Eight-Channel Battery Charge and Discharge System
MSE Supplies offers various function-specific models applicable to various measurements for Battery basic research etc.
This item can provide the half-cell measurement by 3-electrode-method using the reference electrode and can provide the each characteristics evaluation test on positive and negative material (on independent four terminal and realizing the high input impedance).
- Independent 8-channel charge and discharge control.
- Software and connectors included.
- Minimum data sampling time interval is 10 ms.
- Equipped with transient recorder function that collects the transient data at 10 ms.
(at a moment of switching to discharge mode from charge mode during long-hour measurement.)
- Equipped with CC-CV operation which has digital control for minimum overshoot.
- The digital filter reduces noise.
- Function at the setting of more than 500ms data saving time interval.
- Equipped with Constant Power Control mode and Constant Resistance Control mode.
- Capability to program maximum 20steps and 50patterns.
- Equipped with jump function which repeats the continuous few patterns.
- Equipped with High speed multi-step function:
1step-20stages(max) and 1stage can set at 10ms(minimum)
- Capability to control the maximum 16 units (128 channels) by using the server PC and client PC.
Made in Japan.
|Control||Voltage||-2 to 10 V|
|Step time||0.1 sec. to 100 days resolution 0.1 sec.|
|Current||1A, 100mA, 10mA, 1mA, 100uA, Auto|
|Control method||CC, CC/CV, CP, CP/CV, CR|
|Communication||Connect to PC by Ethernet|
|Control accuracy||Voltage||±0.05% of control ±1mV|
|Current||±0.05% of control ±0.05% F.S. (over 10% of F.S.)|
|Voltage||±0.05% of reading ±1mV|
|Current||±0.05% of reading ±0.05% F.S.|
|Protective circuit||overvoltage / overcurrent / voltage line disconnection detection|
We Also Recommend
300g Battery Grade Lithium Magnesium (Mg 10 wt%) Alloy Foil 50 mm W x 100 um T for Battery Research