Coated Glass and Glass Substrates

MSE Supplies is the industry-leading source for all transparent and conductive substrates. We provide a wide range of coated glass and glass substrates. We can customize the dimensions, thickness and coating or doping levels to meet your specific needs.

Discover ITO Glass / PET Substrates, FTO Glass Substrates and AZO Glass Substrates.

Glass substrates can be cut with precision glass cutters.

Click here to shop for Scribing, Cleaving and Cutting Tools for Wafers, Glass and Crystal Substrates

Best sellers

Learn More

42 Products

Additional Info

Depositing and Characterizing Functional Layers on ITO and FTO Glass Substrates

ITO and FTO conductive glass substrates serve as the transparent electrode in photovoltaic cells, electrochemical cells, and optoelectronic devices. The substrate's sheet resistance and optical transmittance are fixed at the point of manufacture, but device performance is determined by what is deposited on top of it and how well that layer is characterized. The tools and materials that surround conductive glass work at three points: selecting compatible reference substrates, supplying the deposition source material, and placing the finished electrode in its application context.

Crystalline Reference Substrates and Substrate Sectioning

Depositing the same functional layer on an ITO slide and on silicon wafers and substrates under identical conditions isolates the role of substrate conductivity and surface chemistry in film adhesion and morphology. Crystalline substrates provide an atomically smooth, chemically defined reference that makes it possible to attribute differences in film quality to the conductive oxide surface rather than to process variation. Wafer cleaving and cutting tools section coated glass into defined electrode areas or test coupon geometries without crack propagation that would delaminate or fracture the conductive layer.

Sputtering Target Materials for Functional Layer Deposition

The transparent conductive layer is the starting point for functional deposits added by physical vapor deposition. Sputtering targets in metal oxide, metal, and ceramic compositions deposit hole transport layers, electron transport materials, and reflective back contacts onto FTO or ITO glass; view all options across the full target catalogue. Target composition and purity govern the stoichiometry of the deposited film, which controls carrier mobility and optical loss in the completed device stack independently of the substrate's own electrical properties.

Solar Cell and Photonic Application Context

ITO and FTO glass are the primary transparent electrode in dye-sensitized, perovskite, and thin-film photovoltaic cells, where the substrate must transmit light while conducting charge from the active layer to the external circuit. Solar cell materials including absorber layers, hole transport materials, and encapsulants connect the conductive substrate to the full photovoltaic device stack. ITO's high visible-range transmittance also makes it a platform for optical components in optoelectronic devices where the electrode layer must not attenuate the signal passing through it.

Device performance built on conductive glass is set jointly by the substrate's optical and electrical properties and by the layers deposited on it. Selecting a compatible deposition material, sectioning substrates to the required electrode geometry, and validating results against a crystalline reference surface each constrain the interpretation of device-level measurements. For an overview of all laboratory instrumentation and materials available from MSE Supplies, the Materials Science products hub covers the full catalogue across research categories.

Frequently Asked Questions

Should I choose an ITO or FTO glass substrate?

ITO glass has lower sheet resistance at a given thickness and a smooth surface, which suits OLEDs, displays and most thin-film devices. FTO glass holds up better at high temperature, so it suits dye-sensitized and perovskite solar cells that need sintering. See Comparing ITO, FTO and AZO Films for a detailed comparison.

How do I choose sheet resistance for coated glass?

Lower sheet resistance means better conduction but usually a thicker coating and slightly lower transmittance. Electrodes that carry current, such as in solar cells, often use the low range, for example the 1.1 mm 7 to 10 ohm/sq ITO coated glass. Sensors and touch layers can use 100 ohm/sq options.

Which glass thickness should I order?

Match the thickness to your holders, spin coater chuck and device stack. ITO glass is listed from 0.33 mm thin glass up to 1.1 mm. FTO glass runs from 0.7 mm to 3.2 mm, including the 2.2 mm TEC 15 FTO glass. Thinner glass weighs less but breaks more easily.

Do you carry uncoated or flexible substrates?

Yes. Uncoated soda lime glass comes in 0.7 mm and 1.1 mm thicknesses for control samples or your own coatings. For flexible devices, the MSE PRO ITO coated PET film gives a bendable transparent electrode.

Can I order coated glass in a custom size or coating?

Yes. We can customize the dimensions, thickness and coating or doping levels. Send your size, sheet resistance target and quantity through the quote request form. For larger volumes of a listed substrate, use the bulk order request form.