{"title":"Dry Pellet Pressing Die Sets","description":"","products":[{"product_id":"mse-pro-6-35x6-35-mm-0-25x0-25-square-dry-pellet-pressing-die-set","title":"MSE PRO 6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 6.35x6.35 mm (0.25x0.25\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0110\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force: \u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 2 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e6.35x6.35 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x93\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.65kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31811380576314,"sku":"PR0110","price":527.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/975_MSE_PRO_6_35x6_35_mm_0_25x0_25_Square_Dry_Pellet_Pressing_Die_Set_803a3606cc.jpg?v=1777693437"},{"product_id":"mse-pro-12-7x12-7-mm-0-5x0-5-square-dry-pellet-pressing-die-set","title":"MSE PRO 12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 12.7x12.7 mm (0.5x0.5\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0111\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressings Force: \u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 10 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e12.7x12.7mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e30mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.2kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31813534875706,"sku":"PR0111","price":655.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/976_MSE_PRO_12_7x12_7_mm_0_5x0_5_Square_Dry_Pellet_Pressing_Die_Set_38b950731f.jpg?v=1777693465"},{"product_id":"mse-pro-25-4x25-4-mm-1x1-square-dry-pellet-pressing-die-set","title":"MSE PRO 25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 25.4x25.4 mm (1x1\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0112\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 30 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e25.4x25.4mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e45mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ73x133mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e2.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31813618237498,"sku":"PR0112","price":875.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/977_MSE_PRO_25_4x25_4_mm_1x1_Square_Dry_Pellet_Pressing_Die_Set_9731995ce8.jpg?v=1777693492"},{"product_id":"mse-pro-50x50-mm-2x2-square-dry-pellet-pressing-die-set","title":"MSE PRO 50x50 mm (2x2\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e50x50 mm (2x2\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 50x50 mm (2x2\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e50x50 mm (2x2\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0113\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 25 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e50x50mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e56mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ98x150mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e7.3kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"368\" width=\"405\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31814014500922,"sku":"PR0113","price":1293.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/978_MSE_PRO_50x50_mm_2x2_Square_Dry_Pellet_Pressing_Die_Set_afdfce913c.jpg?v=1777693519"},{"product_id":"mse-pro-6-mm-diameter-sphere-dry-pellet-pressing-die-set","title":"MSE PRO 6 mm Diameter Sphere Dry Pellet Pressing Die Set","description":"\u003ch3\u003e6 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 6mm (~0.25\") diameter sphere dry pellet pressing die set uses pressure to compress powder into 6 mm spherical pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for catalyst, gas absorption, battery, minerals, ceramic, or pharmaceutical industries. Spherical structure is found to be beneficial for catalysis, gas absorption, power density and drug release compared with other structures.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eDue to its small diameter, the pressed sample will have a small part showing non-spherical shape in-between two hemispheres. This part will become non-phenomenal when the diameter increases. Please check the sample images before ordering.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e6 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0115\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 1 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ6 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/sphere_die_01_480x480.png?v=1594938331\" alt=\"\" width=\"384\" height=\"412\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200720202658_480x480.jpg?v=1595302244\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200716154909_480x480.jpg?v=1594939846\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31816573911098,"sku":"PR0115","price":710.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/980_MSE_PRO_6_mm_Diameter_Sphere_Dry_Pellet_Pressing_Die_Set_a4af040b0d.jpg?v=1777693574"},{"product_id":"mse-pro-12-mm-diameter-sphere-dry-pellet-pressing-die-set","title":"MSE PRO 12 mm Diameter Sphere Dry Pellet Pressing Die Set","description":"\u003ch3\u003e12 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 12 mm (~0.5\") diameter sphere dry pellet pressing die set uses pressure to compress powder into 12 mm spherical pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for catalyst, gas absorption, battery, minerals, ceramic, or pharmaceutical industries. Spherical structure is found to be beneficial for catalysis, gas absorption, power density and drug release compared with other structures.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eDue to its small diameter, the pressed sample will have a small part showing non-spherical shape in-between two hemispheres. This part will become non-phenomenal when the diameter increases. Please check the sample images before ordering.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e12 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0116\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 7 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ12 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/sphere_die_01_480x480.png?v=1594938331\" alt=\"\" width=\"384\" height=\"412\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200720202658_480x480.jpg?v=1595302244\" alt=\"\" width=\"417\" height=\"556\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200716154909_480x480.jpg?v=1594939846\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31816663892026,"sku":"PR0116","price":732.