{"title":"Pellet Pressing Dies and Press","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/\"\u003eMSE Supplies\u003c\/a\u003e\u003cspan\u003e is your industry-leading source for all your pellet pressing needs. We offer a vast selection of press die sets and hydraulic pellet presses. We also provide custom solutions for pressing dry powder pellets into various shapes and sizes. Further, we offer both hardened steel and tungsten carbide pellet pressing dies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePellet pressing dies with heating\u003c\/strong\u003e are available from MSE Supplies for the pressing of samples at above room temperatures. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe maximum sizes available for pressing die sets are listed below:\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRegular pressing die (cylindrical shape): 200 mm in diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSquare shape: 200 mm x 200 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSpherical shape: 60 mm diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRing type outside ring diameter: 90 mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSplit type: 100 mm diameter\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\"\u003eA\u003c\/a\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle Sets\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003egate mortar \u0026amp; pestle sets\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e are also available for purchase for grinding and mixing powders before pressing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","products":[{"product_id":"mse-pro-yttria-stabilized-zirconia-ysz-single-crystal-substrates","title":"MSE PRO Yttria Stabilized Zirconia (YSZ) Single Crystal Substrates","description":"\u003cp\u003eYSZ is widely used as an oxide crystal substrate for the epitaxial growth of thin films. Both standard and custom-made products are available from MSE Supplies. Please contact us to request special sizes.\u003c\/p\u003e\n\u003ctable width=\"100%\" cellspacing=\"0\" cellpadding=\"0\" border=\"0\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"style_150\" height=\"28\"\u003e\n\u003ctable style=\"width: 530px;\" height=\"425\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"width: 526.193px;\" valign=\"top\"\u003e\n\u003cdiv\u003e\u003cb\u003eMain Parameters of YSZ crystal substrates\u003c\/b\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003eMaterial\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e8 mol.% \u003cspan\u003eY\u003c\/span\u003e\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003eO\u003c\/span\u003e\u003csub\u003e3\u003c\/sub\u003e\u003cspan\u003e stabilized ZrO\u003c\/span\u003e\u003csub\u003e2\u003c\/sub\u003e, YSZ (yttria-stabilized zirconia), 8YSZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eCrystal structure\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003eFace Centered Cubic (FCC), CaF\u003csub\u003e2\u003c\/sub\u003e type fluorite\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eUnit cell constant\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003ea = 5.125 A\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eMelt point (degree C)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e2500\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eDensity (g\/cm\u003csup\u003e3\u003c\/sup\u003e\u003cspan\u003e)\u003c\/span\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e5.9\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eHardness\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e8 - 8.5 Mohs\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eThermal expansion (\/K)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e10.3 x 10\u003csup\u003e-6\u003c\/sup\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eDielectric constant (@ 1MHz)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e27\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003eTangent loss\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e0.0054\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eGrowth method\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003eSkull melting, cold crucible method\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eSizes\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e5x5, 10x5, 10x10, 25.4x25.4, 50\u003cspan\u003e.8x50.8\u003c\/span\u003e mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e1 inch diameter, 2 inch diameter, 3 inch diameter, other sizes are available upon request\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eThickness\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e0.5 mm or 1.0 mm or customized\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eSurface polishing\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003eSingle or double side polished (epi-ready CMP)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eCrystal orientation\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e(100), (110), (111), +\/- 0.5 degree\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003eSurface roughness, Ra:\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003e\u0026lt; 0.5 nm (5 um x 5 um area)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 195.284px;\" valign=\"top\"\u003e\n\u003cdiv\u003ePackage\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 328.92px;\" valign=\"top\"\u003e\n\u003cdiv\u003esealed in class 100 clean bags \u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/onlinelibrary.wiley.com\/doi\/abs\/10.1002\/0470871687.ch21\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGrowth of Zirconia Crystals by Skull Melting Technique\u003c\/a\u003e (Chapter 21 in Crystal Growth Technology)\u003cbr\u003eE. E. Lomonova V. V. Osiko\u003cbr\u003eBook Editor(s): Hans J. Scheel Tsuguo Fukuda\u003cbr\u003eFirst published: 23 September 2003\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aip.scitation.org\/doi\/abs\/10.1063\/1.126461\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHighly electrically conductive indiumtinoxide thin films epitaxially grown on yttria-stabilized zirconia (100) by pulsed-laser deposition\u003c\/a\u003e\u003cbr\u003eAppl. Phys. Lett. 76, 2740 (2000), https:\/\/doi.org\/10.1063\/1.126461\u003cbr\u003eHiromichi Ohta, Masahiro Orita, and Masahiro Hirano\u003c\/p\u003e","brand":"MSE Supplies LLC","offers":[{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Single Side Polished (SSP)","offer_id":40204170592314,"sku":"SU1501","price":30.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Double Side Polished (DSP)","offer_id":40204170625082,"sku":"SU1502","price":38.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204171051066,"sku":"SU1503","price":21.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170919994,"sku":"SU1504","price":18.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170395706,"sku":"SU1505","price":12.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 1 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170821690,"sku":"SU1506","price":164.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170428474,"sku":"SU1507","price":16.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 5 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170461242,"sku":"SU1508","price":18.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 5 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170494010,"sku":"SU1509","price":23.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170526778,"sku":"SU1510","price":23.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170559546,"sku":"SU1511","price":30.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170952762,"sku":"SU1512","price":21.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170985530,"sku":"SU1513","price":38.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171018298,"sku":"SU1514","price":42.95,"currency_code":"USD","in_stock":true},{"title":"(111) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171083834,"sku":"SU1515","price":27.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 1 inch x 1 inch x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170657850,"sku":"SU1516","price":127.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 2 inch x 2 inch x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170723386,"sku":"SU1517","price":446.