Neware CE-4008Q-5V15A-S1, 5V15A Battery Cell Tester, 8 channels
Couldn't load pickup availability
Still have questions? Ask our experts!
Neware CE-4008Q-5V15A-S1, 5V15A Battery Cell Tester, 8 channels
Introduction
The Neware CE-4008Q-5V15A-S1, 5V15A Battery Cell Tester, 8 Channels is a high-precision battery testing system designed for charge/discharge cycling, pulse testing, and DCIR measurement. With 8 independent channels, up to 5V / 15A per channel, and support for multiple operating modes, it is suitable for battery research, performance evaluation, and routine laboratory testing.
Built with independent channel control, Kelvin 4-wire connection, and a closed-loop structure for both constant current and constant voltage sources, this tester delivers accurate, stable, and reliable electrochemical testing performance.
Key Features
- 8 independent testing channels
- Up to 5V / 15A per channel
- Voltage accuracy of ±0.02% FS
- Current accuracy of ±0.02% FS
- Supports CC, CV, CCCV, CP, and CR modes
- Pulse testing supported with minimum pulse width of 100 ms
- DCIR supported
- Kelvin 4-wire connection for accurate sampling
- Minimum data record interval of 100 ms
- TCP/IP communication and MySQL database support
- Supports offline testing and power-off data protection
Specifications
| Model | Neware CE-4008Q-5V15A-S1, 5V15A Battery Cell Tester, 8 Channels |
| Channel Counts | 8 channels |
| Input AC (Single Unit) | 220V / 60Hz |
| Input AC (Full Rack, 10 Units) | 380Vac ±10% / 60Hz (3-phase-5-wire); 208Vac ±10% / 60Hz (3-phase-5-wire) |
| Input Power (Single Unit) | 860 W |
| Resolution | AD: 24 bit; DA: 16 bit |
| Input Impedance | ≥100 MΩ |
| System Efficiency | >70% |
| CV Output Range | 25 mV to 5 V |
| Minimum Discharge Voltage | 2 V (with 3.0 m cable) |
| Voltage Accuracy | ±0.02% of FS |
| Voltage Stability | ±0.04% of FS |
| Output Range / Channel | R1: 300 mA; R2: 3 A; R3: 6 A; R4: 15 A |
| Current Accuracy | ±0.02% of FS |
| CV Cut-off Current | R1: 0.6 mA; R2: 6 mA; R3: 12 mA; R4: 30 mA |
| Current Stability | ±0.04% of FS |
| Output Power / Channel | 75 W |
| Power Stability | ±0.08% of FS |
| Current Response Time | ≤1 ms (10% to 90% or 90% to 100%) |
| Current Reverse Time | ≤10 ms (10% to 90% or 90% to 100%) |
| Working Step Time | ≤ 365 × 24 hrs / step |
| Time Format | 00:00:00:00 (hr:min:s:ms) |
| Min Data Record Interval | 100 ms |
| Min Voltage Change | 5 mV |
| Min Current Change | R1: 0.2 mA; R2: 1.2 mA; R3: 2.4 mA; R4: 6 mA |
| Record Frequency | 10 Hz |
| Charge Modes | CC / CV / CCCV / CP |
| Charge Cut-off Condition | Voltage / Current / ΔTime / Capacity / Energy / -ΔV |
| Discharge Modes | CC / CP / CR / CV / CCCV |
| Discharge Cut-off Condition | Voltage / Current / ΔTime / Capacity / Energy |
| Pulse Charge | CC / CP |
| Pulse Discharge | CC / CP |
| Minimum Pulse Width | 100 ms |
| Pulse Counts | Up to 32 |
| Continuous Switching | Supports continuous charge steps or continuous discharge steps; does not support charge-to-discharge switching |
| Pulse Cut-off Condition | Voltage / ΔTime |
| DCIR | Supported |
| Max Cycles | 65535 |
| Max Steps | 254 |
| Cycle Nest | Max. 3 |
| Protection | Power-off data protection; off-line operation mode; user-defined protection conditions |
| IP Protection Level | IP20 |
| Channel Feature | Independent pairs of closed loop for CC source and CV source |
| Channel Control Mode | Independent control |
| Data Acquisition Method | Kelvin connection (4-wire) |
| Noise | <75 dB (measured at 1.0 m distance) |
| Database | MySQL |
| Communication | TCP/IP |
| Operating System | Windows 7 / 8 / 10, 64 bit |
| Data Export | Excel / TXT / CSV / PDF / Plot / Graph |
| Disk Drive | 500 GB |
| Communication Port | Ethernet port |
| Operating Temperature | 0 to 40°C |
| Accuracy Guarantee Temperature | 25 ± 10°C |
| Storage Temperature | -10°C to 50°C |
| Operating Humidity | ≤70% RH, no moisture condensation |
| Storage Humidity | ≤80% RH, no moisture condensation |
| Single Tester Dimensions | 483 × 404 × 130 mm |
| Full Rack Dimensions | 660 × 760 × 1950 mm |
| Cable Length Options | 0.5 m; 3.0 m |
| Clamp Options | Polymer pouch-cell clamps; ring connector; alligator clips |
Applications
This battery cell tester is suitable for:
- Charge and discharge cycling tests
- Pulse testing and DCIR analysis
- Battery performance evaluation
- Laboratory battery research and development
Important Notes
- This battery tester does not include a middle machine. If required, the middle machine must be purchased separately.
- The default fixture supplied with this unit is the polymer clamp, and the default channel cable length is 0.2 meters. The polymer clamp is shown in the image below.
- If you require a different type of clamp, please contact MSE Supplies directly.
MSE Supplies is an authorized distributor of Neware in the USA. The product figure is for reference only. The actual product may look different based on the product configuration.
MSE Supplies is a US-based leading supplier of battery research materials and equipment with thousands of customers worldwide.