rating | IP65 | |
| General | Power Supplies | 110VAC, 60Hz |
| Dimensions | 80×255×35 mm | |
| Weight | 400g (0.88 lb) | |
MSE Supplies offers a variety of electrochemical meters & analyzers, including both benchtop and handheld models, to suit different applications and requirements. Please contact us to discuss your needs.