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204171116602,"sku":"SU1518","price":49.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171149370,"sku":"SU1519","price":54.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 1 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170788922,"sku":"SU1520","price":142.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204170854458,"sku":"SU1521","price":413.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 1 inch x 1 inch x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170690618,"sku":"SU1522","price":149.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 2 inch x 2 inch x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170756154,"sku":"SU1523","price":490.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204170887226,"sku":"SU1524","price":439.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 3 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204171247674,"sku":"SU1527","price":765.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 3 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171345978,"sku":"SU1528","price":870.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 1 inch x 1 inch x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204171182138,"sku":"SU1529","price":175.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 3 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204171280442,"sku":"SU1530","price":826.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 3 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171313210,"sku":"SU1531","price":820.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 1 inch x 1 inch x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204171214906,"sku":"SU1532","price":197.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 1 inch x 0.5 inch x 0.5 mm \/ Single Side Polished (SSP)","offer_id":41024276529210,"sku":"SU1533","price":85.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/080_MSE_PRO_Yttria_Stabilized_Zirconia_YSZ_Single_Crystal_Substrates_c905c3817d.jpg?v=1777608384"},{"product_id":"mse-pro-ndgao-sub-3-sub-neodymium-gallate-crystal-substrate","title":"MSE PRO NdGaO\u003csub\u003e3\u003c\/sub\u003e Neodymium Gallate Crystal Substrate","description":"\u003ctable style=\"width: 542px;\" cellspacing=\"0\" cellpadding=\"0\" border=\"1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 538px;\" colspan=\"2\"\u003e\n\u003cdiv\u003e\u003cstrong\u003eMain Parameters\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eCrystal structure\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003eorthorhombic Pnma space group, Perovskite structured\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003eGrowth method\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003eCzochralski\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eUnit cell constants\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003ea=5.43, b=5.50, c=7.71\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eMelting point\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e1600~1873K\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eDensity\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e7.57 g\/cm\u003csup data-mce-fragment=\"1\"\u003e3\u003c\/sup\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eDielectric constant\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e25\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003eLoss tangent\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cspan\u003e3x10\u003c\/span\u003e\u003csup\u003e-3\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eHardness\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e5.9 Mohs\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eSize\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e5x5 mm, 10x10 mm, customized sizes are available upon request\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eThickness\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e0.5mm, 1.0mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003ePolishing\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003eSingle or double side polished\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eCrystal orientation\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e(001), (100), (110), (011)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eOrientation precision\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e+\/-0.5°\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003eSurface Roughness Ra:\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003e\u0026lt; 0.5 nm (5µm x 5µm area)\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 134px;\"\u003e\n\u003cdiv\u003ePackage\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 404px;\"\u003e\n\u003cdiv\u003eSealed in a class 100 clean bag packed in class 1000 clean room\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout NdGaO3 Neodymium Gallate Crystal\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNdGaO\u003csub\u003e3\u003c\/sub\u003e crystal is a new single-crystal substrate material developed in recent years. NdGaO\u003csub\u003e3\u003c\/sub\u003esubstrates are mainly used for high-temperature superconductors (YBCO) and magnetic Epitaxial films growth, becauseNdGaO\u003csub\u003e3 \u003c\/sub\u003eand YBCO have small lattice mismatch (~0.27%), and no structural phase change at the crystal interface.\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"(001) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164300858,"sku":"SU3701","price":160.95,"currency_code":"USD","in_stock":true},{"title":"(001) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164333626,"sku":"SU3702","price":182.95,"currency_code":"USD","in_stock":true},{"title":"(001) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164366394,"sku":"SU3703","price":296.95,"currency_code":"USD","in_stock":true},{"title":"(001) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164399162,"sku":"SU3704","price":318.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164431930,"sku":"SU3705","price":160.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164464698,"sku":"SU3706","price":182.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164497466,"sku":"SU3707","price":296.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164530234,"sku":"SU3708","price":318.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164563002,"sku":"SU3709","price":105.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164595770,"sku":"SU3710","price":116.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164628538,"sku":"SU3711","price":296.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164661306,"sku":"SU3712","price":318.95,"currency_code":"USD","in_stock":true},{"title":"(011) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164694074,"sku":"SU3715","price":296.95,"currency_code":"USD","in_stock":true},{"title":"(011) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164726842,"sku":"SU3716","price":318.95,"currency_code":"USD","in_stock":true},{"title":"(011) \/ 5 mm x 5 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204164759610,"sku":"SU3713","price":160.95,"currency_code":"USD","in_stock":true},{"title":"(011) \/ 5 mm x 5 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204164792378,"sku":"SU3714","price":160.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/105_MSE_PRO_NdGaO_sub_3_sub_Neodymium_Gallate_Crystal_Substrate_1398ca3b60.jpg?v=1777608811"},{"product_id":"mse-pro-nacl-sodium-chloride-crystal-substrates-2","title":"MSE PRO NaCl Sodium Chloride Crystal Substrates","description":"\u003cp\u003eSodium Chloride (NaCl) Crystal Substrates\u003c\/p\u003e\n\u003cp\u003eNaCl single crystal substrates are commonly used as substrate materials for expitaxial thin film growth. NaCl is hygroscopic by nature and very sensitive to moisture. NaCl crystal substrates must be stored in desiccator container to avoid hydration.  \u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" width=\"568\"\u003e\n\u003cp\u003e\u003cb\u003eMain Parameters\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eCrystal structure\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e\u003cspan\u003eFace-centered cubic, FCC\u003c\/span\u003e\u003cspan\u003e, lattice constant \u003c\/span\u003ea=5.64 A\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eGrowth method\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003ecrystallization process\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eDensity\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e2.165 \u003cspan\u003e g\/cm\u003c\/span\u003e\u003csup\u003e3\u003c\/sup\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eMelting Point\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e801°C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eRefractive index\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e1.5442 (at 589 nm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eSurface roughness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e\u003cspan\u003e~10 nm due to hygroscopic nature\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003eOrientation\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e(100), (110), (111), +\/- 3 degrees\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003esize\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003e10 x 10 x 0.5 mm, 10 x 10 x 2.0 mm, 20 x 20 x 2.0 mm or other sizes upon request\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003ePolishing condition\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003eSingle side or double side polished\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"187\"\u003e\n\u003cp\u003ePackaging\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"380\"\u003e\n\u003cp\u003eNaCl substrates are packed in class 1000 clean rooms with class 100 grade plastic bags\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MSE Supplies","offers":[{"title":"(100) \/ 10x10x2.0 mm \/ Single Side Polished (SSP)","offer_id":40204159090746,"sku":"SU0203","price":71.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 10x10x2.0 mm \/ Double Side Polished (DSP)","offer_id":40204159123514,"sku":"SU0204","price":93.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 10x10x2.0 mm \/ Single Side Polished (SSP)","offer_id":40204159156282,"sku":"SU0208","price":164.95,"currency_code":"USD","in_stock":true},{"title":"(111) \/ 10x10x2.0 mm \/ Single Side Polished (SSP)","offer_id":40204159189050,"sku":"SU0207","price":208.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 10x10x0.5 mm \/ Single Side Polished (SSP)","offer_id":40204159221818,"sku":"SU0201","price":76.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 10x10x0.5 mm \/ Double Side Polished (DSP)","offer_id":40204159254586,"sku":"SU0210","price":98.95,"currency_code":"USD","in_stock":true},{"title":"(110) \/ 10x10x2.0 mm \/ Double Side Polished (DSP)","offer_id":40204159287354,"sku":"SU0209","price":186.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 20x20x1 mm \/ Single Side Polished (SSP)","offer_id":40560189964346,"sku":"SU0211","price":138.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/339_MSE_PRO_NaCl_Sodium_Chloride_Crystal_Substrates_c84a31db78.jpg?v=1777611720"},{"product_id":"mse-pro-3-2-mm-6-9-ohm-sq-tec-8-fto-coated-glass-substrates","title":"MSE PRO 3.2 mm 6-9 Ohm\/Sq TEC 8 FTO Coated Glass Substrates","description":"\u003ch2\u003e\n\u003cstrong\u003eTEC 8\u003c\/strong\u003e \u003cstrong\u003eFluorine Doped Tin Oxide (F-SnO2 or FTO) transparent conductive substrate, FTO TEC 8 glass substrates, 3.2 mm thickness\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/products\/mse-pro-1-1-mm-12-15-ohm-sq-ito-coated-glass-substrate\"\u003eFor ITO glass substrates please click here.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cem\u003eFree Samples\u003c\/em\u003e\u003c\/strong\u003e are available upon request for preliminary testing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #000000;\"\u003eFTO Patterns can be custom made based on customer's requirements.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003e\u003cspan\u003eSpecifications of TEC 8 glass:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlass: Pilkington NSG TEC Glass TEC 8.\u003cspan style=\"color: #0000ff;\"\u003e \u003ca href=\"https:\/\/www.msesupplies.com\/products\/fluorine-doped-tin-oxide-fto-coated-tec-15-glass-tec15-fto-can-customize-pattern-as-required\" title=\"TEC 15, TEC15. FTO, substrate, glass\" style=\"color: #0000ff;\"\u003eTEC 15 (12-15 ohm\/sq)\u003c\/a\u003e\u003c\/span\u003e and TEC 7 (7-8 ohm\/sq), other types are available upon request.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eTEC 7 offers the lowest resistivity value in the NSG TEC range. Combined with relatively low haze, it can be used for a wide range of applications.\u003c\/li\u003e\n\u003cli\u003eTEC 15 is the best choice for applications requiring passive condensation control and thermal performance with low-emissivity and clear color-neutral appearance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eGlass Transition Temperature: 564°C (1,047°F ) for soda-lime glass substrate\u003c\/li\u003e\n\u003cli\u003eTypical Dimensions: 1\" x 1\" (25 mm x 25 mm), 2\" x 2\", 4\" x 4\", 6\" x 6\", or can be customized to any size specified by the customer.\u003c\/li\u003e\n\u003cli\u003eGlass thickness: 3.2 mm, FTO glass with other sizes are available upon request\u003c\/li\u003e\n\u003cli\u003eNominal FTO film thickness: 600 nm\u003c\/li\u003e\n\u003cli\u003eSpecial Patterns: can be customized according to customer provided drawings.\u003c\/li\u003e\n\u003cli\u003eSheet resistance: 6-9 ohm\/sq\u003c\/li\u003e\n\u003cli\u003eEtching Capability: Laser etching or wet etching for detailed patterns.  \u003cspan\u003eBoth techniques have a resolution of \u003c\/span\u003e\u003cspan\u003e+\/- 50um.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eVisible Light Transmittance: \u0026gt;80% (80-81.5%)\u003c\/li\u003e\n\u003cli\u003eUV Transmittance: \u0026gt;46%\u003c\/li\u003e\n\u003cli\u003eHaze: 12%\u003c\/li\u003e\n\u003cli\u003eEmissivity (EN 12898): 0.12\u003c\/li\u003e\n\u003cli\u003eMaximum operating temperature: Although the FTO film can be heated up to 700°C, the soda lime glass (SLG) substrate has a glass transition temperature of 564°C. The recommended maximum operating temperature for FTO coated SLG substrates is up to 550°C.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: USA\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ctable width=\"647\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"6\" width=\"647\"\u003e\n\u003ch3\u003e\u003cb\u003eFTO coated conductive glass substrates (TEC Glass)\u003c\/b\u003e\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eGrade (ohm\/sq)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e\n\u003cp\u003eSize: L x W (mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eThickness (mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e\n\u003cp\u003eMinimum of Order\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003ePrices of non-etched ($\/sheet)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003ePrices of etched pattern ($\/sheet)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eTEC 8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e\n\u003cp\u003e10x10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003e3.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e\n\u003cp\u003e100 sheets\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e1.99\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003ePOD\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eTEC 8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e\n\u003cp\u003e25x25\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003e3.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e\n\u003cp\u003e100 sheets\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e2.59\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e\u003cspan\u003ePOD\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eTEC 8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e\n\u003cp\u003e50x50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003e3.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e\n\u003cp\u003e50 sheets\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e5.98\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e\u003cspan\u003ePOD\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003eTEC 8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e\n\u003cp\u003e100x100\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e\n\u003cp\u003e3.