Nanoparticles and nano powder materials are central to modern material science, enabling control at the atomic level to enhance electrochemical performance, catalytic activity, and functional properties. These nanomaterials are widely applied in energy storage systems, catalytic processes, and high-performance materials development.
This category includes:
- Metallic nanoparticles such as gold nanoparticles, platinum nanoparticles, and Nickel NPs used in catalytic processes and energy and catalysis applications
- Carbon-based materials including carbon nanotubes, carbon nanoparticles, and graphene quantum dots for conductive and energy-storage devices
- Quantum dots for tunable optical and electronic properties in advanced materials and energy conversion
- Nanostructured electrode materials such as lithium metal oxide, silicon nanowire, and MoS nanosheets for lithium-ion batteries and lithium-sulfur batteries
- Supported metal nanoparticles and high surface area supports for heterogeneous catalysis and catalyst support systems
Selection should consider:
- Particle size and nanoparticle dispersion, impacting surface area, reaction efficiency, and electrochemical behavior
- Colloidal stability, including steric stabilization and electrostatic stabilization for consistent dispersion
- Synthesis methods, such as chemical reduction, influencing structure-performance relation
- Surface chemistry and oxygen vacancies, affecting catalytic reaction pathways and oxygen reduction reaction activity
- High surface area supports, essential for catalytic reaction efficiency and supported metal nanoparticles
Nanoparticles and nano powder materials are widely used in:
- Energy storage and conversion, including lithium-ion batteries, Li-ion batteries, lithium-sulfur batteries, fuel cells, and renewable energy systems
- Catalysis and chemical processing, including heterogeneous catalysis, bimetallic nanocatalysts, copper-based catalysts, and methanol synthesis
- Environmental applications, such as environmental remediation and carbon capture and utilization
- Advanced materials and coatings, supporting conductive carbon material systems and high-performance materials
MSE Supplies supports research and industrial workflows with nanoparticles and nano powder materials aligned to energy storage, catalytic processes, and advanced material applications. For technical guidance on material selection or integration into specific systems, the MSE Supplies team is available to assist.
Size, Shape, and What the Number Actually Means
Nanoparticle specifications are unusually easy to misread. A powder labeled 30 nm may consist of 30 nm crystallites locked into micron-scale agglomerates that never break apart in your solvent, and three different instruments will report three different diameters for the same sample without any of them being wrong. Knowing which number applies to your process matters more than chasing a smaller one.
Top-Down Production and Media Contamination
Not all nanomaterials come from solution chemistry. Mechanical size reduction is the practical route for hard oxides, carbides, and materials with no convenient precursor, and a ball mill for research labs in wet mode can reach the low hundreds of nanometers before energy input stops producing further reduction. Below that, bead milling with very fine media takes over. The catch is that every collision wears the media as well as the sample, so grinding media in zirconia, alumina, or hardened steel becomes a contaminant source proportional to run time. Longer milling improves the distribution and degrades the purity at the same time, which is why milled nanopowders are usually specified with a wear allowance rather than a purity figure alone.
Which Size Number Is Real
Techniques disagree because they measure different physical quantities. Dynamic light scattering reports a hydrodynamic diameter weighted by scattering intensity, which makes it sensitive to a small population of large aggregates and prone to overstating size. Surface area methods back-calculate an equivalent sphere from gas adsorption, which understates size for porous materials. Electron microscopy shows primary particles clearly but samples too few of them to describe a distribution. A particle size distribution analyzer based on laser diffraction covers the agglomerate range well and is the right tool for asking whether dispersion worked, though it loses resolution as particles approach the wavelength of light. The practical approach is to pair a distribution method with a primary-size method and treat any disagreement between them as information about agglomeration state.
