{"title":"Cylindrical Shaped Dry Pellet Pressing Die Sets","description":"","products":[{"product_id":"mse-pro-0-25-6-35-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.25\" (6.35 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.25\" (6.35 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.25\" diameter dry pellet pressing die set uses pressure to compress powder into 0.25\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with particle size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0101 \u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.25\" (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 20 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 2 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31230709366842,"sku":"PR0101","price":307.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/724_MSE_PRO_0_25_6_35_mm_Diameter_Dry_Pellet_Pressing_Die_Set_f33bb2b497.jpg?v=1777616926"},{"product_id":"mse-pro-0-4-10-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.4\" (10 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.4\" diameter dry pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\u003cstrong\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0102\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231021547578,"sku":"PR0102","price":313.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/725_MSE_PRO_0_4_10_mm_Diameter_Dry_Pellet_Pressing_Die_Set_ad37ebc033.jpg?v=1777616940"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.5\" (12.7 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.5\" diameter dry pellet pressing die set uses pressure to compress powder into 0.5\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" data-mce-href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend using this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0103\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 12.7 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: 3Cr13 and 440C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231026430010,"sku":"PR0103","price":355.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/726_MSE_PRO_0_5_12_7_mm_Diameter_Dry_Pellet_Pressing_Die_Set_db1f2f306e.jpg?v=1777616954"},{"product_id":"mse-pro-1-0-25-4-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 1.0\" (25.4 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e1.0\" (25.4 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 1.0\" diameter dry pellet pressing die set uses pressure to compress powder into 1.0\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0104\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 1 inch (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231029805114,"sku":"PR0104","price":478.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/727_MSE_PRO_1_0_25_4_mm_Diameter_Dry_Pellet_Pressing_Die_Set_1aca4b66a1.jpg?v=1777616968"},{"product_id":"mse-pro-2-0-50-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 2.0\" (50 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e2.0\" (50 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 2.0\" diameter dry pellet pressing die set uses pressure to compress powder into 2.0\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0105\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, and 1 Release Ring\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 50 mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 55 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 100 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cspan data-mce-fragment=\"1\"\u003estainless steel: 440C and 3Cr13\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/50mm_2_inch_powder_pressing_die_480x480.jpg?v=1597335652\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231032033338,"sku":"PR0105","price":655.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/728_MSE_PRO_2_0_50_mm_Diameter_Dry_Pellet_Pressing_Die_Set_5ef6590bef.jpg?v=1777616981"},{"product_id":"mse-pro-undoped-yttrium-aluminum-garnet-y-sub-3-sub-al-sub-5-sub-o-sub-12-sub-yag-single-crystal-substrates","title":"MSE PRO Undoped Yttrium Aluminum Garnet (Y\u003csub\u003e3\u003c\/sub\u003eAl\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e, YAG) Single Crystal Substrates","description":"\u003cp\u003eUndoped YAG is a substrate and window material for both IR and UV optics.  Undoped YAG is highly transmissive in the IR region where glasses tend to absorb.  YAG is much easier to polish to optical specifications but retains the chemical robustness near that of Sapphire.  YAG is a non-birefringent material. \u003c\/p\u003e\n\u003ctable style=\"width: 533px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"width: 517px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eMain Parameters of undoped YAG single crystal substrates\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eUndoped-Yttrium Aluminum Garnet, Y\u003csub\u003e3\u003c\/sub\u003eAl\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eCrystal structure\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eCubic, Ia-3d (m3m)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eUnit cell constant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003ea = 10.503 A\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eMelt point (ºC)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1940\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eDensity (g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e4.56\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e8.5 Mohs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThermal expansion (x 10\u003csup\u003e-6\u003c\/sup\u003e K\u003csup\u003e-1\u003c\/sup\u003e )\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e8.2 (100), 7.7 (110), 7.8 (111)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThermal Conductivity (W m\u003csup\u003e-1\u003c\/sup\u003e K\u003csup\u003e-1\u003c\/sup\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eRefractive Index @1.064 µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1.8152\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eDielectric Constant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e11.7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSizes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e5x5, 