PrimeLab 2.0 Photometer Starter-Kit with Turbidity (NTU) without Reagents

The PrimeLab 2.0 launched by Water-i.d. Highly accurate readings on 18 parallel wavelengths, Bluetooth-USB-WiFi-4G* connections, powerful software and app, synchronized over a cloud-service, large HD touch display and the option to connect test probes are just some features of the new PrimeLab 2.0.

Buy Water i.d. products from MSE Supplies at the best value. MSE Supplies is an authorized distributor for Water-i.d. GmbH.

Features:

Whilst normal photometers perform tests on one selected wavelength only, the PrimeLab 2.0 receives data from 18 different wavelengths in parallel with each measurement, covering the key parts of UV and IR section of the spectrum and the full VIS range.
3 sensors with 6 wavelengths each are connected to each other Correspondent LEDs are set up at 180° as well as at 90° to enable NTU-Turbidity, PTSA and Fluorescein measurements as well.
Very narrow peaks between 390 and 950 nm allow utmost accurate readings, similar to the performance of a spectrophotometer.
The highly professional PrimeLab 2.0 firmware interpolates between the different wavelength-readings whilst parameter curves are set up to use multiple wavelengths to obtain the most accurate test results.

Technical Data:

Dimensions	10cm x 25.5cm x 5.9cm (width x length x depth)
Weight	715g
Spectral range	390nm - 950nm 18 wavelength, peaks at 410/435/460/485/510/535/560/ 585/610/645/680/705/730/760/810/860/900/940nm 180° and 90° Setup for direct and indirect measurement
Parameters	more than 140 parameters (flexible setup) User defined parameter function
Electrodes	USB-type-C connector for pH/EC/TDS/ORP/Temp-Probes
Connectivity (technical)	Bluetooth 4.2 WiFi USB (type C) 4G* (via USB-modem)
Connectivity (software)	LabCOM Software (Windows / Mac) LabCOM App (Android / iOS) LabCOM Cloud (web-browser)
Display	5.5" Color-HD touch display
Camera	In-build barcode / QR-code scanner
Calibration	Auto-calibration function with certificate (software)
One-Time-Zero	Inteligent OTZ (One-Time-Zero) function with recognition of ZERO types
Internal memory	>5,000
Clock/Date	RTC (Real-Time-Clock) with calendar function
Auto-Off	Factory default setting = 10 minutes. Individual adjustment possible
Menu guidance	Intuitive, display-controlled 4-button menu guidance; test instructions during measurement process
Power supply	8,500 mA Li-lo-battery
Languages	>15
Environment	5°C - 45°C / 30 - 90% rel. humidity
Water-proof rating	The device is splash-water-proof (IP54)
Reagents	The calibration curves for the individual parameters / measurement procedures are adjusted to the reagents offered by Water-i.d. Using reagents from other manufacturers may lead to wrong readings / higher tolerances. PrimeLab reagents are entirely "Made in Germany" or "Made in UK"!

Kits List:

PrimeLab 2.0 Starter-Kit with Turbidity (NTU) (without reagents)

1 x grey plastic carrying-case with foam insert
1 x PrimeLab 2.0 Multitest Photometer
4 x 24mm/10ml glass-vials with lid (light-shield incorporated into the lid)
1 x light shield (for 16mm and 1ml vials as well as check-standards)
1 x 24mm vial adapter (built-in; exchangeable)
1 x 10.5 cm stirring rod 1 x 10ml plastic syringe (graduated)
1 x 1 - 10ml professional lab pipette with 2 tips
1 x NTU-Turbidity calibration kit. Sealed glass vials with 0.5 / 10 / 1000 NTU
1 x vial cleaning brush
1 x microfibre cleaning cloth for vials
1 x Bluetooth USB dongle
1 x charger with cable (USB-Type-C)
1 x printed user manual in a ring-binder

This product has been added to the cart.

Liquid Handling