MSE PRO Aluminum Laminated Film For Pouch Cell Case (400 mm wide, 12.5 m long, 113um thick)
Product Details:
Pouch cell is a type of battery design which is simple, flexible and lightweight. Compared with other battery design, pouch cell has the best packing efficiency, 90~95%. Moisture is one of key factor which shorten cell life. This aluminum laminated film (113 μm) is widely used as pouch cell casing material due to its low moisture transmission rate.
|
SKU # |
BR0119 |
| Pack | 5 square meter/roll |
|
Layers from outside (Shiny) to inside
|
Polyamide (JIS Z1714): 0.025mm (+-0.0025mm) |
|
Thickness: |
113μm |
|
Width |
400mm |
|
Length |
12.5m |
|
Molding Depth |
≥5.0mm |
|
Electrical Insulating |
Good |
|
Hot Sealing Condition |
180-190°C |
|
Moisture Vapor / O2 Transmission Rate |
200ppm / 5 years |
|
Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
|
Heat Seal Strength |
More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec heat sealing |
|
Solvent Retention |
Less than 5mg/m2 |
|
Appearance |
Within the sample of the limit |
|
Slip Factor |
CPP/CPP less than 1.0 |