10x5, 10x10, 25.4x25.4, 50.8x50.8 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1 inch diameter, 2 inch diameter, other sizes are available upon request\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThickness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e0.5 mm or 1.0 mm or customized\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSurface polishing\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eSingle or double side polished (epi-ready CMP)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eCrystal orientation\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e(100), (110), (111), +\/- 0.5 degree\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSurface roughness, Ra:\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e\u0026lt; 0.5 nm (5 um x 5 um area)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003ePackage\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003esealed in class 100 clean bags packed in class 1000 clean room\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aip.scitation.org\/doi\/10.1063\/1.3671646\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eC.R. Varney, S.M. Reda, D.T. Mackay, M.C. Rowe, and F.A. Selim. Strong visible and near infrared luminescence in undoped YAG single crystals AIP Advances 1, 042170 (2011)\u003c\/a\u003e\u003ca href=\"https:\/\/aip.scitation.org\/doi\/10.1063\/1.3671646\"\u003e; \u003c\/a\u003ehttps:\/\/doi.org\/10.1063\/1.3671646\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0030401812005196\"\u003eR\u003c\/a\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0030401812005196\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e.W. Stites and K.M. Ohara The Verdet constant of undoped Y\u003csub\u003e3\u003c\/sub\u003eAL\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e in the near infrared. Optics Comm. Vol 285(20), 2012, Pg. 3997-4000.\u003c\/a\u003e https:\/\/doi.org\/10.1016\/j.optcom.2012.06.008\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0022-3727\/45\/1\/015103\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eC.R. Varney, S.M. Reda, D.T. Mackay, M.C. Rowe, and F.A. Selim. On the Optical Properties of Undoped and Rare-Earth-Doped Yttrium Aluminum Garnet Single Crystals Journal of Physics D Applied Physics 45(1), 2012\u003c\/a\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148310074,"sku":"SU3001","price":153.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148342842,"sku":"SU3002","price":175.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Single Side Polished (SSP)","offer_id":40204148375610,"sku":"SU3003","price":164.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Double Side Polished (DSP)","offer_id":40204148408378,"sku":"SU3004","price":175.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148441146,"sku":"SU3005","price":820.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148473914,"sku":"SU3006","price":864.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148506682,"sku":"SU3007","price":127.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148539450,"sku":"SU3008","price":149.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148572218,"sku":"SU3009","price":127.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148604986,"sku":"SU3010","price":149.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 2 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148637754,"sku":"SU3011","price":699.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 2 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148670522,"sku":"SU3012","price":743.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/838_MSE_PRO_Undoped_Yttrium_Aluminum_Garnet_Y_sub_3_sub_Al_sub_5_sub_O_sub_12_sub_YA_01c32824b7.jpg?v=1777649093"},{"product_id":"mse-pro-15-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 15 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e15 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 15 mm diameter dry pellet pressing die set uses pressure to compress powder into 15 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0121\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 15 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 14 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868459450426,"sku":"PR0121","price":380.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1010_MSE_PRO_15_mm_Diameter_Dry_Pellet_Pressing_Die_Set_f95d0dcf97.jpg?v=1777694324"},{"product_id":"mse-pro-20-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 20 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e20 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 20 mm diameter dry pellet pressing die set uses pressure to compress powder into 20 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb style=\"color: #ff2a00;\"\u003eWe don't \u003c\/b\u003e\u003cspan color=\"#ff2a00\" style=\"color: #ff2a00;\"\u003e\u003cb\u003erecommend\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #ff2a00;\"\u003e to use this pressing die set to press\u003cstrong data-mce-fragment=\"1\"\u003e hard powder with size\u003c\/strong\u003e of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0122\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 20 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 25 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868487467066,"sku":"PR0122","price":425.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1011_MSE_PRO_20_mm_Diameter_Dry_Pellet_Pressing_Die_Set_b9d3730198.jpg?v=1777694352"},{"product_id":"mse-pro-30-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 30 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e30 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm diameter dry pellet pressing die set uses pressure to compress powder into 30 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0123\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 30 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 56 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868490448954,"sku":"PR0123","price":527.