Dimensionality Changes the Rules
Most of the intuition built around spherical nanoparticles fails for anisotropic materials. Nanotubes, nanowires, and sheets percolate at loadings far below what spheres require, because a single high aspect ratio object bridges distances that would need a chain of particles. That is an advantage for conductive networks and a problem for rheology, since the same geometry drives viscosity up sharply and narrows the processing window. Two-dimensional materials such as graphene oxide add a further variable, since sheet lateral size and layer count matter as much as thickness and neither is captured by a single diameter figure. Where the application does not actually require nanoscale behavior, micron powders often perform comparably at a fraction of the cost and with far simpler handling, so it is worth checking the complete selection of conventional grades before defaulting to nano.
Production route, measurement method, and particle geometry are linked, and a result that looks like a material problem is frequently a characterization problem instead. Our applications team can help match grade and format to your process. The full range sits within our Materials Science products catalog covering advanced materials, laboratory equipment, and consumables.
What to know before you buy
This collection spans battery materials, oxide nanoparticles, carbon and 2D materials, and a few non-powder forms. Battery researchers will find conductive additives such as Super C65 nano carbon black and acetylene black, a 200 nm PVDF nanopowder binder, silicon nanopowder at 50 nm and 150 nm, and garnet LLZO solid electrolyte powders in Al-doped 300 nm and Nb-doped 500 nm forms.
Oxide nanoparticles include aluminum oxide at 30, 100 and 300 nm, zinc oxide at 30, 50 and 90 nm, monoclinic zirconia, rutile titanium dioxide and iron (II,III) oxide. Carbon and 2D materials include multi-walled carbon nanotubes, carbon nanofibers, Ti3C2Tx MXene multilayer nanoflakes, hexagonal boron nitride flakes and ordered mesoporous carbon CMK-3. Some items come as films, dispersions or membranes, such as the silver nanowire dispersion and a carbon nanotube film.
To narrow down, settle composition, particle size and phase first, then compare purity and pack size on each listing. For a fuller walk-through, read How Do You Choose Nanopowder, Nanoparticles and Nanomaterials?
Frequently Asked Questions
How do I choose a particle size?
Smaller particles give more surface area per gram, which helps catalysis, sensing and reactive coatings, but they agglomerate more readily and are harder to disperse. Larger sizes, such as 300 nm alpha aluminum oxide, are easier to handle and suit polishing, fillers and ceramic work. Some products come in several sizes, like the 30, 50 and 90 nm zinc oxide.
Which conductive carbon should I use in battery electrodes?
Super C65 and acetylene black are carbon black additives that build electron paths between active particles in cathodes and anodes. Carbon nanotubes and nanofibers, such as the battery grade MWCNT and carbon nanofibers, form longer conductive networks at lower loading. Pair either with the PVDF nanopowder as binder.
What is the difference between the Al-doped and Nb-doped LLZO powders?
Both are garnet lithium lanthanum zirconate solid electrolyte powders, and the dopant helps stabilize the more conductive cubic phase. The Al-doped LLZO is 300 nm and the Nb-doped LLZO is 500 nm, so dopant chemistry and particle size both differ. Choose the one your method or reference paper uses.
Which mesoporous material suits adsorption or catalyst support work?
Both have ordered pore structures and high surface area. SBA-15 mesoporous silica is used for catalyst supports, adsorption and loading studies. CMK-3 ordered mesoporous carbon is a carbon replica of SBA-15, used in electrodes, as a sulfur host in lithium-sulfur cells and for adsorption.
Do you supply nanomaterials in forms other than dry powder?
Yes, a few. The silver nanowire dispersion is a liquid for coating transparent conductive films. The high conductivity carbon nanotube film is 5 to 15 µm thick, and the nanoporous PFAS-free PEEK membranes come in packs of 10. MXene is supplied as multilayer nanoflakes.
Can I get a different particle size, purity or quantity?
Yes. For a size, phase or purity not listed, or a larger lot of a listed product, send the composition, size, purity and amount through the quote request page. To order several materials together, use the bulk order request form.
