Menu

High Purity Crucibles-Selection and Applications

Posted by Chia-yu Chen on

Crucibles are widely used in thermal and e-beam evaporation, crystal growth, and sintering applications. The two major factors of selecting crucibles are thermal and chemical compatibility.  The temperature range and the degree of corrosion resistant vary based on the crucible materials. The common crucible materials include aluminum oxide, graphite, quartz, boron nitride, tungsten, zirconia etc.

MSE Supplies offers various crucibles and provide custom service. Below are some suggestions and guidelines for finding suitable crucibles

Evaporation deposition

Crucibles can be used in e-beam evaporation and thermal evaporation deposition. The materials to be evaporated are placed in a crucible. It requires high temperature to evaporate the materials. Below are some applications using different crucible materials.

                                                     

Crucible

Alumina

graphite

Recommend Max working temperature

1,600 °C

400 °C (air), 2000 °C (non-oxidizing environment)

Applications

Sb, Au, Co, Cu, Ga, Ge

Sb, B, In, MgO, Cu

                                                       

Crucible

Boron nitride

Quartz

Recommend Max working temperature

900 °C (air), 2100 °C (vacuum), 2000 °C (N2 or Ar)

1200 °C

Applications

MoO3, Au, Sb, Al

ZnSe, AgCl, CoCl, Cs

 

Sintering

Sintering is the process of compacting solid materials by pressure or heat, which is in control of densification and grain growth. Sintering is used in many applications such as metallic powder sintering, ceramic sintering, plastic sintering etc. For example, one of the recent ceramic sintering is used in solid-state electrolyte LLZO densification and grain growth.

                                              

Crucible

MgO

Alumina

Zirconia

Recommend Max working temperature

2,200 °C

1,600 °C

1800 °C (air); 2100 °C (N2 or Vacuum)

 

Applications

LLZO

LLZO

LLZO, Fuel cell electrolyte: Ba(Zr,Ce,Y)O3−δ (BZCY)1

Note

Showed higher Li content and relative density than using alumina crucible2

Al3+ contamination may affect Ga doping

 

 

Crystal growth

Various crystal methods such as Czochralski (Cz) and  Edge-Defined Film-Fed Growth (EFG)  require using crucibles. The Cz crystal growth technology has been used for production of single crystals such as Si and Ge. The Cz method is to melt materials in a crucible and then insert a small seed crystal rod into the melt. The single crystal can be obtained while pulling the seed rod upwards.

(Li et al., 2022)6

                         

MSE Supplies offers various crucibles that are commonly used for crystal growth.

                                            

crucible

Quartz

Tungsten

Molybdenum

Recommend Max working temperature

1200 °C

Melting point 3407°C

1700 ℃

Applications

Si single crystal

Sapphire crystal3, AIN4

Sapphire crystal5

 

Melting and casting

Melting and casting is the process of making objects by pouring molten materials into a mold. Different metals sometime require different types of crucibles for meting to prevent molten metals to attack crucible or contaminations from crucible. One of the common laboratory applications for melting and casting is XRF sample preparations. The ideal XRF analysis requires perfect flat surface. The fused bead method can provide a good homogeneous representation of the sample for solids. The fused beads are created by mixing samples that is finely powdered with a flux and heating to 900C-1200C in a platinum crucible. The sample is dissolved in the flux, and it is then cast into a mold. 

                                        

Crucible

graphite

Tantalum

Platinum

Recommend Max working temperature

400 °C (air), 2000 °C (non-oxidizing environment)

Melting point 3017°C; resistant to molten metals (Na, Li, Mg, K, Ag) at up to 1100°C

Recommend use temperature: <900 °C.

Application

Al

Lithium7

XRF sample preparation

 

MSE Supplies (msesupplies.com) is a major global supplier of high purity crucibles. Both standard and customized products are available from MSE Supplies. If you need something not listed on our website, please email us at sales@msesupplies.com and we will prepare a quote for the customized products for you.  If you have any questions, please email us at tech@msesupplies.com.

 

 

Reference

 

  1. Huang, Y.; Merkle, R.; Maier, J., Effects of NiO addition on sintering and proton uptake of Ba(Zr,Ce,Y)O3−δ. J. Mater. Chem. A 2021, 9, 14775-14785.
  2. Jiang, Y.; Zhou, Y.; Hu, Z.; Huang, Y.; Zhu, X., MgO or Al2O3 crucible: Which is better for the preparation of LLZ-based solid electrolytes? Ceramics International 2020, 46 (3), 3367-3373.
  3. S.Akselrod, M.; J.Bruni, F., Modern trends in crystal growth and new applications of sapphire. Journal of Crystal Growth 2012, 360, 134-145.
  4. Liu, B.; Edgar, J. H.; Gu, Z.; Zhuang, D.; Raghothamachar, B.; Dudley, M.; Sarua, A.; Kuball, M.; III, H. M. M., The Durability of Various Crucible Materials for Aluminum Nitride Crystal Growth by Sublimation. Materials Research Society Internet Journal of Nitride Semiconductor Research 2014, 9.
  5. Harris, D. C., A century of sapphire crystal growth: origin of the EFG method. Optical Materials and Structures Technologies IV 2009, 7425.
  6. Li, Y.; Sun, L.; Liu, H.; Wang, Y.; Liu, Z., Preparation of single-crystal metal substrates for the growth of high-quality two-dimensional materials. Inorg. Chem. Front 2021, 8, 182-200.
  7. Akhtar, N.; Akhtar, W.; Wu, S. J., Melting and casting of lithium containing aluminium alloys. International Journal of Cast Metals Research 2015, 28 (1).

 

Related Posts

Mastering Precision: A Comprehensive Guide to Advanced Tools in Pouch Cell Fabrication
Mastering Precision: A Comprehensive Guide to Advanced Tools in Pouch Cell Fabrication
Pouch Cell Fabrication is a series of processes where each stage contributes to the quality and efficiency of the end...
Read More
Superior Hand Protection: All About Nitrile
Superior Hand Protection: All About Nitrile
Disposable gloves are widely used and there are a lot of different types, but nitrile takes the cake because of its s...
Read More
Navigating the Invisible: Infrared Spectroscopy & Its Key Players
Navigating the Invisible: Infrared Spectroscopy & Its Key Players
Step into the captivating world of Infrared Spectroscopy, where the invisible becomes visible and molecular secrets a...
Read More

Share this post



← Older Post Newer Post →