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/981_MSE_PRO_12_mm_Diameter_Sphere_Dry_Pellet_Pressing_Die_Set_9b6d33e96e.jpg?v=1777693602"},{"product_id":"mse-pro-10x10-mm-square-dry-pellet-pressing-die-set","title":"MSE PRO 10x10 mm Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e10x10 mm Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 10X10 mm square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe offer customization service on pressing die set. Please contact us at sales@msesupplies.com to discuss.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e10x10 mm Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0127\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 6 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e10x10 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x93\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.65kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"368\" width=\"405\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31883118182458,"sku":"PR0127","price":593.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1024_MSE_PRO_10x10_mm_Square_Dry_Pellet_Pressing_Die_Set_61153b531b.jpg?v=1777694731"},{"product_id":"mse-pro-20-mm-diameter-sphere-dry-pellet-pressing-die-set","title":"MSE PRO 20 mm Diameter Sphere Dry Pellet Pressing Die Set","description":"\u003ch3\u003eMSE PRO™ 20 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 20 mm diameter sphere dry pellet pressing die set uses pressure to compress powder into 20 mm spherical pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for catalyst, gas absorption, battery, minerals, ceramic, or pharmaceutical industries. Spherical structure is found to be beneficial for catalysis, gas absorption, power density and drug release compared with other structures.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eDue to its small diameter, the pressed sample will have a small part showing non-spherical shape in-between two hemispheres. This part will become non-phenomenal when the diameter increases. Please check the sample images before ordering.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e20 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0239\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003eMaximum 10 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ20 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSuggested pressing force: 1\/3 of Max. Force.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"412\" width=\"384\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/sphere_die_01_480x480.png?v=1594938331\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"556\" width=\"417\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200720202658_480x480.jpg?v=1595302244\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200716154909_480x480.jpg?v=1594939846\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40469029879866,"sku":"PR0239","price":842.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChatImage_20200713151017_42f17bc8-d63e-4392-a5d9-a51093f327ed.jpg?v=1715803680"},{"product_id":"mse-pro-100x100-mm-square-dry-pellet-pressing-die-set-with-splice-structure","title":"MSE PRO 100x100 mm Square Dry Pellet Pressing Die Set with Splice Structure","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 100x100 mm Square Dry Pellet Pressing Die Set with Splice Structure\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 100x100 mm square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSquare Pressing Die Sets play a crucial role in mass production, allowing for efficient and uniform shaping of metal components. They are particularly valuable when producing square-shaped parts, holes, or indentations in metal sheets or plates, often used in industries such as automotive manufacturing, aerospace, electronics and construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e offers both rectangular and square shape pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"width: 89.8182%; height: 183px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eSKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1026\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eSample width\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003e100 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003eAlloy tool steel: Cr12MoV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003eHRC60-HRC62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eCavity depth (N)\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eAverage dimensions (L×H)\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003e160×110 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.0809%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50.5515%; height: 19.5938px;\"\u003e21 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003eNote:\u003cbr\u003eFor the sample length size more than 80 mm, we suggest design it with Splice structure to add the max. limited pressure it can bear.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_c2ca5a03-078f-44b7-a3c6-87ce5aba8aa0.png?v=1719892958\" width=\"229\" height=\"83\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_f537fb99-e879-478f-98ee-bb4f6231fe91.png?v=1719893079\" width=\"174\" height=\"112\"\u003e\u003cimg height=\"149\" width=\"274\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/13_089e498b-ad5e-4391-abad-6e6922e4f8e0.png?v=1719893111\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40538836271162,"sku":"PR1026","price":2357.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/100x100.png?v=1719970563"},{"product_id":"mse-pro-30mm-polygon-shape-pressing-die-set","title":"MSE PRO 30mm Polygon Shape Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 30mm Polygon Shape Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e30mm Polygon Shape Pressing Die Sets are \u003cspan\u003especialized tools used in manufacturing processes, particularly in metalworking and sheet metal fabrication. They can produce \u003cstrong\u003epellets or components\u003c\/strong\u003e with various polygonal shapes, including triangles, pentagons, hexagons, and other multi-sided figures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePolygon Shape Pressing Die Sets play a crucial role in mass production, allowing for efficient and uniform shaping of metal components. They are often used for specialized components or research purposes where specific geometries are required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious polygonal shapes\u003c\/span\u003e pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1028\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003eAlloy tool steel: Cr12MoV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003eHRC60-HRC62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth (N)\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions (L×H)\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e30×130 mm (L×H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e2.