Kemet Polishing Pads, Pk of 10

Buy Kemet Products from MSE Supplies at the best value.

MSE Supplies offers metallographic consumables from Kemet

Polishing pads enable flat polished surfaces to be produced on many softer materials. Kemet offer a wide range of self-adhesive and metallic backed polishing pads.

PSU-M

A firm, dense and uniform, non-woven polishing cloth for use as an intermediary pad, after grinding and before final polishing. The perfect pad for finishing plastics with non-diamond abrasives. Use with AcryPol for final polishing of Acrylic lenses.

PAD-K

The ultra-hard chemo-textile pad used where fast cutting is needed.

ASFL

Woven synthetic silk polishing cloth with internal barrier for mirror polishing of metals and plastics. Use with 3 μm (and finer) Kemet Diamond Suspensions. Thin polishing surface means minimal edge roll-off. Suitable for the preparation of metallurgical specimens. Achieves excellent flatness and surface finish.

MSFL

Will polish metal flat, and to a mirror finish. Best results are obtained when used with Kemet Diamond Compound or Diamond Suspension 3 micron and finer. Water resistant adhesive (oil resistant available).

MRE

Synthetic flock on a flexible waterproof carrier. A heavy duty flock cloth for use with 6 μm Aquapol Diamond Suspension and finer. Also the perfect cloth for CMP superfinishing on soft materials with Kemet Col-K NC.

NSH-B

A short nap cloth with woven backing ideal for final polishing with 3 μm (and finer) Aquapol Diamond Suspension.

NLH

Very soft, flocked polishing cloth made of absorbent viscose fibres on a woven cotton substrate. Perfect final polishing cloth for harder alloys using Aquapol-P Diamond Suspension or Kemet CP polycrystalline Diamond Compounds.

Chem H

Buffed polyurethane with microscopic voids, laminated to a non-woven substrate. A more closed pore structure which gives a longer life time and higher stock removal. The very fine fibres are mainly horizontally oriented and they make the pad more dense. Ideal polishing pad for use with colloidal silica chemical mechanical polishing.

LIL-Plus

Soft, flocked polishing cloth made of absorbent viscose fibres on a polymer backing. Use with 3 μm (and finer) Aquapol Diamond Suspension.

Selvyt SR

A cotton pad of medium nap with a single pile. Available only as non-adhesive.

Kan

Woven polishing cloth made from 100% pure wool for final polishing using Kemet Diamond or conventional abrasives.

Kemet Chemo-textile Pads

These are manufactured to the highest standards with accurately controlled uniform thickness. Self-adhesive, and available in medium (PSU-M) and hard (PAD-K) formats. Chem Cloth is also available for Chemo-mechanical Polishing.

Diameter (mm)				Pack of 10
150	200	250	300	Type
341007	341008	341009	341010	PSU-M
341020	341017	341028	341039	PAD-K

Kemet Nap-Type Pads

For final polishing stages of preparation, Kemet Nap Type Pads are available with a range of softness and nap length. They give a more gentle polish, and are ideal for softer specimens and components. All pads are self-adhesive unless marked ‘plain'.

Diameter (mm)					Pack of 10
150	200	250	300	380	Type
341779	341782	341783	341784	_	Chem H
41241	341205	341247	341206	341248	NLH
341721	341722	341726	341724		MBL
341711	341712	341716	341714	_	MRE
341256	341257	341246	341203		NSB-H
341613	341611	341610	341609	_	LIL-PLUS

Kemet Silk-Type Pads

Kemet silk-type pads have been developed for finishing metal specimens and components.

Diameter (mm)				Pack of 10
150	200	250	300	Type
341147	341148	341162	341111	ASFL
_	341120	_	341103	ASR
341751	341752	341754	341755	MSL
341701	341702	341707	341704	MSR
341761	341762	341764	341763	MST

MSE Supplies provides a wide range of metallographic consumables. Please contact us for more details.

This product has been added to the cart.