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e\n\u003cp\u003e25 sheets\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e12.50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e\n\u003cp\u003e\u003cspan\u003ePOD\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"97\"\u003eTEC 8\u003c\/td\u003e\n\u003ctd width=\"98\"\u003e150x150\u003c\/td\u003e\n\u003ctd width=\"97\"\u003e3.2\u003c\/td\u003e\n\u003ctd width=\"119\"\u003e10 sheets\u003c\/td\u003e\n\u003ctd width=\"117\"\u003e25.90\u003c\/td\u003e\n\u003ctd width=\"117\"\u003ePOD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e*POD - For Price On Demand, \u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us\" title=\"contact us\"\u003eContact Us\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eApplications for 6-9 Ohm\/Sq FTO TEC 8 Glass\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eHigh quality sputtered f\u003cspan\u003eluorine-doped tin oxide (FTO)\u003c\/span\u003e films can be used as electrodes for thin film photovoltaic \/solar cells (\u003cspan lang=\"NO-BOK\"\u003edye-sensitized cells, organic solar cells\u003c\/span\u003e), LED display, electrochemical deposition, capacitors, Infrared detection, \u003cspan\u003eenergy-saving windows, RFI\/EMI shielding and other electro-optical and insulating applications\u003c\/span\u003e. \u003cspan\u003eFluorine doped tin oxide is relatively stable under atmospheric conditions, chemically inert, mechanically hard and abrasion tolerant, high-temperature resistant and has lower cost than indium tin oxide (ITO). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFTO is well recognized as an attractive material because \u003c\/span\u003eit is relatively stable under atmospheric conditions, chemically inert, mechanically hard, \u003cspan\u003ehigh-temperature resistant, and has a high tolerance to physical abrasion.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCustomer Testimonials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarlos Biaou, a PhD student at \u003ca href=\"http:\/\/www.msesupplies.com\/collections\/berkeley.edu\" target=\"_blank\"\u003eUC Berkeley\u003c\/a\u003e worked with \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\"\u003eMSE Supplies\u003c\/a\u003e to fabricate several hundred customized \u003ca href=\"http:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\" title=\"customized ITO and FTO substrates\"\u003eITO and FTO substrates\u003c\/a\u003e for his thesis research, and he had a very positive feedback on the products and services he received from \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\"\u003eMSE Supplies\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003e\"The uniformity of the ITO and FTO layers were excellent, and the custom pattern I ordered was well formed.\" \u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\"The variation in size from substrate to substrate is within the margins of errors I needed, so that's great too.\" \u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e\"I appreciate the great customer service and diligence you've shown in customizing my substrates.\" \u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eDr. Selma Duhovi from \u003ca href=\"http:\/\/web.mit.edu\/\" target=\"_blank\"\u003eMIT\u003c\/a\u003e has used the \u003ca href=\"http:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\" title=\"customized ITO and FTO substrates\"\u003eITO and FTO substrates\u003c\/a\u003e\u003cspan\u003e provided by \u003c\/span\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\"\u003eMSE Supplies\u003c\/a\u003e for smart glass application, and has been very satisfied with the products and services provided by \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/photovoltaics-solar-cells\"\u003eMSE Supplies\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ci\u003e\"The FTO and ITO glass slides you sent me work GREAT!\"\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003e\"The substrates work really well for smart glass application.\"\u003c\/i\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ci\u003e\"The experiments have gone well!\" \u003c\/i\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eTypical Academia Customers\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eNREL, PNNL, UC Berkeley, Stanford, UCLA, Caltech, MIT, Yale, University of Michigan, Cornell, University of Chicago, State University of New York (SUNY), McMaster Univ., National Physical Laboratory (NPL), Cambridge University, etc.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFTO Glass Substrates Related Publications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.researchgate.net\/publication\/330921061_Rapid_Flame-annealed_CuFe2O4_as_Efficient_Photocathode_for_Photoelectrochemical_Hydrogen_Production\" target=\"_blank\"\u003eRapid Flame-annealed CuFe2O4 as Efficient Photocathode for Photoelectrochemical Hydrogen Production\u003c\/a\u003e, \u003cspan\u003e\u003ci\u003e\u003cstrong\u003eACS Sustainable Chem. Eng\u003c\/strong\u003e. \u003c\/i\u003e\u003c\/span\u003e\u003cspan\u003e2019, \u003c\/span\u003e\u003cspan\u003e7, \u003c\/span\u003e\u003cspan\u003e6, \u003c\/span\u003e\u003cspan\u003e5867-5874, \u003c\/span\u003ePARK, SANGWOOK \u0026amp; Baek, Jihyun \u0026amp; Zhang, Liang \u0026amp; Lee, Jae Myeong \u0026amp; H Stone, Kevin \u0026amp; Cho, In Sun \u0026amp; Guo, Jinghua \u0026amp; Jung, Hyun \u0026amp; Zheng, Xiaolin. \u003ca href=\"https:\/\/doi.org\/10.1021\/acssuschemeng.8b05824\" title=\"DOI URL\"\u003ehttps:\/\/doi.org\/10.1021\/acssuschemeng.8b05824\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv style=\"padding-left: 30px;\"\u003e\u003cem\u003e\"Synthesis of CuFe2O4 Film on FTO Substrate by Flame and Furnace. All samples were prepared on fluorine-doped tin oxide (FTO) coated-glass substrates (\u003cstrong\u003eTEC 7, 78\/sq, MSE Supplies\u003c\/strong\u003e).The FTO substrates were cleaned in acetone, IPA, and DI water, with sonication for 15 min, and were dried by an air gun. The CuFe2O4 precursor was prepared by the solgel method and was spin-coated on FTO glass for both annealing methods at 3000 rpm for 60 s.\"\u003c\/em\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/science.sciencemag.org\/content\/355\/6326\/722\" target=\"_blank\"\u003eEfficient and stable solution-processed planar perovskite solar cells via contact passivation\u003c\/a\u003e, \u003cstrong\u003eScience\u003c\/strong\u003e 17 Feb 2017: Vol. 355, Issue 6326, pp. 722-726, Hairen Tan, Ankit Jain, Oleksandr Voznyy, Xinzheng Lan, F. Pelayo García de Arquer, James Z. Fan, Rafael Quintero-Bermudez, Mingjian Yuan, Bo Zhang, Yicheng Zhao, Fengjia Fan, Peicheng Li, Li Na Quan, Yongbiao Zhao, Zheng-Hong Lu, Zhenyu Yang, Sjoerd Hoogland, Edward H. Sargent\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.sciencedirect.com\/science\/article\/pii\/S0040609007009157\" title=\"pdf_Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%\" target=\"_blank\"\u003eFabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%\u003c\/a\u003e, \u003cstrong\u003eThin Solid Films\u003c\/strong\u003e, Volume 516, Issue 14, 30 May 2008, Pages 46134619, Seigo Ito, Takurou N. Murakami, Pascal Comte, Paul Liska, Carole Grätzel, Mohammad K. Nazeeruddin, Michael Grätzel\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.nature.com\/nature\/journal\/v517\/n7535\/abs\/nature14133.html\" title=\"pdf Compositional engineering of perovskite materials for high-performance solar cells\" target=\"_blank\"\u003eCompositional engineering of perovskite materials for high-performance solar cells\u003c\/a\u003e, \u003cstrong\u003eNature\u003c\/strong\u003e 517, 476480 (22 January 2015) doi:10.1038\/nature14133, Nam Joong Jeon, Jun Hong Noh, Woon Seok Yang, Young Chan Kim, Seungchan Ryu, Jangwon Seo \u0026amp; Sang Il Seok\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.nature.com\/articles\/srep01352\" title=\"Hydrothermal Fabrication of Hierarchically Anatase TiO2 Nanowire arrays on FTO Glass for Dye-sensitized Solar Cells\" target=\"_blank\"\u003eHydrothermal fabrication of hierarchically anatase TiO2 nanowire arrays on FTO glass for dye-sensitized solar cells\u003c\/a\u003e, \u003cstrong\u003eScientific Reports\u003c\/strong\u003e 3, Article number: 1352 (2013)\u003cbr\u003edoi:10.1038\/srep01352, Wu-Qiang Wu, Bing-Xin