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1012_MSE_PRO_30_mm_Diameter_Dry_Pellet_Pressing_Die_Set_ae15bc997a.jpg?v=1777694381"},{"product_id":"mse-pro-40-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 40 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e40 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 40 mm diameter dry pellet pressing die set uses pressure to compress powder into 40 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0124\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 40 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 100 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868538388538,"sku":"PR0124","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1013_MSE_PRO_40_mm_Diameter_Dry_Pellet_Pressing_Die_Set_233d209998.jpg?v=1777694412"},{"product_id":"mse-pro-18-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 18 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e18 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 18 mm diameter dry pellet pressing die set uses pressure to compress powder into 18 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for infrared spectroscopy measurement, coin cell electrode preparation and catalyst research. Additional uses for laboratory pellets can be found in the minerals, ceramic or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0128\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 18 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 20 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31905840955450,"sku":"PR0128","price":424.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1044_MSE_PRO_18_mm_Diameter_Dry_Pellet_Pressing_Die_Set_6c856aa053.jpg?v=1777695273"},{"product_id":"mse-pro-3mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 3mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e3mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 3mm diameter dry pellet pressing die set uses pressure to compress powder into 3mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0134 \u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 3mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 20 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 0.5 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32081846370362,"sku":"PR0134","price":373.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1200_MSE_PRO_3mm_Diameter_Dry_Pellet_Pressing_Die_Set_d6ea9d3a34.jpg?v=1777699433"},{"product_id":"mse-pro-12-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 12 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eMSE PRO™ \u003c\/span\u003e12 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 12mm diameter dry pellet pressing die set uses pressure to compress powder into 12mm pellets. The pellets are ideally sized for use in MSE Supplies \u003cstrong\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/peek-split-cell-test-kit-for-solid-state-lithium-battery-research?variant=31376699326522\" target=\"_blank\"\u003ePEEK Split Cell Test Kit for Solid State Lithium Battery Research\u003c\/a\u003e\u003c\/strong\u003e, \u003cstrong\u003ePlease note we do not guarantee it to work for test cells from other companies.\u003c\/strong\u003e The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. Uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical, and Lithium ion battery industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cstyle type=\"text\/css\"\u003e\u003c!--\ntd {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}\n--\u003e\u003c\/style\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-sheets-userformat='{\"2\":12925,\"3\":{\"1\":0},\"5\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"6\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"7\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"8\":{\"1\":[{\"1\":2,\"2\":0,\"5\":{\"1\":2,\"2\":0}},{\"1\":0,\"2\":0,\"3\":3},{\"1\":1,\"2\":0,\"4\":1}]},\"9\":1,\"12\":0,\"15\":\"Arial\",\"16\":10}' data-sheets-value='{\"1\":2,\"2\":\"PR0172\"}'\u003eProduct#: PR0172\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 12 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 9 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39458688237626,"sku":"PR0172","price":351.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1551_MSE_PRO_12_mm_Diameter_Dry_Pellet_Pressing_Die_Set_13ec2705eb.jpg?v=1777708390"},{"product_id":"mse-pro-25mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 25mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e25mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 25mm diameter dry pellet pressing die set uses pressure to compress powder into 25mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 25mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40952670584890,"sku":"PR0240","price":525.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/products\/pr0104_dbad85eb-4ee8-48fe-8ed3-5c21522bcb0e.jpg?v=1752253659"},{"product_id":"mse-pro-5mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 5mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e\n\u003cspan data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":4,\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"MSE PRO™ Biological Safety Cabinet (Class II BSC), 1300 Series\"}'\u003eMSE PRO™ \u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e5mm Diameter Dry Pellet Pressing Die Set\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe 5mm diameter dry pellet pressing die set uses pressure to compress powder into 5mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR1081\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 5mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 20 mm\u003c\/li\u003e\n\u003cli\u003eDimension: Dia 43 x 78mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 1.5 metric Ton\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":40988975038522,"sku":"PR1081","price":369.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/PR0181.jpg?v=1756317952"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/collections\/Cylindrical_Shaped_160x160_657ee9ad-1c96-41be-b99b-a5fe4b4ffd62.webp?v=1769048825","url":"https:\/\/www.msesupplies.com\/en-de\/collections\/cylindrical-shaped-dry-pellet-pressing-die-sets.oembed","provider":"MSE Supplies","version":"1.0","type":"link"}