24 Products
MSE PRO Hydrogen Generator
Hydrogen generators are devices that produce hydrogen gas on demand for various applications such as laboratory use, industrial processes, and fuel cells. Two common types of hydrogen generators are Proton Exchange Membrane (PEM) hydrogen generators and Alkaline hydrogen generators.
1. Proton Exchange Membrane (PEM) Hydrogen Generators:
PEM hydrogen generators use a solid polymer electrolyte (SPE) to conduct protons from the anode to the cathode. Water is split into hydrogen and oxygen gases through electrolysis. PEM technology is known for producing high-purity hydrogen and offers quick start-up times, compact design, and efficient operation. These generators are commonly used in laboratories, small-scale industrial applications, and fuel cell systems.
2. Alkaline Hydrogen Generators:
Alkaline hydrogen generators use an alkaline electrolyte solution, typically potassium hydroxide (KOH), to facilitate the electrolysis process. This type of generator is cost-effective and has been used for large-scale hydrogen production for many years. It is known for its durability and the ability to produce large quantities of hydrogen, making it suitable for industrial applications.
MSE SUPPLIES offers both PEM and alkaline hydrogen generators, both of them have specific advantages and are chosen based on the required hydrogen purity, production volume, and application needs.
Your Quote Cart
Additional Info
Frequently Asked Questions
Should I choose a PEM or an alkaline lab hydrogen generator?
PEM generators split pure water across a membrane and need no caustic electrolyte, so they are simple to run and give high purity gas. The 6N models, such as the 6N PEM generator, 310 mL/min, suit GC carrier gas. Alkaline generators use a potassium hydroxide electrolyte and suit general fuel gas use.
How do I size a hydrogen generator?
Add up the peak flow of every instrument it will feed, then pick a generator with a higher maximum flow. A single GC with an FID often fits a 210 or 310 mL/min unit. Several instruments or a larger process may need 1, 2 or 5 L/min units.
When do I need a high-pressure model?
Some instruments and gas lines need higher inlet pressure than a standard generator gives. The high-pressure 0.7 MPa PEM generator suits these cases and comes in 210, 310 and 510 mL/min versions. Check your instrument inlet pressure before choosing.
What are the PEM hydrogen production systems for?
The production systems are rated in normal cubic meters per hour, from 0.6 to 50 Nm3/h, well above lab generator output. They suit pilot plants, fuel cell testing, heat treatment and other industrial hydrogen generator uses. The 10 Nm3/h system is a mid-range option.
What water and upkeep do hydrogen generators need?
PEM generators need deionized or ultrapure water to protect the membrane. Alkaline units need their electrolyte level checked and refilled with water. Replace drying cartridges as the manual describes. Install generators in a ventilated area and check fittings for leaks.
Can I order a hydrogen generator with a custom configuration?
Yes. For a specific flow rate, pressure, purity or voltage, or a production system sized to your site, send your requirements through the quote request form. For several identical units, use the bulk order request form.