Lei, Hua-Shang Rao, Yang-Fan Xu, Yu-Fen Wang, Cheng-Yong Su \u0026amp; Dai-Bin Kuang\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"http:\/\/www.sciencedirect.com\/science\/article\/pii\/S2211285515000877\" title=\"Ultra-thin high efficiency semitransparent perovskite solar cells\" target=\"_blank\"\u003eUltra-thin high efficiency semitransparent perovskite solar cells\u003c\/a\u003e, \u003cstrong\u003eNano Energy\u003c\/strong\u003e\u003cbr\u003eVolume 13, April 2015, Pages 249-57, Enrico Della Gasperaa, Yong Peng, Qicheng Hou, Leone Spicciac, Udo Bacha, Jacek J. Jasieniaka, Yi-Bing Cheng\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"10mm x 10mm x 3.2mm, 100 PC\/PK","offer_id":30961963302970,"sku":"GL0236","price":208.95,"currency_code":"USD","in_stock":true},{"title":"25mm x 25mm x 3.2mm, 100 PC\/PK","offer_id":30961963335738,"sku":"GL0237","price":274.95,"currency_code":"USD","in_stock":true},{"title":"50mm x 50mm x 3.2mm, 50PC\/PK","offer_id":30961963401274,"sku":"GL0238","price":318.95,"currency_code":"USD","in_stock":true},{"title":"100mm x 100mm x 3.2mm, 25PC\/PK","offer_id":30961963434042,"sku":"GL0239","price":329.95,"currency_code":"USD","in_stock":true},{"title":"150mm x 150mm x 3.2mm, 10PC\/PK","offer_id":30961963368506,"sku":"GL0240","price":285.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/702_MSE_PRO_3_2_mm_6-9_Ohm_Sq_TEC_8_FTO_Coated_Glass_Substrates_3d8f58da1a.jpg?v=1777616657"},{"product_id":"mse-pro-0-25-6-35-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.25\" (6.35 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.25\" (6.35 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.25\" diameter dry pellet pressing die set uses pressure to compress powder into 0.25\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with particle size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0101 \u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.25\" (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 20 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 2 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31230709366842,"sku":"PR0101","price":307.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/724_MSE_PRO_0_25_6_35_mm_Diameter_Dry_Pellet_Pressing_Die_Set_f33bb2b497.jpg?v=1777616926"},{"product_id":"mse-pro-0-4-10-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.4\" (10 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.4\" diameter dry pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cem\u003e\u003cstrong\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0102\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231021547578,"sku":"PR0102","price":313.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/725_MSE_PRO_0_4_10_mm_Diameter_Dry_Pellet_Pressing_Die_Set_ad37ebc033.jpg?v=1777616940"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.5\" (12.7 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.5\" diameter dry pellet pressing die set uses pressure to compress powder into 0.5\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" data-mce-href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend using this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0103\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 12.7 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: 3Cr13 and 440C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231026430010,"sku":"PR0103","price":355.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/726_MSE_PRO_0_5_12_7_mm_Diameter_Dry_Pellet_Pressing_Die_Set_db1f2f306e.jpg?v=1777616954"},{"product_id":"mse-pro-1-0-25-4-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 1.0\" (25.4 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e1.0\" (25.4 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 1.0\" diameter dry pellet pressing die set uses pressure to compress powder into 1.0\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0104\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 1 inch (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231029805114,"sku":"PR0104","price":478.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/727_MSE_PRO_1_0_25_4_mm_Diameter_Dry_Pellet_Pressing_Die_Set_1aca4b66a1.jpg?v=1777616968"},{"product_id":"mse-pro-2-0-50-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 2.0\" (50 mm) Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e2.0\" (50 mm) Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 2.0\" diameter dry pellet pressing die set uses pressure to compress powder into 2.0\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0105\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, and 1 Release Ring\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 50 mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 55 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 100 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: \u003cspan data-mce-fragment=\"1\"\u003estainless steel: 440C and 3Cr13\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/50mm_2_inch_powder_pressing_die_480x480.jpg?v=1597335652\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31231032033338,"sku":"PR0105","price":655.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/728_MSE_PRO_2_0_50_mm_Diameter_Dry_Pellet_Pressing_Die_Set_5ef6590bef.jpg?v=1777616981"},{"product_id":"mse-pro-holmium-iii-oxide-ho-sub-2-sub-o-sub-3-sub-99-99-4n-powder","title":"MSE PRO Holmium (III) Oxide (Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e) 99.99% 4N Powder","description":"\u003cp\u003e\u003cstrong\u003eHolmium (III) \u003c\/strong\u003e\u003cstrong\u003eOxide\u003c\/strong\u003e\u003cstrong\u003e, Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e, 99.99% 4N High Purity Powder\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Number: \u003cstrong\u003ePO3001\u003c\/strong\u003e (50 g), \u003cstrong\u003ePO3002\u003c\/strong\u003e (100 g), \u003cstrong\u003ePO3004\u003c\/strong\u003e (500g) \u003cstrong\u003ePO3003\u003c\/strong\u003e (1 kg)\u003c\/li\u003e\n\u003cli\u003eFormula: Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e\n\u003c\/li\u003e\n\u003cli\u003eCAS Number: 12055-62-8\u003c\/li\u003e\n\u003cli\u003eMolecular Weight: 377.86  g\/mol\u003c\/li\u003e\n\u003cli\u003eDensity: 8.41 g\/cm³ at 25°C\u003c\/li\u003e\n\u003cli\u003eMelting Point: 2415°C\u003c\/li\u003e\n\u003cli\u003eColor: pale yellow powder\u003c\/li\u003e\n\u003cli\u003eSolubility: Insoluble in water.\u003c\/li\u003e\n\u003cli\u003ePurity: 99.99% 4N (\u003cspan\u003eHo\u003c\/span\u003e\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003eO\u003c\/span\u003e\u003csub\u003e3\u003c\/sub\u003e\/TREO*), Total Rare Earth Oxide (TREO) \u0026gt; 99.7%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cem data-mce-fragment=\"1\"\u003e* TREO - Total Rare Earth Oxides\u003c\/em\u003e\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplications  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHolmium(III) oxide, Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003eis one of the colorants used for cubic zirconia and glass, providing yellow or red coloring. Glass containing holmium oxide and holmium oxide solutions (usually in perchloric acid) have sharp optical absorption peaks in the spectral range 200-900 nm. They are therefore used as a calibration standard for optical spectrophotometers and are available commercially. As most other oxides of rare-earth elements, holmium oxide is used as a specialty catalyst, phosphor and a laser material. Holmium laser operates at wavelength of about 2.08 micrometres, either in pulsed or continuous regime. This laser is eye safe and is used in medicine, lidars, wind velocity measurements and atmosphere monitoring.\u003c\/p\u003e\n\u003cp\u003eNotes: More detailed product information including SDS, certificate of analysis (COA), lead time and volume pricing are available upon request. \u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cstrong\u003eRare Earth Impurities Content (ppm)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cstrong\u003eNon- Rare Earth Impurities Content (ppm)\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eGd\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3 \u003c\/sub\u003e\u003cspan\u003eEu\u003c\/span\u003e\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003eO\u003c\/span\u003e\u003csub\u003e3 \u003c\/sub\u003eSm\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3 \u003c\/sub\u003eNd\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3 \u003c\/sub\u003ePr\u003csub\u003e6\u003c\/sub\u003eO\u003csub\u003e11\u003c\/sub\u003e\u003cspan\u003e \u003c\/span\u003eLa\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e CeO\u003csub\u003e2\u003c\/sub\u003e   \u003c\/p\u003e\n\u003cp\u003eTotal \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eFe\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;5.