42 Products
Yttrium Stabilized Zirconia YSZ Milling Media
Yttria stabilized zirconia milling media from 0.1 mm microbeads to 30 mm balls, in spherical and cylindrical shapes, for ball, bead and roller mills.
MSE Supplies offers yttrium stabilized zirconia YSZ beads ranging from 0.1mm to 30mm.
Ceria-stabilized zirconia milling media beads are also available.
Your Quote Cart
Additional Info
What to know before you buy
Zirconia balls stabilized with yttria are a common choice for zirconia milling of ceramics, battery materials, pigments and pharmaceuticals. YSZ media is hard, dense and wear resistant, so it grinds efficiently and adds little contamination to the powder.
Sizes run from CHEMCO micro milling media at 0.2 mm to 2.5 mm, used in bead mills and for fine wet grinding, up to MSE PRO spherical media from 3 mm to 30 mm for planetary and roller mills. Common picks are the MSE PRO 5 mm spherical YSZ milling media and the MSE PRO 10 mm spherical YSZ media. For sub-micron grinding, the CHEMCO 0.3 to 0.4 mm YSZ micro milling media suits stirred bead mills.
Cylindrical YSZ media, from 5.5 mm to 15 mm, gives line contact instead of point contact, which helps with shearing and fine dispersion. The CHEMCO 0.1 mm zirconia beads are sized for DNA, RNA and protein extraction. Our guide on the right milling media size for ball milling explains how to choose.
Frequently Asked Questions
What size zirconia balls should I use?
Use larger balls to break coarse feed and smaller balls for fine grinding. A common rule is to keep the media much larger than the largest feed particle. Many labs start with 5 mm or 10 mm media in planetary mills and step down to micro media for the final size.
Should I choose spherical or cylindrical YSZ media?
Spherical media is the standard for planetary and roller mills and rolls freely. Cylindrical media, such as the 10 mm cylindrical YSZ media, gives more contact area, which favors shearing and dispersing over impact. Some labs mix the two.
When do I need micro milling media below 1 mm?
Micro media, such as the CHEMCO 0.4 to 0.6 mm YSZ beads, suits bead mills and wet grinding to sub-micron or nano sizes. The small beads give many contact points per volume. Check that your mill screen or separator can hold back the bead size you choose.
Why choose YSZ over other milling media?
YSZ is denser and tougher than alumina or glass, so it grinds faster and wears less. Low wear means less contamination, which matters for battery, electronic and medical materials. Stainless steel is denser still but can add iron, so YSZ suits work where metal contamination is a concern.
Can I order zirconia milling media in bulk or a size not listed?
Yes. YSZ beads are available from 0.1 mm to 30 mm, and ceria-stabilized zirconia media is also available. For larger amounts, use the bulk order request form. For a size or shape not listed, use the quote request form.