Thank you!

Your quote has been successfully submitted!

For products requiring additional information, our team will contact you within 1 business day

Failed

There was an error submitting your quote. Please try again.

New Argonne Battery Design Offers "Solid" Advantage - Dopant‐Dependent– MSE Supplies LLC

Free Shipping on MSE PRO Online Orders of $500 or More! U.S. Orders Only * Offer Excludes Hazmat Shipments *

Menu

New Argonne Battery Design Offers "Solid" Advantage - Dopant‐Dependent Stability of Garnet Solid Electrolyte Interfaces with Lithium Metal

Posted by MSE Supplies Admin on

Credit: Argonne National Laboratory/Sanja Tepavcevic

This multi-module ultrahigh vacuum system (in blue) allowed Argonne researchers to create and probe the interface of a solid electrolyte with a lithium metal anode without air exposure. This experiment correlated interfacial chemistry with the electrochemical response of the system.

Solid-state lithium batteries offer several advantages over those that use a liquid electrolyte; most notably, they allow for the use of lithium metal anodes that can store more energy in a smaller volume. Much of the chemical behavior of solid-state batteries remains unexplored, and scientists have turned their attention to the regions between the battery’s anode and its solid electrolyte.

In a new study from the U.S. Department of Energy’s (DOE) Argonne National Laboratory, researchers have identified a new boundary layer that emerges between a lithium metal anode and a lithium lanthanum zirconium oxide (LLZO) electrolyte. 

MSE Supplies is the exclusive distributor of Ampcera™ solid electrolyte materials, including LLZO, LGPS, LPS, Argyrodite, LAGP, etc.  Ampcera Inc. is a global leader in the development and commercialization of solid electrolyte materials for advanced battery applications. Its products are commercially available and have been ordered by more than 100 companies and research labs worldwide for the research and development of the next generation high performance lithium batteries. Order Ampcera™ solid electrolyte materials today to accelerate your research and product development. 

This boundary layer resembles the solid-electrolyte interphase region that exists in liquid-electrolyte batteries and that often dramatically impacts battery performance. Like the solid-electrolyte interphase, this “oxygen-deficient interphase” between the two solid battery components determines the stability of the battery as a whole. 

To improve the ability of the solid electrolyte to transfer lithium ions back and forth between the battery’s anode and cathode, and to stabilize the structure of the electrolyte, other metals were inserted into the LLZO electrolyte in a process called doping. 

The Argonne researchers studied LLZO doped with three metals: niobium, tantalum, and aluminum. Each of these metals had a different impact on the performance of the battery material. When the researchers sputtered lithium metal on the electrolyte doped with niobium, they found the electrolyte’s increased reactivity affected the oxygen-deficient interphase. This, in turn, drove up the resistivity of the material, causing the eventual failure of the battery as the lithium penetrated to the bulk of the electrolyte. 

“You can think of it as trying to have two surfaces of Velcro® latch on to each other perfectly. If you have a film or dirt that gets in the way, you’re not going to be able to make the connection.” — Argonne chemist Peter Zapol 

When the researchers used tantalum-doped material, however, a different picture emerged. The tantalum did not preferentially migrate to the region near the oxygen-deficient interphase, and as a result served to stabilize the electrolyte without driving up the resistivity. The aluminum occupied a different space in the lattice entirely. 

Creating the oxygen-deficient interphase required bringing the lithium anode into full, direct contact with the electrolyte — a procedure that is often complicated by the both LLZO and lithium metal exposure to the ambient environment. 

“You can think of it as like trying to have two surfaces of Velcro® latch on to each other perfectly,” said Argonne physicist Peter Zapol, one of the authors of the study. “If you have a film or dirt that gets in the way, you’re not going to be able to make the connection.” 

Calculations revealed that tantalum and niobium behave differently at clean lithium metal/LLZO interfaces, underpinning the oxygen-deficient interphase concept. 

In order to attain the maximum contact between the anode and the electrolyte, the researchers cleaned and polished the interfaces under ultra-high vacuum. “Approaches targeting this interface have run into difficulties getting the degree of contact necessary to reveal the full dynamics possibly present at the interface,” said Argonne materials scientist Sanja Tepavcevic, another author of the study. “With the tools we have at our disposal, however, we are able to see the full range of interfacial properties, as well as their relationship to the different dopants.” 

“We have only scratched the surface in understanding solid-state electrolyte interfaces,” added Argonne Distinguished Fellow and materials scientist Nenad Markovic. “Our integrated experimental and computational approach gives us the opportunity to look at intrinsic properties of these materials.” 

A paper based on the study, “Dopant-dependent stability of garnet solid electrolyte interfaces with lithium metal,” appeared in the March 27 issue of Advanced Energy Materials. In addition to Zapol and Tepavcevic, other Argonne authors included Yisi Zhu, Justin Connell, Brian Ingram, Larry Curtiss, John Freeland and Dillon Fong. Nathan Taylor, Regina Garcia-Mendez and Jeff Sakamoto from the University of Michigan also collaborated. 

Funding for the research was provided by DOE’s Office of Energy Efficiency and Renewable Energy and Office of Science, the latter in part through the Joint Center for Energy Storage Research, a DOE Energy Innovation Hub. 

The Office of Energy Efficiency and Renewable Energy supports early-stage research and development of energy efficiency and renewable energy technologies to strengthen U.S. economic growth, energy security, and environmental quality. 

Argonne National Laboratory seeks solutions to pressing national problems in science and technology. The nation’s first national laboratory, Argonne conducts leading-edge basic and applied scientific research in virtually every scientific discipline. Argonne researchers work closely with researchers from hundreds of companies, universities, and federal, state and municipal agencies to help them solve their specific problems, advance America’s scientific leadership and prepare the nation for a better future. With employees from more than 60 nations, Argonne is managed by UChicago Argonne, LLC for the U.S. Department of Energy’s Office of Science

The U.S. Department of Energy’s Office of Science is the single largest supporter of basic research in the physical sciences in the United States and is working to address some of the most pressing challenges of our time. For more information, visit the Office of Science website.


Related Posts

Maximizing Precision in HPLC and LC-MS with Birch Biotech’s High-Purity Solvents
Maximizing Precision in HPLC and LC-MS with Birch Biotech’s High-Purity Solvents
High-Pressure Liquid Chromatography (HPLC) and Liquid Chromatography-Mass Spectrometry (LC-MS) are two important anal...
Read More
The Exciting World of Single Atom Catalysts (SACs) and Their Applications
The Exciting World of Single Atom Catalysts (SACs) and Their Applications
Many aren't aware that even a single atom can be enough to change the whole course of the catalysis science. Single A...
Read More
Revolutionary Spectroscopy Method for Microplastic Detection in Soil
Revolutionary Spectroscopy Method for Microplastic Detection in Soil
Spectroscopy has expanded its capabilities in recent years, and there are new possibilities for using it to identify ...
Read More

Share this post



← Older Post Newer Post →