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Tb\u003csub\u003e4\u003c\/sub\u003eO\u003csub\u003e7\u003c\/sub\u003e   \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eSiO\u003csub\u003e2\u003c\/sub\u003e  \u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u0026lt;3\u003c\/span\u003e0.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Dy\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;20.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eCaO   \u003cspan\u003e \u003c\/span\u003e\u003cspan\u003e\u0026lt;20.0\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Er\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;20.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eCl\u003csup\u003e-\u003c\/sup\u003e   \u0026lt;200.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Tm\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cspan\u003eNa\u003c\/span\u003e\u003csub\u003e2\u003c\/sub\u003e\u003cspan\u003eO\u003c\/span\u003e \u003cspan\u003e\u0026lt;20.0\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Yb\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eOthers \u003cspan\u003e\u0026lt;10.0\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Lu\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e Y\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e   \u0026lt;10.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.osapublishing.org\/ome\/fulltext.cfm?uri=ome-7-3-827\u0026amp;id=359976\" target=\"_blank\"\u003eMagneto-optical characteristics of holmium oxide (Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e) ceramics.\u003c\/a\u003e H. Furuse, and R. Yasuhara. Optical Materials Express Vol. 7(3), Pgs. 827-833, 2017.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.cambridge.org\/core\/journals\/high-power-laser-science-and-engineering\/article\/faraday-effect-measurements-of-holmium-oxide-ho2o3-ceramicsbased-magnetooptical-materials\/11BFF972BFB9469FC89552F947B66AC8\/core-reader\" target=\"_blank\"\u003eFaraday effect measurements of holmium oxide (Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e) ceramics-based magneto-optical materials\u003c\/a\u003e. D. Vojna, R. Yasuhara, H. Furuse, O.Slezak, S. Hutchinson, A. Lucianetti, T. Mocek, and M. CechHigh Power Lasers and Engineering Vol. 6(2), 2018. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/1757-899X\/310\/1\/012032\/pdf\" target=\"_blank\"\u003eOptical and Physical Investigations of Lanthanum Bismuth Borate glasses doped with Ho\u003csub\u003e2\u003c\/sub\u003eO\u003csub\u003e3\u003c\/sub\u003e\u003c\/a\u003e. P. Ramesh, G. Jagannath, B. Eraiah, and M.K. Kokila. IOP Conference Series: Materials Science and Engineering Vol. 310, 2018.\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"50g","offer_id":31405247791162,"sku":"PO3001","price":259.95,"currency_code":"USD","in_stock":true},{"title":"100g","offer_id":31405247823930,"sku":"PO3002","price":435.95,"currency_code":"USD","in_stock":false},{"title":"500g","offer_id":39364069425210,"sku":"PO3004","price":1425.95,"currency_code":"USD","in_stock":true},{"title":"1kg","offer_id":31405247856698,"sku":"PO3003","price":2195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/792_MSE_PRO_Holmium_III_Oxide_Ho_sub_2_sub_O_sub_3_sub_99_99_4N_Powder_36690875d8.jpg?v=1777648389"},{"product_id":"mse-pro-undoped-yttrium-aluminum-garnet-y-sub-3-sub-al-sub-5-sub-o-sub-12-sub-yag-single-crystal-substrates","title":"MSE PRO Undoped Yttrium Aluminum Garnet (Y\u003csub\u003e3\u003c\/sub\u003eAl\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e, YAG) Single Crystal Substrates","description":"\u003cp\u003eUndoped YAG is a substrate and window material for both IR and UV optics.  Undoped YAG is highly transmissive in the IR region where glasses tend to absorb.  YAG is much easier to polish to optical specifications but retains the chemical robustness near that of Sapphire.  YAG is a non-birefringent material. \u003c\/p\u003e\n\u003ctable style=\"width: 533px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" style=\"width: 517px;\"\u003e\n\u003cp\u003e\u003cstrong\u003eMain Parameters of undoped YAG single crystal substrates\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eMaterial\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eUndoped-Yttrium Aluminum Garnet, Y\u003csub\u003e3\u003c\/sub\u003eAl\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eCrystal structure\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eCubic, Ia-3d (m3m)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eUnit cell constant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003ea = 10.503 A\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eMelt point (ºC)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1940\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eDensity (g\/cm\u003csup\u003e3\u003c\/sup\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e4.56\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e8.5 Mohs\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThermal expansion (x 10\u003csup\u003e-6\u003c\/sup\u003e K\u003csup\u003e-1\u003c\/sup\u003e )\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e8.2 (100), 7.7 (110), 7.8 (111)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThermal Conductivity (W m\u003csup\u003e-1\u003c\/sup\u003e K\u003csup\u003e-1\u003c\/sup\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eRefractive Index @1.064 µm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1.8152\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eDielectric Constant\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e11.7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\" style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSizes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e5x5, 10x5, 10x10, 25.4x25.4, 50.8x50.8 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e1 inch diameter, 2 inch diameter, other sizes are available upon request\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eThickness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e0.5 mm or 1.0 mm or customized\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSurface polishing\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003eSingle or double side polished (epi-ready CMP)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eCrystal orientation\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e(100), (110), (111), +\/- 0.5 degree\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003eSurface roughness, Ra:\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003e\u0026lt; 0.5 nm (5 um x 5 um area)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 250.318px;\"\u003e\n\u003cp\u003ePackage\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 266.682px;\"\u003e\n\u003cp\u003esealed in class 100 clean bags packed in class 1000 clean room\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReferences:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/aip.scitation.org\/doi\/10.1063\/1.3671646\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eC.R. Varney, S.M. Reda, D.T. Mackay, M.C. Rowe, and F.A. Selim. Strong visible and near infrared luminescence in undoped YAG single crystals AIP Advances 1, 042170 (2011)\u003c\/a\u003e\u003ca href=\"https:\/\/aip.scitation.org\/doi\/10.1063\/1.3671646\"\u003e; \u003c\/a\u003ehttps:\/\/doi.org\/10.1063\/1.3671646\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0030401812005196\"\u003eR\u003c\/a\u003e\u003ca href=\"https:\/\/www.sciencedirect.com\/science\/article\/abs\/pii\/S0030401812005196\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e.W. Stites and K.M. Ohara The Verdet constant of undoped Y\u003csub\u003e3\u003c\/sub\u003eAL\u003csub\u003e5\u003c\/sub\u003eO\u003csub\u003e12\u003c\/sub\u003e in the near infrared. Optics Comm. Vol 285(20), 2012, Pg. 3997-4000.