31 Products
Glass and Quartz Wafers
Both standard and custom made glass wafers are available from MSE Supplies
BoroFloat 33
Borosilicate BK7
JSG1, JGS2, Corning 7980 Fused Silica
Soda Lime Glass
Silica Quartz Single Crystal
and other Glass/Quartz Wafers
Best sellers
- MSE PRO SiO2 Silica Quartz Single Crystal Wafers and Substrates
- MSE PRO 100 mm JGS2 Fused Silica Wafer, 500 um Thick, DSP, w/ Bevel, Primary Flat Only
- MSE PRO 1.1 mm Thick Uncoated Soda Lime Glass Substrates, >90% Transmittance
- MSE PRO 2.2 mm 7-8 Ohm/Sq FTO TEC 7 Coated Glass Substrates
- MSE PRO 2.2 mm 12-15 Ohm/Sq FTO TEC 15 Coated Glass Substrates
- MSE PRO 100 mm Schott Borofloat 33 Glass Wafer, 500 um Thick, DSP, w/ Bevel, Primary Flat Only
Your Quote Cart
Additional Info
What to know before you buy
Silica glass and other optical glasses in wafer form are the base for MEMS, microfluidics, optics and wafer bonding work. This collection lists double side polished glass and quartz wafers in 1 inch to 200 mm diameters, most 500 microns thick with a bevel.
Fused silica wafers come in JGS1, JGS2 and JGS3 grades and as Corning 7980 HPFS. JGS1 is the UV grade, so the 100 mm JGS1 UV grade fused silica wafer suits deep UV optics and lithography tests. JGS2 is a general optical grade, and JGS3 is chosen for infrared transmission. The 100 mm Corning 7980 HPFS wafer offers high purity synthetic fused silica.
Borosilicate options include the 100 mm Schott Borofloat 33 glass wafer, widely used for anodic bonding to silicon, plus Schott N-BK7, Schott D263, Corning EAGLE XG and Corning ULE 7972. Single crystal quartz wafers, soda lime glass and FTO coated glass substrates are also listed. For background on how these wafers are made, read 6 Steps Involved In Making of Glass Wafers.
Frequently Asked Questions
What is the difference between fused silica and quartz wafers?
Fused silica is amorphous silica glass, with no crystal structure, so its properties are the same in every direction. Single crystal quartz wafers are crystalline and piezoelectric, with properties that depend on the cut. Choose quartz for resonators and acoustic devices, and fused silica for optics and microfluidics.
Which fused silica grade should I choose: JGS1, JGS2 or JGS3?
JGS1 is the UV grade for applications down into the deep UV. JGS2 covers visible and general optical work at a lower cost basis. JGS3 is the infrared grade. Pick the grade by the wavelength range your device or measurement uses.
When should I use Borofloat 33 instead of fused silica?
Borofloat 33 has a thermal expansion close to silicon, which makes it the usual choice for anodic bonding in MEMS and microfluidic chips. It is easier to etch and dice than fused silica. Borofloat wafers are listed in 3 inch, 100 mm and 200 mm sizes.
What wafer sizes and flats are available?
Listed sizes run from 1 inch up to 200 mm, depending on the material. Most wafers are 500 microns thick, double side polished, with a bevel and a primary flat. Some, such as the Corning ULE 7972 wafer, have no flat. Check each title for thickness and flat details.
Can I order glass wafers in a custom size or thickness?
Yes, both standard and custom glass wafers are available. Send the material, diameter, thickness, polish and flat requirements through the quote request form. For larger quantities of a listed wafer, use the bulk order request form.