Cleaver Scientific omniPAGE Mini – Accessories

Cleaver Scientific omniPAGE Mini – Accessories

omniPAGE Mini – Inner Running Module

Dual-purpose PAGE inserts eliminate the time-consuming transfer of glass plates between separate casting and running modules.

The insert features sliding clamps that enable quick setup for both hand-cast and precast gels. Ultra-soft silicone seals and pressure bars around the glass plates ensure a leak-proof gel casting process.

Rapid gel casting and loading Accommodate up to four gels in tetrad model Compatible with all 10 x 8 and 10 x 10cm (WxL) precast gels

omniPAGE Mini – Cooling Block.

The easy-to-use cooling pack system provides improved resolution without the need for expensive or time-consuming extra equipment. No chiller, tap, or bulky connecting leads are necessary. Simply pre-chill the cooling pack in a freezer and place it in the gel tank. Furthermore, using cooling packs helps reduce buffer volume, potentially saving money on important reagents.

Mini Cooling Pack for omniPAGE Mini.

omniPAGE Mini – IEF Conversion kit for 2 x 7cm IPG strips

omniPAGE Mini – Silicone Gasket (PK/1)

Replacement silicone gasket seals inner buffer chamber. For use with omniPAGE Mini vertical electrophoresis system.

omniPAGE Mini lid, No cables

Replacement Lid for omniPAGE Mini vertical electrophoresis system. Electrodes and lead are not included.

omniPAGE Mini Tank

Replacement tank for omniPAGE Mini vertical electrophoresis system.

omniPAGE clamp opener & plate separator

Replacement key to separate the omniPAGE glass plates.

omniPAGE Mini Packages

Cleaver Scientific Mini Vertical systems are predominantly used for protein electrophoresis. They include the OmniPAGE CVS10TETRAD systems equipped with enough combs and glass plates to run 4 gels, and the standard OmniPAGE CVS10 systems, which accommodate up to 2 handcast or commercial precast gels.

By combining both functionality and ease of use, the OmniPAGE CVS10TETRAD and standard OmniPAGE CVS10 systems set the bench mark for simple, versatile vertical mini gel electrophoresis. Each OmniPAGE electrophoresis system can accommodate up to 4 handcast gels and 2 commercial precast gels to provide complete flexibility for individual research needs, while unique sliding clamp technology within the PAGE insert facilitates fast, intuitive leak-free casting.

With a trouble-free set up and consistent performance, the OmniPAGE Mini Vertical systems are perfect for today's laboratories, where the ability to generate reproducible results quickly is essential.

Complete packages for PAGE, Blotting and 2D electrophoresis Modular Inserts allow use of a single buffer tank Available with Power Supplies

Specifications:

omniPAGE Mini Tube Gel Insert

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

These stand-alone, complete units for first dimension capillary/tube gel electrophoresisÌ´Ì_include omniPAGE tank and lid, tube gel insert, tubes and blanking ports

omniBLOT Mini Insert

Replacement mini-insert for OmniBlot Mini, 10 x 10cm Blotting System. Including 4 cassettes and 16 foam pads.

OmniBLOT Mini High Intensity Insert

Replacement mini-insert Mini High Intensity Insert for OmniBLOT Mini 10x10cm. Including 2 cassettes and 8 foam pads.

Mini Capillary Tubes, 75mm x 1mm ID- Pack of 100

1mm internal diameter mini capillary tubes. For use with the VS10DC omniPAGE Mini Tube and omniPAGE Mini Wide, Tube Unit.

Mini Capillary Tubes, 75mm x 1.5mm ID – Pack of 100

1.5 mm internal diameter mini capillary tubes. For use with the VS10DC omniPAGE Mini Tube and omniPAGE Mini Wide, Tube Unit.

Mini Capillary Blanking ports – Pack of 10

Blanking Plugs for mini capillary tubes. For use with the VS10DC omniPAGE Mini Tube and omniPAGE Mini Wide, Tube Unit.

omniPAGE Mini Tube Unit

These stand-alone, complete units for first dimension capillary/tube gel electrophoresis, Mini 10x10cm, Mini Wide 20x10cm and Maxi 20x20cm formats, include omniPAGE tank and lid, tube gel insert, tubes and blanking ports. Units are interchangeable with omniPAGE slab gel and electroblotting inserts.

Mini 10x10cm, first dimension capillary tube gel electrophoresis system. Includes omniPAGE tank and lid, tube gel insert, tubes and blanking ports.

Instructions

• VS10 MANUAL(PDF)
• TSL - CVS10CBS, CVS10TETRAD1CBS & SB10 manual V1.0(PDF)

Product Flyers

• Cleaver Scientific catalog page 34(PDF)
• OMNIPAGE.WEB(PDF)

MSE Supplies is an authorized supplier of Cleaver Scientific (Thistle Scientific) products. Please contact us if you need more information regarding Cleaver Scientific products and equipment.