ELVEFLOW Kit Fittings Starter Pack Luer

Buy ELVEFLOW products from MSE Supplies at the best value.

Product Description

Toolbox kit contains the fittings to go from the pressure source to the controller, the controller to the reservoirs and the reservoirs to the chips.

/! Reservoirs not included /!

Includes:

BLUE PFA Nuts Flangeless 1/4"-28 Fitting for 1/16" Tubing with ETFE Ferrules Flangeless 1/16" (x10)
1/4"-28 Thread to 3/32" OD Barb (x10)
PTFE Tape for Sealing (1 max per parcel)
Pneumatic Cross Tube-to-Tube Adapter for 6mm OD Tubing (x1)
Pneumatic Tee Tube-to-Tube Adapter for 6mm OD Tubing (x1)
Coil Tubing 6mm OD (2m)
steel wing hose clip,11-16mm diameter (x1)
steel wing hose clip,14-22mm diameter (x1)
Tailpiece adaptor,1/4 in BSPTM x7mm hose ID (x1)
Tailpiece adaptor,1/4 in BSPTM x10mm hose ID (x1)
Male parallel straight adaptor G1/4 x 6mm (x1)
Male parallel straight adaptor G1/4 x 8mm (x1)
Male parallel straight adaptor G1/4 x 10mm (x1)
Brass female sleeve,1/4in BSPP Female-Female (x1)
Toggle Lever Pneumatic Manual Control Valve, G 1/4, Brass, Nylon (x1)
Male Luer Integral Lock Ring Plug (x10) Male Luer Integral Lock to 3/32" OD Barb (x10)- 4mm OD PU Tubing (5m)
PTFE Teflon Tubing Spare Roll 1/16" OD x 1/32 ID (50meters = 164 feet).
Set of flow resistances : 1/16 OD PEEK Tubing , 50 µm ID (x 20 cm) , 65 µm ID (x 20 cm) , 100 µm ID (x 20 cm), 175 µm ID (x 20 cm) , 250 µm ID (x 20 cm) - 1/4-28 to 1/4-28 internal threads Standard Union (x 2) - Microfluidic Tubing Cutter (x 1) - 5µm Luer lock Filter

Toolbox kit containing all the fittings’ environment to get started out of the box with the OB1 MK3+ controller.

Specifications

Contains everything to hook-up a pressure source to the OB1 controller, the controller to the reservoirs (not included) and the reservoirs to the chips:

Set of fitting adaptors to connect your pressure source to the 6mm pipe input of the OB1
Male Luer Integral Lock Ring Plug (x10) Male Luer Integral Lock to 3/32″ OD Barb (x10)- 4mm OD PU Tubing (5m) to connect pressure/vacuum Luer output of the OB1 to the tubes
PUR polyether clear 4mm OD tube (5m) to go from the OB1 to the reservoir
1/4″-28 Thread to 3/32″ OD Barb (x10): fittings to connect the tube from the OB1 to the reservoir
BLUE PFA Nuts Flangeless 1/4″-28 Fitting for 1/16″ Tubing with ETFE Ferrules Flangeless 1/16″ (x10): fittings to connect the output from the reservoirs or the inputs of the sensor to the 1/16” OD tubes
PTFE Tape for Sealing (1 max per parcel): helps to ensure a perfectly sealed connection
PTFE Teflon Tubing Spare Roll 1/16″ OD x 1/32 ID (50m): going from the reservoir to your application
Set of flow resistances :
- 1/16 OD PEEK Tubing , 50 µm ID (x 20 cm) , 65 µm ID (x 20 cm) , 100 µm ID (x 20 cm) , 250 µm ID (x 20 cm) : set of flow resistance to help you finely tune your setup
- 1/4-28 to 1/4-28 internal threads Standard Union (x 2): to connect different pieces of tubes or flow resistances together
- Microfluidic Tubing Cutter (x 1): to ensure a clean cut of the resistance
Filter 5µm Luer Lock (hydrophilic, max pressure 6 bar) to filter your solution if needed

MSE Supplies offers ELVEFLOW microfluidic accessories. Please contact us for more information.

This product has been added to the cart.

Kit Fittings Starter Pack Luer