Protein Carbonyl Colorimetric Assay Kit (Tissue and Serum Samples)
Couldn't load pickup availability
Consumables Product
This consumable product is not available for refund or return
Still have questions? Ask our experts!
Protein Carbonyl Colorimetric Assay Kit (Tissue and Serum Samples)
| SKU # | E-BC-K117-S |
| Detection Instrument | Spectrophotometer (370 nm) |
| Detection Method | Colorimetric method |
Product Details
Properties
| Sample Type | Serum, plasma, hydrothorax, cell culture supernatant, tissue |
| Sensitivity | 0.02 nmol/mgprot |
| Detection range | 0.02-10 nmol/mgprot |
| Detection Method | Colorimetric method |
| Assay type | Quantitative |
| Assay time | 240 min |
| Precision | Average inter-assay CV: 8.600% | Average intra-assay CV: 4.500% |
| Other instruments required | Vortex mixer, Micropipettor, Water bath, Incubator, Centrifuge |
| Other reagents required |
Absolute ethanol, Ethyl acetate |
| Storage | 2-8℃ |
| Valid period | 12 months |
Dilution of Sample
It is recommended to take 2~3 samples with expected large difference to do pre-experiment before formal experiment. The sample can be detected by this kit when the protein content of samples is ranged from 1-10 mg/mL.
The recommended dilution factor for different samples is as follows (for reference only):
| Sample type | Dilution factor |
| Human serum | 8-10 |
| Mouse serum | 8-10 |
| 10% Rat liver tissue homogenization | 2-3 |
| 10% Mouse heart tissue homogenization | 1 |
| 10% Mouse brain tissue homogenization | 1 |
Note: The diluent is double distilled water or reagent 1.
Detection Principle
The content of protein carbonyl increased after oxidation, and the carbonyl group reacted with 2, 4-dinitrophenylhydrazine to form a reddish brown precipitate. The absorbance can be measured at 370 nm after the precipitation is dissolved. The carbonyl content can be calculated indirectly.
![]()
Kit Components & Storage
| Item | Component |
Size 1 (50 Assays) |
Size 2 (100 Assays) |
Storage |
| Reagent 1 | Homogenate Medium | 50 mL ×1 vial | 50 mL × 2 vials | 2-8°C, 12 months |
| Reagent 2 | Sulfates | Powder ×1 vial | Powder ×2 vials | 2-8°C, 12 months, shading light |
| Reagent 3 | DNPH Solution | 10 mL ×1 vial | 20 mL ×1 vial | 2-8°C, 12 months, shading light |
| Reagent 4 | Acid Reagent | 10 mL ×1 vial | 20 mL ×1 vial | 2-8°C, 12 months |
| Reagent 5 | Protein Precipitator | 30 mL ×1 vial | 60 mL ×1 vial | 2-8°C, 12 months |
| Reagent 6 | Denaturant | 37.5 mL ×2 vials | 50 mL ×3 vials | 2-8°C, 12 months |
Note: The reagents must be stored strictly according to the preservation conditions in the above table. The reagents in different kits cannot be mixed with each other. For a small volume of reagents, please centrifuge before use, so as not to obtain sufficient amount of reagents.
Technical Data:
Parameter:
Intra-assay Precision
Three human serum samples were assayed in replicates of 20 to determine precision within an assay (CV = Coefficient of Variation).
| Parameters | Sample 1 | Sample 2 | Sample 3 |
| Mean (nmol/mgprot) | 1.50 | 3.80 | 7.90 |
| %CV | 4.8 | 4.3 | 4.4 |
Inter-assay Precision
Three human serum samples were assayed 20 times in duplicate by three operators to determine precision between assays.
| Parameters | Sample 1 | Sample 2 | Sample 3 |
| Mean (nmol/mgprot) | 1.50 | 3.80 | 7.90 |
| %CV | 8.4 | 8.5 | 8.9 |
Recovery
Take three samples of high concentration, middle concentration and low concentration to test the samples of each concentration for 6 times parallelly to get the average recovery rate of 100%.
| Standard 1 | Standard 2 | Standard 3 | |
| Expected Conc. (nmol/mgprot) | 2.4 | 5.2 | 8.5 |
| Observed Conc. (nmol/mgprot) | 2.4 | 5.4 | 8.6 |
| Recovery rate (%) | 99 | 103 | 101 |
Sensitivity
The analytical sensitivity of the assay is 0.02 nmol/mgprot. This was determined by adding two standard deviations to the mean O.D. obtained when the zero standard was assayed 20 times, and calculating the corresponding concentration.