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: Other pressing die sets for special shape sample, we can also design it according to your need.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"106\" width=\"140\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_4a7f0959-a5c4-456b-8bdb-41afae4006a5.png?v=1719910168\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrawing sketch：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/t.png?v=1720404401\" width=\"198\" height=\"183\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"161\" width=\"160\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_7c0e5399-2484-43a1-b12b-761a371997a0.png?v=1719910331\" alt=\"\"\u003e\u003cimg height=\"152\" width=\"246\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_45206757-2044-45a5-9651-92c6e6cf4ad8.png?v=1719910388\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40538845544506,"sku":"PR1028","price":780.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/5_caac6417-6451-4094-9f6a-a1fbd241e9a4.png?v=1719910095"},{"product_id":"mse-pro-200x200-mm-square-dry-pellet-pressing-die-set-with-splice-structure","title":"MSE PRO 200x200 mm Square Dry Pellet Pressing Die Set With Splice Structure","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 200x200 mm Square Dry Pellet Pressing Die Set With Splice Structure\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 200x200 mm square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSquare Pressing Die Sets play a crucial role in mass production, allowing for efficient and uniform shaping of metal components. They are particularly valuable when producing square-shaped parts, holes, or indentations in metal sheets or plates, often used in industries such as automotive manufacturing, aerospace, electronics and construction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers both rectangular and square shape pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 156.75px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eSKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1027\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eSample width\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003eAlloy tool steel: Cr12MoV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003eHRC60-HRC62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eCavity depth (N)\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003e65 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eAverage dimensions (L×H)\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003e260×120 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.109%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50.5234%; height: 19.5938px;\"\u003e44 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003eNote:\u003cbr\u003eFor the sample length size more than 80 mm, we suggest design it with Splice structure to add the max. limited pressure it can bear.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_c2ca5a03-078f-44b7-a3c6-87ce5aba8aa0.png?v=1719892958\" width=\"229\" height=\"83\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_f537fb99-e879-478f-98ee-bb4f6231fe91.png?v=1719893079\" width=\"174\" height=\"112\"\u003e\u003cimg height=\"149\" width=\"274\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/13_089e498b-ad5e-4391-abad-6e6922e4f8e0.png?v=1719893111\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40539400175674,"sku":"PR1027","price":3530.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/100x100.png?v=1719970563"},{"product_id":"mse-pro-50mm-polygon-shape-pressing-die-set","title":"MSE PRO 50mm Polygon Shape Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 50mm Polygon Shape Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e50mm Polygon Shape Pressing Die Sets are \u003cspan\u003especialized tools used in manufacturing processes, particularly in metalworking and sheet metal fabrication. They can produce \u003cstrong\u003epellets or components\u003c\/strong\u003e with various polygonal shapes, including triangles, pentagons, hexagons, and other multi-sided figures.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePolygon Shape Pressing Die Sets play a crucial role in mass production, allowing for efficient and uniform shaping of metal components. They are often used for specialized components or research purposes where specific geometries are required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious polygonal shapes\u003c\/span\u003e pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1029\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003eAlloy tool steel: Cr12MoV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003eHRC60-HRC62\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth (N)\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions (L×H)\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e50×130 mm (L×H)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e6.5 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: Other pressing die sets for special shape sample, we can also design it according to your need.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"106\" width=\"140\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_4a7f0959-a5c4-456b-8bdb-41afae4006a5.png?v=1719910168\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDrawing sketch：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"166\" width=\"174\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/241615910bee55f3af73e6052c7b22cc.png?v=1720403591\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg height=\"161\" width=\"160\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_7c0e5399-2484-43a1-b12b-761a371997a0.png?v=1719910331\" alt=\"\"\u003e\u003cimg height=\"152\" width=\"246\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_45206757-2044-45a5-9651-92c6e6cf4ad8.png?v=1719910388\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40539475312698,"sku":"PR1029","price":1132.