MSE PRO 1M LiTFSI in DME/DOL 1:1 (v/v) with 1wt% LiNO3 Electrolyte for Li-S Battery, 1 kg
MSE PRO™ 1M LiTFSI in DME/DOL 1:1(v/v) with 1wt%
LiNO3 Electrolyte for Li-S Battery, 1 kg
The lithium–sulfur (Li–S) battery is a type of rechargeable battery with high specific energy on the order of 550 Wh/kg. The low atomic weight of lithium and moderate atomic weight of sulfur means that Li–S battery weight is relatively light. Li-S batteries also have reduced cost compared with Li-ion batteries (LIBs) due to the use of sulfur instead of cobalt.
The electrolyte plays a key role in Li–S batteries. Common organic carbonates such as EC and DEC used in LIBs are not compatible with Li-S battery chemistry system. Cyclic ethers (e.g. dioxolane, DOL) or short-chain ethers (e.g. dimethoxyethane, DME) are widely utilized in Li-S batteries.
1M LiTFSI (Lithium bis(trifluoromethanesulfonyl)imide) in DME/DOL 1:1(v/v) with 1wt% LiNO3 electrolyte is one of the most widely used electrolyte in Li-S batteries. LiNO3 is taken as additive for lithium surface passivation. MSE Supplies offers such solution suitable for Li-S battery coin cell R&D. We can also customize solvent volume ratio, additive type and ratio and the electrolyte salt type. Please contact us to discuss your need and get a quote on custom-made electrolytes.
Hazmat shipment fee ($175.00) applies to this product.
|Product Name||1M LiTFSI in DME/DOL 1:1 (v/v) with 1wt% LiNO3 Electrolyte
||1 mol/L (1 M)|
|Free Acid (as HF)||≤30 ppm|
|Density (25 degree)||1.15±0.05 g/mL|
|Conductivity (ms/cm)||11.00±0.5 mS/cm|
- This electrolyte solution has extremely low water content (≤20ppm); Please handle under moisture free environment (preferably inside a glove box).
- Keep containers tightly closed. Keep away from heat and ignition sources.
- Store in a cool and dry place. Avoid storing together with oxidizers.
We Also Recommend
300g Battery Grade Lithium Magnesium (Mg 10 wt%) Alloy Foil 50 mm W x 100 um T for Battery Research