MSE PRO™ Laboratory Benchtop High Performance Multiparameter Analyzer Kit

General Features:

Color High contrast LCD touchscreen, 7.0 inches.
Intelligent operation system provides features including user management, calibration management, method management, data management and etc.
Multi-reading feature allows auto-read, timed-read and continuous-read.
Automatic/Manual temperature compensation ensures accurate results.
Data Storage 1000 sets for each parameter (GLP-compliant).
Data analysis feature helps user review, compare and recalculate results.
Support for USB or RS-232 communication.
Reset feature automatically resumes all settings back to factory default options.
IP54 waterproof.
Support for three modules, namely pH/ISE module, conductivity module and dissolved oxygen module.
Select from three modules to customize the four channels your way.
Four channels can be configured in any combination.

pH Testing Features:

1-6 points calibration with Standard Recognition.
Selectable pH buffer groups, including NIST, DIN, GB.
Support for pH standard group customization.
Automatic electrode diagnosis with pH slope and offset display.

Ion Testing Features:

1-6 points calibration
Selectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.
Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.
Over 10 methods are built-in, including F^-, Cl^-, Br^-, I^-, NO3^-, BF4^-, NH4+, K+, Na+, Ca_²⁺, Cu_²⁺, Pb_²⁺, Ag+ and etc., user-defined method is supported.

Conductivity Testing Features:

1-5 points calibration with Standard Recognition.
Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.
Temperature compensation type (none, linear, pure water).

Dissolve Oxygen Testing Feature

Support for air-saturated water or zero oxygen calibration.
Auto barometric pressure compensation.
Manual Salinity Factor Correction.
Selectable pressure unit, including kPa, mbar, Torr, Atm.

Package

pH composite electrode
Conductivity electrode
Temperature probe
DO electrode
NIST pH standard solution(4.01, 7.00, 10.01), 50ml/vial
1413μS/cm EC standard solution, 50ml, 1 vial
Electrode stand
Touch pen

Specifications:

Model		MA0884
pH	Range	-2.000 to 20.000 pH
	Resolution	0.1, 0.01, 0.001pH
	Accuracy	±0.002 pH
	Calibration Points	Up to 6
	Standard Customization	Yes
	Calibration Reminder	Yes
	Standard Recognition	NIST, GB, DIN buffers
	Slope Limit	Yes
mV/ORP	Range	-2000.00 to 2000.00 mV
	Resolution	0.1, 0.01 mV
	Accuracy	±0.1 mV or ±0.03%
	EH ORP Mode	Yes
	ORP Calibration Points	1~2 custom point (relative mV)
pX	Range	-2.000 to 20.000 pX
	Resolution	0.1, 0.01, 0.001 pX
	Accuracy	±0.002 pX
	Calibration Points	Up to 6
ISE	Range	1.000e-9 to 9.999e+9
	Units	mol/L, mmol/L, g/L, mg/L, μg/L
	Resolution	Up to 4 significant digits
	Accuracy	±0.3%
	Calibration Points	Up to 6
Conductivity	Range	0.000 μS/cm to 3000 mS/cm
	Resolution	0.001 μS/cm minimum, various with range selection
	Accuracy	±0.5% FS
	Reference Temperature	5, 10, 15, 18, 20, 25 ºC
	Calibration Points	Up to 5
	Standard Recognition	146.5μS/cm, 1408μS/cm, 12.85mS/cm, 111.3mS/cm
Resistivity	Range	5.00 Ω·cm~100.0 MΩ·cm
	Resolution	0.01 Ω·cm minimum
	Accuracy	±0.5% FS
TDS	Range	0.000 mg/L~1000 g/L
	Resolution	0.001ppm minimum, changed with range
	Accuracy	±0.5% FS
Salinity	Type	NaCl%
	Range	(0.00~8.00)%
	Resolution	0.01%
	Accuracy	±0.1%
Dissolved	Range	0.00 to 99.99 mg/L
Oxygen Concentration - Polarographic	Resolution	0.01 mg/L
	Accuracy	±0.1 mg/L
	Calibration Reminder	Yes
	Calibration Points	Air-saturated water or zero point
	Barometric Compensation	Yes
	Manual Salinity Factor Correction	Yes
% Saturation -Polarographic	Range	(0.0 to 600)%
	Resolution	0.10%
	Accuracy	±2.0%
Temperature	Range	-5 to 130 ºC
	Unit	ºC
	Resolution	0.1ºC
	Accuracy	±0.1ºC
Measurement	Reading Mode	Auto Read (Fast, Medium, Slow), Timed, Continuous
	Reading Prompts	Reading, Stable, Locked
	Temp. Compensation	ATC, MTC
Data management	Data Storage	1000 Groups
	GLP Features	Yes
	Log Management	Yes
Inputs	pH Electrode	BNC(Q9)
	DO with Temp. Probe	6-pin Mini-DIN
	Conductivity with Temp. Probe	8-pin Mini-DIN
Outputs	USB, RS 232	USB 2.0 flash memory device, printer, PC
Display options	Backlight	Yes
	Auto Shutdown	1~60 min, off
	IP Rating	IP54
	Date and Time	Yes
General	Power	110V AC, 60Hz
	Dimensions	280×280×130 mm
	Weight	2500g (5.51 lb)
	Dimensions (Carton)	370×305×330 mm
	Weight (Gross)	4 kg

Optional Accessories

pH/ISE Module

pH Range: -2.000 ~ 20.000 pH , Accuracy±0.002 pH
pX Range: -2.000 ~ 20.000 pX , Accuracy±0.002 pX
ISE Range: 1.000e-9～9.999e+9 , Accuracy ±0.3%
mV Range: -2000.00 ~ 2000.00 mV , Accuracy ±0.03%FS
Temp. Range: -5 ~ 130 ºC , Accuracy ±0.1
Include pH composite electrode, Fluoride ion selective electrode, NIST pH standard solution(4.01, 7.00, 10.01) , 50ml/vial

Conductivity Module

EC Range: 0.000 μS/cm ~ 3000 mS/cm , Accuracy ±0.5%FS
Resistivity Range: 5.00 Ω·cm～100.0 MΩ·cm , Accuracy ±0.5%FS
TDS Range: 0.000 mg/L～1000 g/L , Accuracy ±0.5%FS
Salinity Range: (0.00～8.00)% , Accuracy ±0.1%
Temp. Range: -5 ~ 130 ºC , Accuracy ±0.1
Include conductivity electrode, Temperature probe, 1413μS/cm EC standard solution, 50ml, 1 vial

DO Module

Polarographic
DO Range: 0.00 ~ 99.99 mg/L , Accuracy ±0.1 mg/L
DO Saturation Range: (0.0 ~ 600.0)% , Accuracy ±2.0%
Temp. Range: -5 ~ 130 ºC , Accuracy ±0.1
Include Temperature probe, DO electrode

X Module

Protection Module

MSE Supplies offers different types of pH meters and ion meters including benchtop, handheld and pen style to meet different occasions and needs. Please contact us to discuss your needs.

This product has been added to the cart.