MSE PRO™ Lithium-Aluminum (Li-Al) Alloy Chip with D16 mm x T0.6 mm as Anode of Li-ion Battery, 10g / bottle

MSE PRO™ Lithium-Aluminum (Li-Al) Alloy Chip is prepared to meet the needs of more high-end technology, especially lithium-ion batteries. This product has high energy density, lower volume expansion and better cycling performance. These advantages make it widely used in lithium battery research and other fields. Can with lithium chips must be opened inside a glove box with Argon Gas and moisture less than 2%RH.

Shipping and handling: This material is classified as a hazmat and requires special packaging and shipping to comply with regulatory requirements. Please contact us for specific details with shipping and handling.

High Energy Density: Li-Al alloy can offer higher energy density compared to traditional electrode materials, which allows for longer battery life in applications.
Lower Volume Expansion: Compared to pure lithium electrodes, Li-Al alloy exhibits lower volume expansion during charge and discharge cycles, improving battery stability and lifespan.
Better Cycling Performance: Li-Al alloy can maintain high capacity over multiple charge and discharge cycles, making it advantageous for use in rechargeable batteries.
Enhanced Safety: The addition of Al improves the chemical stability of the Li-Al alloy, reducing the risk of battery short circuits or thermal runaway, thereby enhancing battery safety.
Cost-Effectiveness: Al is a relatively inexpensive and abundant material compared to other high-performance electrode materials, which helps to lower production costs.

MSE Supplies offers a range of Lithium Alloy Chips. Please contact us for more information.

Specifications:

SKU#	BR0623
Composition	Al : ~0.5%
Melting Point	~700-750 °C
Color	Silver
Dimension	16 mm x 0.6 mm (diameter x thickness)
Net Weight	10 g/bottle (~150pcs)

Note:

Due to the nature of the material, please inspect the product upon arrival. MSE Supplies will be only responsible for the manufacturing defects only within 1 week after delivery. It is normal to see black spots on the chips. You can use a nylon brush/stainless steel scalpel to clean the surface.

The product was manufactured in dry room. It may contain some residual oxygen which can cause the temporary oxygen level increase when opened in glove box.

This product has been added to the cart.

Metal Foils and Chips