\u003c\/a\u003e https:\/\/doi.org\/10.1016\/j.optcom.2012.06.008\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/iopscience.iop.org\/article\/10.1088\/0022-3727\/45\/1\/015103\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eC.R. Varney, S.M. Reda, D.T. Mackay, M.C. Rowe, and F.A. Selim. On the Optical Properties of Undoped and Rare-Earth-Doped Yttrium Aluminum Garnet Single Crystals Journal of Physics D Applied Physics 45(1), 2012\u003c\/a\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148310074,"sku":"SU3001","price":153.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148342842,"sku":"SU3002","price":175.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Single Side Polished (SSP)","offer_id":40204148375610,"sku":"SU3003","price":164.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 10 mm x 10 mm x 1.0 mm \/ Double Side Polished (DSP)","offer_id":40204148408378,"sku":"SU3004","price":175.95,"currency_code":"USD","in_stock":false},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148441146,"sku":"SU3005","price":820.95,"currency_code":"USD","in_stock":true},{"title":"(100) \/ 2 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148473914,"sku":"SU3006","price":864.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148506682,"sku":"SU3007","price":127.95,"currency_code":"USD","in_stock":false},{"title":"(110) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148539450,"sku":"SU3008","price":149.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148572218,"sku":"SU3009","price":127.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 10 mm x 10 mm x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148604986,"sku":"SU3010","price":149.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 2 inch diameter x 0.5 mm \/ Single Side Polished (SSP)","offer_id":40204148637754,"sku":"SU3011","price":699.95,"currency_code":"USD","in_stock":false},{"title":"(111) \/ 2 inch diameter x 0.5 mm \/ Double Side Polished (DSP)","offer_id":40204148670522,"sku":"SU3012","price":743.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/838_MSE_PRO_Undoped_Yttrium_Aluminum_Garnet_Y_sub_3_sub_Al_sub_5_sub_O_sub_12_sub_YA_01c32824b7.jpg?v=1777649093"},{"product_id":"mse-pro-nickel-sputtering-target-ni","title":"MSE PRO Nickel Sputtering Target Ni","description":"\u003ch3\u003eDescription of Nickel Sputtering Target\u003c\/h3\u003e\n\u003cp\u003eNickel is a hard, lustrous, silvery-white metal. It has a density of 8.91 g\/cc, a melting point of 1,453°C, and a vapor pressure of 10\u003csup\u003e-4 \u003c\/sup\u003eTorr at 1,262°C. Its key characteristics are malleability, ductility, and ferromagnetism and its polished surface resists tarnishing when exposed to air. It is the second most abundant element in earth's core next to iron. It is mainly used to make stainless steel, coins, and batteries. It can also be found in jewelry, but its presence has decreased due to skin allergies. When evaporated in vacuum, nickel can form a decorative coating on ceramic surfaces or a solder layer in circuit device fabrication. It is often sputtered to form layers in the production of magnetic storage media, fuel cells, and sensors.\u003c\/p\u003e\n\u003cp\u003eHigh purity Nickel metal targets with up to 99.995% purity are available (GDMS analysis data shown below). \u003cstrong\u003eUnit: ppm\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Ni_sputtering_target_GDMS_data_480x480.png?v=1583793601\" alt=\"high purity Nickel 99.995% sputtering targets\"\u003e\u003c\/p\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd align=\"left\"\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"element_title\" colspan=\"2\"\u003e\n\u003ch3\u003eNickel Sputtering Target Features\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"50%\"\u003e\n\u003cp align=\"left\"\u003eName: Nickel\u003cbr\u003eSymbol: Ni\u003cbr\u003eAtomic Number: 28\u003cbr\u003eAtomic Mass: 58.6934 amu\u003cbr\u003eMelting Point: 1453.0 °C (1726.15 K, 2647.4 °F)\u003cbr\u003eBoiling Point: 2732.0 °C (3005.15 K, 4949.6 °F)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" width=\"50%\"\u003e\n\u003cp align=\"left\"\u003eNumber of Protons\/Electrons: 28 \u003cbr\u003eNumber of Neutrons: 31\u003cbr\u003eClassification: Transition Metal\u003cbr\u003eCrystal Structure: Cubic\u003cbr\u003eDensity @ 293 K: 8.902 g\/cm\u003csup\u003e3\u003c\/sup\u003e\u003cbr\u003eColor: white\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"element_listname\"\u003e\n\u003ch4\u003eProduct List Nickel Sputtering Target and Related Products\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"elementnames\"\u003e\u003cstrong\u003eNickel Metal\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"element_title\"\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003eName\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSign\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePurity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCharacter\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNi\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003e99.9%, 99.99%, 99.995%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003ePowder(40-300mesh),Ingots, Sputtering Targets, Evaporation Material, Sheet, Disk, Plate, Foil, Strap, Rod, Wire\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"elementnames\"\u003e\u003cstrong\u003eNickel Alloys\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"element_title\"\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003eName\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cu\u003eComposition\u003c\/u\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan style=\"text-decoration: underline;\"\u003eForm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAluminum Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAlNi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAlNi 90\/10, 80\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots,Powders\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAluminum Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAlNi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eAlNi 75\/25, 31\/69\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots,Powders\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCalcium Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCaNi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCaNi5\/95\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eGranules, Powders\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCopper Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCuNi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eCuNi 90\/10,70\/30,50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLanthanum Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLaNi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLaNi 80\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Aluminum Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiAl Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiAl 50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003ebroken ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Boron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiB Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiB 85\/15\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Calcium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCa Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCa 94\/6, 87\/13\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps, Powders\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Calcium Magnesium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCaMg Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCaMg50\/44\/6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eBroken ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Chromium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCr Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiCr 80\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiobium Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNbFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNbFe 50\/50, 60\/40\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiobium Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNbFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNbFe 