Menu
Cart
MSE PRO Automatic Contact Angle Meter/Goniometer/ Pendant Drop Tensiometry - MSE Supplies LLC

MSE PRO Automatic Contact Angle Meter/Goniometer/ Pendant Drop Tensiometry

  • $ 28,72995

MSE PRO™ Automatic Contact Angle Meter/Goniometer/ Pendant Drop Tensiometry

MSE Supplies offers a Automatic contact angle meter. This is one of our most accurate and advanced model. It is equipped with automatic aspiration and injection system with accuracy of 0.01μL, which is perfect for small area measurement. It can be used to measure the hydrophobicity, wettability, surface tension, interfacial tension and many other test functions.

This automatic contact angle measurement instrument features automatic sample introduction, automatic liquid dispensing, measurement automation through software, and automatic switching to the next measurement point. The automatic sample batch measurement setup function supports the configuration of testing protocols for specified samples. It is widely used for materials science, surface chemistry, engineering, and many other fields.

Brand: MSE PRO™

Manufacturer: MSE Supplies LLC

Specification:

SKU MA2115
Dimension (WxDxH) 760mm x 380mm x 700mm
Weight 21kg
Power Supply 100~240VAC, 50/60Hz
Power 150W
Platform Area 130mm × 170mm
Platform Control
  • Automatic front and rear adjustment, stroke 180mm, accuracy 0.1mm
  • Automatic left and right adjustment, stroke 120mm, accuracy 0.1mm
  • Manual up and down adjustment, stroke 20mm, accuracy 0.1mm
Moving Accuracy ±0.1mm on each side
Measurement Range 0°～180°
Measurement Accuracy ±0.01°
Sample Introduction Mode Injection pump
Syringe Volume 100μL/500μL/1000μL (500μL standard)
Needle Diameter 0.51mm
Flow Rate 1μL/min~2000μL/min 
Syringe Accuracy
 0.01μL
Camera System USB 3.0 CMOS camera: 200fps 
Camera Resolution 5000(H) x 4000(V)
Surface Tension Testing Range 0-3000mN/m
Surface Tension Testing Resolution 0.01mN/m

*Please contact us for detail specification and accessories guidance.

Measurement Method : 

a. Sessile drop

b. Liquid increase

c. Shrinkage 

d. Tilt angle

e. Hanging drop

f. Fiber wrap

g. Bubble capture

h. Batch fitting

I. Plug in

Measurement Function:

a. Surface energy analysis

b. Static contact angle measurement

c. Forward/backward angle

d. Dynamic video measurement

e. Captive bubble

f. Top view measurement

g. Surface interfacial tension

Fitting Method:

a. Differential circle method

b. Differential ellipse method

c. Dot/Three dot method

d. Ellipse method

e. Width and height method

f. Concave surface method

g. Convex surface method

h. Young-Laplace method

I. Five point method