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/5_caac6417-6451-4094-9f6a-a1fbd241e9a4.png?v=1719910095"},{"product_id":"mse-pro-50-mm-diameter-porous-pressing-die-set","title":"MSE PRO 50 mm Diameter Porous Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 50 mm Diameter Porous Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e50 mm Diameter\u003cstrong\u003e \u003c\/strong\u003ePorous Pressing Die Sets are \u003cspan\u003e specialized tools used in materials science and engineering for creating porous pellets or samples from powdered materials. These die sets are designed to allow the formation of interconnected pores within the pressed sample, which is crucial for various applications in catalysis, gas absorption, battery research, and other fields requiring high surface area materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious polygonal shapes\u003c\/span\u003e pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1034\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eHRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 53.629%;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ50\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e55 \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003emm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ88×150 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e5.1 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: We can design the die sets' size and number of holes according to your needs。\u003cimg\u003e\u003cstrong\u003e\u003cimg\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40558898446394,"sku":"PR1034","price":868.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_72c50928-aba2-42cd-b7bc-4575fba51546.png?v=1740487438"},{"product_id":"mse-pro-90-mm-diameter-porous-pressing-die-set","title":"MSE PRO 90 mm Diameter Porous Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 90 mm Diameter Porous Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e90 mm Diameter\u003cstrong\u003e \u003c\/strong\u003ePorous Pressing Die Sets are \u003cspan\u003e specialized tools used in materials science and engineering for creating porous pellets or samples from powdered materials. These die sets are designed to allow the formation of interconnected pores within the pressed sample, which is crucial for various applications in catalysis, gas absorption, battery research, and other fields requiring high surface area materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious polygonal shapes\u003c\/span\u003e pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1035\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eHRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 53.629%;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ90\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e65 \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003emm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ128×180 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e14 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: We can design the die sets' size and number of holes according to your needs。\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40558935310394,"sku":"PR1035","price":1110.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_c6c678bb-8863-4018-bbde-9a0a0f1ba0cb.png?v=1740487482"},{"product_id":"mse-pro-120-mm-diameter-porous-pressing-die-set","title":"MSE PRO 120 mm Diameter Porous Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 120 mm Diameter Porous Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e120 mm Diameter\u003cstrong\u003e \u003c\/strong\u003ePorous Pressing Die Sets are \u003cspan\u003e specialized tools used in materials science and engineering for creating porous pellets or samples from powdered materials. These die sets are designed to allow the formation of interconnected pores within the pressed sample, which is crucial for various applications in catalysis, gas absorption, battery research, and other fields requiring high surface area materials.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious polygonal shapes\u003c\/span\u003e pressing die set. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" style=\"font-size: 0.875rem;\" rel=\"noopener\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 137.157px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1036\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eHRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 53.629%;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ120\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e65 \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003emm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ168×180 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e30 Kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: We can design the die sets' size and number of holes according to your needs。\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40558936784954,"sku":"PR1036","price":3068.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_363d8335-bf1d-4d10-904f-48c8d188f6cd.png?v=1740487505"},{"product_id":"mse-pro-3x3-mm-square-dry-pellet-pressing-die-set","title":"MSE PRO 3x3 mm Square Dry Pellet Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 3x3 mm Square Dry Pellet Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e3x3 mm Square Dry Pellet Pressing Die Set\u003cspan\u003es ues pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious square pellet pressing die set\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 137.157px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1044\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 53.629%;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e3×3 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e20 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ43×93 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e0.65 kg\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"109\" width=\"140\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_8da33e08-8a95-44b5-b62f-5c7246184626.png?v=1722498360\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"159\" width=\"151\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_71cc9861-c40d-461c-9473-2611d14efe4a.png?v=1722498360\" alt=\"\"\u003e\u003cimg height=\"136\" width=\"227\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_ed27a0a3-6b1a-49ab-8d87-37791a04c2c5.png?v=1722498361\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40566928277562,"sku":"PR1044","price":582.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_892851ec-4d7e-47df-b68b-c76e5ed4afaf.jpg?v=1722496767"},{"product_id":"mse-pro-10x8-mm-rectangle-dry-pellet-pressing-die-set-2","title":"MSE PRO 10×8 mm Rectangle Dry Pellet Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 10×8 mm Rectangle Dry Pellet Pressing Die Set\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e10x8 mm Square Dry Pellet Pressing Die Set\u003cspan\u003es ues pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious square pellet pressing die set\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\"\u003e\u003cstrong\u003e\u003cspan\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 137.157px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1045\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 53.629%;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e10×8 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e20 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ43×93 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 53.629%; height: 19.5938px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 46.0033%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e0.65 kg\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eNote: \u003cspan\u003eWe can also offer larger size pellet pressing die sets for 200mm max. diameter pellet sample according to your need.