Microelectrode - 6 mm Dia. Glass Body

  • £36500

This is a single core Microelectrode in which a wire of electrode material (Platinum) is melted into the glass body on about 5 mm from the terminal end. The terminal end of the microelectrode is polished to a mirror finish, exposing solely the cross-sectional surface of the wire.
It well fits aqueous and organic solvent electrolyte requirements, except highly alkaline solutions, due to the limited glass chemical resistance.

Application note:
Typically, the microelectrode is immersed in the ion-conducting solution as a working electrode. An electric current is passed between the working electrode and the counter electrode for a certain amount of time. After the experiment, the electrode should be washed several times with ethanol. If the microelectrode was used as a current collector with other electrode material, it should be polished down to the mirror surface after the experiment is completed. Store the microelectrode in the glass tube sealed with an O-Ring (all included in the package). Instruction on maintenance is provided on the Electrode Polishing Kit product page.

Body material: soda-lime glass
Plug material: PEEK
Body diameter: 6 mm
Body length: 70 mm

Intrastat data:
NET weight: 100 g

Product includes:
1 x microelectrode
1 x O-Ring
1 x glass tube

We Also Recommend
Pt and Au wire 0.6 mm dia., 10 mm length unit,  MSE Supplies

Pt and Au wire 0.6 mm dia., 10 mm length unit

Liquid Junction Adapter, 6 mm Dia. - MSE Supplies LLC

Liquid Junction Adapter, 6 mm Dia.

Nanoporous PEEK Membrane (Pack of 10) - MSE Supplies LLC

Nanoporous PEEK Membrane (Pack of 10)

Plug 6/20mm - MSE Supplies LLC

Plug 6/20mm

Electrode Polishing Kit - MSE Supplies LLC

Electrode Polishing Kit