Menu
Cart
Aluminum Laminated Film For Pouch Cell Case (400 mm wide, 12.5 m long, 113um thick),  MSE Supplies LLC

Aluminum Laminated Film For Pouch Cell Case (400 mm wide, 12.5 m long, 113um thick)

  • $ 29500


Product Details:

Pouch cell is a type of battery design which is simple, flexible and lightweight. Compared with other battery design, pouch cell has the best packing efficiency, 90~95%. Moisture is one of key factor which shorten cell life. This aluminum laminated film (113 um ) is widely used as pouch cell casing material due to its low moisture transmission rate.

SKU #

BR0119

Pack 5 square meter/roll

Layers from outside (Shiny) to inside (Mat)

 

Polyamide (JIS Z1714): 0.025mm (+-0.0025mm) 
Adhesive (Polyester-polyurethane):  4-5 g/m2 
Aluminum foil (JIS A8079,A8021): 0.040mm (+-0.004mm) 
Adhesive (Urethane-free Adhesive): 2-3 g/m2
Polypropylene: 0.040mm (+-0.004mm) 

Thickness:             

113μm 

Width 

400mm 

Length 

12.5m

Molding Depth

≥5.0mm

Electrical Insulating

Good

Hot Sealing Coniditon

180-190°C

Moisture Vapor / O2 Transmission Rate

200ppm / 5 years 

Laminate Strength 

Nylon/Al   more than 2N/15mm Al/CPP   more than 5N/15mm 

Heat Seal Strength 

More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec heat sealing 

Solvent Retention

Less than 5mg/m2 

Appearance 

Within the sample of the limit 

Slip Factor 

CPP/CPP   less than 1.0