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/5_6ca24017-ec8d-4e23-9848-a0bfbb5bd776.png?v=1722499198\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_71cc9861-c40d-461c-9473-2611d14efe4a.png?v=1722498360\" width=\"151\" height=\"159\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_ed27a0a3-6b1a-49ab-8d87-37791a04c2c5.png?v=1722498361\" width=\"227\" height=\"136\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40566959636538,"sku":"PR1045","price":582.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_892851ec-4d7e-47df-b68b-c76e5ed4afaf.jpg?v=1722496767"},{"product_id":"mse-pro-60x60-mm-square-dry-pellet-pressing-die-set","title":"MSE PRO 60×60 mm Square Dry Pellet Pressing Die Set","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 60×60 mm Square Dry Pellet Pressing Die Set \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e60x60 mm Square Dry Pellet Pressing Die Set\u003cspan\u003es ues pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious square dry pellet pressing die set\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" style=\"font-size: 0.875rem;\" rel=\"noopener\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 151.75px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1046\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e60×60 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e60 \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003emm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ118×180 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1875px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 34.1875px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 34.1875px;\"\u003e\n\u003cdiv\u003e\n\u003cspan\u003e11.4 k\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eg\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_8da33e08-8a95-44b5-b62f-5c7246184626.png?v=1722498360\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_71cc9861-c40d-461c-9473-2611d14efe4a.png?v=1722498360\" width=\"151\" height=\"159\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_ed27a0a3-6b1a-49ab-8d87-37791a04c2c5.png?v=1722498361\" width=\"227\" height=\"136\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40566986899514,"sku":"PR1046","price":1891.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_15031b22-453f-4074-908e-5ca4575f554b.jpg?v=1722500293"},{"product_id":"mse-pro-0-3-8-mm-diameter-dry-pellet-pressing-die-set-for-spherical-shaped-sample","title":"MSE PRO 0.3\" (8 mm) Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 0.3\" (8 mm) Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e0.3\" (8 mm)  Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample \u003cspan\u003eare specialized tools used in materials science, pharmaceuticals, and various industries to compress powders into spherical pellets. These die sets are engineered to compress powders into uniform, spherical pellets. The spherical shape is particularly beneficial for applications in catalysis, gas absorption, and drug release, offering advantages over other geometries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious split type dry pellet pressing die sets\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\" target=\"_blank\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 151.75px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1056\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ0.3\" (8 mm) \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e40 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ53×120 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1875px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 34.1875px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 34.1875px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e1.4 k\u003cspan style=\"font-size: 0.875rem;\"\u003eg\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_00a4c6e2-355a-45a0-97d6-28ad09b758e9.png?v=1722588790\" width=\"126\" height=\"104\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"126\" width=\"124\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_0623dd0c-ba9b-4716-a112-df1360eb5859.png?v=1722588961\" alt=\"\"\u003e\u003cimg height=\"137\" width=\"209\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_1c67b4af-2ca9-44a8-b5f8-6da7c085cdea.png?v=1722588961\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40567982587962,"sku":"PR1056","price":809.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_b2d93856-f960-4e2c-8f91-cde4a011aa95.jpg?v=1722588927"},{"product_id":"mse-pro-0-6-15-mm-diameter-dry-pellet-pressing-die-set-for-spherical-shaped-sample","title":"MSE PRO 0.6\" (15 mm) Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 0.6\" (15 mm) \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e \u003c\/strong\u003e0.6\" (15 mm) \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003cspan\u003eare specialized tools used in materials science, pharmaceuticals, and various industries to compress powders into spherical pellets. These die sets are engineered to compress powders into uniform, spherical pellets. The spherical shape is particularly beneficial for applications in catalysis, gas absorption, and drug release, offering advantages over other geometries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious split type dry pellet pressing die sets\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"width: 100%; height: 151.75px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1057\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ0.6\" (15 mm)\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e40 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ53×120 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1875px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 34.1875px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 34.1875px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e1.4 k\u003cspan style=\"font-size: 0.875rem;\"\u003eg\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"104\" width=\"126\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_00a4c6e2-355a-45a0-97d6-28ad09b758e9.png?v=1722588790\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3_0623dd0c-ba9b-4716-a112-df1360eb5859.png?v=1722588961\" width=\"124\" height=\"126\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_1c67b4af-2ca9-44a8-b5f8-6da7c085cdea.png?v=1722588961\" width=\"209\" height=\"137\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40570318389306,"sku":"PR1057","price":839.