Menu
Cart
10g Mesoporous Carbon for Lithium-Sulfur Battery - MSE Supplies LLC

10g Mesoporous Nano Carbon for Lithium-Sulfur Battery

  • $ 28500


10g Mesoporous Nano Carbon for Lithium-Sulfur Battery

Rechargeable lithium–sulfur (Li–S) batteries have recently become one of the most promising energy storage systems due to the low-cost and high-specific energy of sulfur cathodes. The practical application is still hindered by many material challenges, including dissolution of intermediate lithium polysulfides (Li2Sxx>3) in the electrolyte, large volumetric expansion (80%) of sulfur upon lithiation, and poor electronic/ionic conductivity of sulfur and lithium sulfide (Li2S). 

Mesoporous carbon has large specific surface area and pore capacity, good electrical conductivity and structural stability, controlled pore size distribution and ordered pore structure, which can effectively improve the utilization of sulfur and the cycling performance of batteries. The composites of ordered mesoporous carbon and sulfur can obtain better electrochemical performance. The small load of mesoporous cabron can help to inhibit the diffusion of polysulfide ions and facilitate the transport of lithium ions during the charge and discharge. In addition, the large pore capacity can increase the sulfur loading and improve the initial discharge capacity and cycling performance of the battery.

Product SKU#: PO5019

Package Size: 10 g

Specifications:

  • Appearance: Black powder
  • Composition: Mesoporous carbon
  • Particle Sizes:
    • D10: 3.7 µm
    • D50: 10.4 µm
    • D90: 27.9 µm
  • TAP Density:  0.146 g/cm3
  • Specific surface area: 232 m2/g (mercury intrusion porosimetry test)
  • Theoretical sulfur loading: up to 90 wt%
  • Other information is limited

References:

1. Balancing surface adsorption and diffusion of lithium-polysulfides on nonconductive oxides for lithium–sulfur battery design, Nat. Commun. 7, 11203 (2016)

2. New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes, Acc. Chem. Res. 2013, 46, 5, 1135–1143


    We Also Recommend
    100g Conductive Graphite (TIMCAL KS-6) Powder for Battery Research,  MSE Supplies

    100g Conductive Synthetic Graphite (TIMCAL TIMREX® KS6) Powder for Battery Research

    $ 8950
    10g Battery Grade 99% High Purity Multi Walled Carbon Nanotubes and 99.9% Carbon Nanofibers (10-15nm, 30-80nm, 100-200nm),  MSE Supplies

    10g Battery Grade 99% High Purity Multi Walled Carbon Nanotubes and 99.9% Carbon Nanofibers (10-15nm, 30-80nm, 100-200nm)

    $ 11500
    10g High Purity (>99.9 wt%) Graphitized Multi-Walled Carbon Nanotubes (MWCNTs) with Open Tube Ends - MSE Supplies LLC

    10g High Purity (>99.9 wt%) Graphitized Multi-Walled Carbon Nanotubes (MWCNTs) with Open Tube Ends

    $ 14900
    10g Sodium Vanadium Phosphate [Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub>] Cathode Material For Sodium Ion Batteries - MSE Supplies LLC

    10g Sodium Vanadium Phosphate [Na3V2(PO4)3] Cathode Material For Sodium Ion Batteries

    $ 33500 Save $ 3400
    Sulfur-Carbon Composite Cathode Material For High Performance Lithium-Sulfur Batteries, 10g/bag - MSE Supplies LLC

    10g Sulfur-Carbon Composite Cathode Material For High Performance Lithium-Sulfur Batteries

    $ 28500