MSE Supplies offers various function-specific models applicable to various measurements for Battery basic research etc.

This item can provide the half-cell measurement by 3-electrode-method using the reference electrode and can provide the each characteristics evaluation test on positive and negative material (on independent four terminal and realizing the high input impedance).

Independent 8-channel charge and discharge control.
Software and connectors included.
Minimum data sampling time interval is 10 ms.
Equipped with transient recorder function that collects the transient data at 10 ms.
(at a moment of switching to discharge mode from charge mode during long-hour measurement.)
Equipped with CC-CV operation which has digital control for minimum overshoot.
The digital filter reduces noise.
Function at the setting of more than 500ms data saving time interval.
Equipped with Constant Power Control mode and Constant Resistance Control mode.
Capability to program maximum 20steps and 50patterns.
Equipped with jump function which repeats the continuous few patterns.
Equipped with High speed multi-step function:
1step-20stages(max) and 1stage can set at 10ms(minimum)
Capability to control the maximum 16 units (128 channels) by using the server PC and client PC.

Made in Japan.

Specifications:

Control	Voltage	-2 to 10 V
	Current	±1 A
	Step time	0.1 sec. to 100 days resolution 0.1 sec.
Range	Voltage	10V
	Current	1A, 100mA, 10mA, 1mA, 100uA, Auto
	Control method	CC, CC/CV, CP, CP/CV, CR
Communication		Connect to PC by Ethernet
Control accuracy	Voltage	±0.05% of control ±1mV
	Current	±0.05% of control ±0.05% F.S. (over 10% of F.S.)
	Voltage	±0.05% of reading ±1mV
	Current	±0.05% of reading ±0.05% F.S.
Protective circuit		overvoltage / overcurrent / voltage line disconnection detection
Power supply		110V/60Hz
Power consumption		350VA
Dimensions		W434×D225×H500mm
Weight		19kg