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_b2d93856-f960-4e2c-8f91-cde4a011aa95.jpg?v=1722588927"},{"product_id":"mse-pro-30-mm-diameter-dry-pellet-pressing-die-set-for-spherical-shaped-sample","title":"MSE PRO 30 mm Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 30 mm \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 30 mm \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003cspan\u003eare specialized tools used in materials science, pharmaceuticals, and various industries to compress powders into spherical pellets. These die sets are engineered to compress powders into uniform, spherical pellets. The spherical shape is particularly beneficial for applications in catalysis, gas absorption, and drug release, offering advantages over other geometries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" data-mce-href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious split type dry pellet pressing die sets\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 151.75px;\" width=\"100%\" data-mce-style=\"width: 100%; height: 151.75px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1058\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ30 mm \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e60 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\" data-mce-style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\" data-mce-style=\"width: 49.6324%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\" data-mce-style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ88×150 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1875px;\" data-mce-style=\"height: 34.1875px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 34.1875px;\" data-mce-style=\"width: 49.6324%; height: 34.1875px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 34.1875px;\" data-mce-style=\"width: 50%; height: 34.1875px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e5.8 k\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eg\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_00a4c6e2-355a-45a0-97d6-28ad09b758e9.png?v=1722588790\" width=\"126\" height=\"104\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_00a4c6e2-355a-45a0-97d6-28ad09b758e9.png?v=1722588790\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"137\" width=\"209\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_1c67b4af-2ca9-44a8-b5f8-6da7c085cdea.png?v=1722588961\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_1c67b4af-2ca9-44a8-b5f8-6da7c085cdea.png?v=1722588961\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40570321436730,"sku":"PR1058","price":949.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_7f899eeb-9861-4ec6-8428-f7869b4804a4.jpg?v=1722839664"},{"product_id":"mse-pro-2-50-mm-diameter-dry-pellet-pressing-die-set-for-spherical-shaped-sample","title":"MSE PRO 2\" (50 mm) Diameter Dry Pellet Pressing Die Set for Spherical Shaped Sample","description":"\u003ch2\u003e\u003cstrong\u003eMSE PRO™ 2\" (50 mm) \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe 2\" (50 mm) \u003cspan\u003eDiameter \u003c\/span\u003eDry Pellet Pressing Die Set for Spherical Shaped Sample \u003cspan\u003eare specialized tools used in materials science, pharmaceuticals, and various industries to compress powders into spherical pellets. These die sets are engineered to compress powders into uniform, spherical pellets. The spherical shape is particularly beneficial for applications in catalysis, gas absorption, and drug release, offering advantages over other geometries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMSE Supplies\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e offers \u003cspan\u003evarious split type dry pellet pressing die sets\u003c\/span\u003e. Customization is available upon request. Please \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003econtact us\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e for more information.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c!----\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c!----\u003e\u003c\/p\u003e\n\u003ctable style=\"width: 100%; height: 151.75px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e SKU#\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\u003cstrong\u003ePR1059\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDie material\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003e440C Stainless Steel\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eIndenter hardness\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eRC60-HRC62\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\u003cspan\u003eReference sample size\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cspan\u003eΦ\u003c\/span\u003e2\" (50 mm)\u003cspan\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eCavity depth \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e60 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 19.5938px;\"\u003eDimensions \u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 19.5938px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003eΦ88×150 mm\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cspan\u003e\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 34.1875px;\"\u003e\n\u003ctd style=\"width: 49.6324%; height: 34.1875px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"width: 50%; height: 34.1875px;\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e5.8 k\u003cspan style=\"font-size: 0.875rem;\"\u003eg\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eSample shape：\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/2_00a4c6e2-355a-45a0-97d6-28ad09b758e9.png?v=1722588790\" width=\"126\" height=\"104\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDiagram of press die:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"137\" width=\"209\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/4_1c67b4af-2ca9-44a8-b5f8-6da7c085cdea.png?v=1722588961\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion                                          \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c!----\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40570508705850,"sku":"PR1059","price":1033.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1_7f899eeb-9861-4ec6-8428-f7869b4804a4.jpg?v=1722839664"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/collections\/Dry_Pellet_Pressing_Die_Sets_160x160_2a50a799-0f12-464f-b956-3f52d03eb6b2.webp?v=1769048852","url":"https:\/\/www.msesupplies.com\/en-de\/collections\/dry-pellet-pressing-die-sets\/mse-pro-pellet-pressing-dies-and-press.oembed","provider":"MSE Supplies","version":"1.0","type":"link"}