MSE PRO Semiconductor Powder Resistivity Tester

MSE PRO™ Semiconductor Powder Resistivity Tester

MSE PRO™ Semiconductor Powder Resistivity Tester is an integrated and intelligent measuring instrument that tests the "resistivity pressure" characteristic curve of powder with 100% accuracy.

Technical Specifications：

System requirements

CPU Clock Speed: Above P3 450MHz 

Operating System: Above Windows XP/7

Office Software: Office (Activated）

Communication: USB

Measuring range resolution
Resistivity：15.0×10-6 ～ 200.0×103 Ω-cm resolution：1.5×10-6 ～ 0.1×103 Ω-cm (1.0×10-6 ～ 200.0×101 Ω-cm resolution：0.1×10-6 ～ 0.1×101 Ω-cm）

Allowable measurements of powders
All kinds of powder

Range Division and accuracy degree (the grade of errors)

Digital Voltmeter

Range：200mV ～ 2.0V，automatic measurement
Display: 4-digit Significant Number， Maximum display 200.0 Unit automatic display

Digital controlled const current source

Current output： Direct current 0.1µA～1000mA （Adjustable) ，The system can be adjusted step by step automatically.

Partial parameters of powder test stand

• Powder size: Recommended below 40 meshes, maximum particle size not more than 10 meshes, too fine without impact!
• Container volume: internal diameter：Φ11.28mm（S=1.0cm2） height：0～20mm, Monitoring with Height Sensor， measurement error：±0.05mm.
• Test pressure
  Standard pressure：P0=4Mpa±0.05Mpa. Pressure range: MAX = 30Mpa, P=0～30Mpa.
• Manual adjustable pressure
  Electronic Digital Display Pressure Value！00.00～20.00MPa，resolution：±0.01 MPa
• Test table size：250mm（width）×220 mm (length）×540mm（height） Weight：10Kg

Power Supply
Power consumption：< 10W input:110V±10% 60Hz

The working parameters of instrument
Temperature： 0-40℃ relative humidity： ≥60%
No strong electromagnetic interference, not sharing power with high frequency equipment.