70\/30, 15\/85\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiFe 80\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Lanthanum Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiLa Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiLa 50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMg Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMg 95\/5, 85\/15, 80\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Manganese Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMn Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMn 40\/60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Cerium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgCe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgCe(MM) 85\/15\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFe 60\/5\/35\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Iron Cerium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeCe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeCe 60\/5\/35\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Iron Silicon Cerium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeSiCe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeSi 65\/15\/15\/5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Iron Silicon Cerium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeSiCe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgFeSi 50\/15\/15\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Silicon Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgSiFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgSiFe 47\/16\/20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Magnesium Silicon Iron Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgSiFe Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMgSiFe 60\/16\/6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Molybdenum Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMo Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiMo 80\/20, 50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots, Lumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Niobium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiNb Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiNb 35\/65, 40\/60\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots, Granules, Powders\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Tantalum Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTa Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTa 50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eIngots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Titanium Alumium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTiAl Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTiAl 62\/28\/10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Titanium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTi Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiTi 50\/50\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Tungsten Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiW Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiW 55\/45\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eLumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Vanadium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiV Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiV 40\/60, 93\/7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Ingots\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Zirconium Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiZr Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiZr 50\/50, 30\/70\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Lumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eZirconium Nickel Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eZrNi, Alloy\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eZrNi 70\/30,50\/50,30\/70\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Lumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"elementnames\"\u003e\u003cstrong\u003eNickel Compounds\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd align=\"left\"\u003e\n\u003ctable border=\"1\" cellpadding=\"0\" cellspacing=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr class=\"element_title\"\u003e\n\u003ctd width=\"24%\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eName\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"16%\"\u003e\u003c\/td\u003e\n\u003ctd width=\"25%\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePurity\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"35%\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eForm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNickel Oxide\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eNiO\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003e99.9%\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp align=\"left\"\u003eSputtering Target, Disk, Plate, Sheet, Pellet, Wire, Foil, Powders, Lumps\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"MSE Supplies","offers":[{"title":"1.0\" Dia. x 0.063\" Thick \/ 99.99%","offer_id":31706021494842,"sku":"TA7610","price":105.95,"currency_code":"USD","in_stock":true},{"title":"1.0\" Dia. x 0.125\" Thick \/ 99.9%","offer_id":31706021527610,"sku":"TA7611","price":98.95,"currency_code":"USD","in_stock":true},{"title":"1.0\" Dia. x 0.125\" Thick \/ 99.99%","offer_id":31706021560378,"sku":"TA7612","price":149.95,"currency_code":"USD","in_stock":true},{"title":"1.0\" Dia. x 0.125\" Thick \/ 99.995%","offer_id":40204146999354,"sku":"TA7613","price":130.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.063\" Thick \/ 99.9%","offer_id":31706021625914,"sku":"TA7614","price":105.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.063\" Thick \/ 99.99%","offer_id":31706021658682,"sku":"TA7615","price":149.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.125\" Thick \/ 99.9%","offer_id":31706021724218,"sku":"TA7616","price":100.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.125\" Thick \/ 99.99%","offer_id":31706021756986,"sku":"TA7617","price":149.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.125\" Thick \/ 99.995%","offer_id":40204147032122,"sku":"TA7618","price":188.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.250\" Thick \/ 99.90%","offer_id":31706021822522,"sku":"TA7619","price":143.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.250\" Thick \/ 99.99%","offer_id":31706021855290,"sku":"TA7620","price":161.95,"currency_code":"USD","in_stock":true},{"title":"2.0\" Dia. x 0.250\" Thick \/ 99.995%","offer_id":40204147064890,"sku":"TA7621","price":188.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.0625\" Thick \/ 99.995%","offer_id":40204147097658,"sku":"TA7622","price":161.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.063\" Thick \/ 99.90%","offer_id":31706021953594,"sku":"TA7623","price":130.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.063\" Thick \/ 99.99%","offer_id":31706021986362,"sku":"TA7624","price":142.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.125\" Thick \/ 99.90%","offer_id":31706022019130,"sku":"TA7625","price":140.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.125\" Thick \/ 99.99%","offer_id":31706022051898,"sku":"TA7626","price":151.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.125\" Thick \/ 99.995%","offer_id":40204147130426,"sku":"TA7627","price":182.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.250\" Thick \/ 99.90%","offer_id":31706022117434,"sku":"TA7628","price":156.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.250\" Thick \/ 99.99%","offer_id":31706022150202,"sku":"TA7629","price":233.95,"currency_code":"USD","in_stock":true},{"title":"3.0\" Dia. x 0.250\" Thick \/ 99.995%","offer_id":40204147163194,"sku":"TA7630","price":228.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.063\" Thick \/ 99.99%","offer_id":31706022215738,"sku":"TA7631","price":182.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.125\" Thick \/ 99.99%","offer_id":31706022248506,"sku":"TA7632","price":182.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.125\" Thick \/ 99.995%","offer_id":40204147195962,"sku":"TA7633","price":303.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.250\" Thick \/ 99.90%","offer_id":31706022314042,"sku":"TA7634","price":243.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.250\" Thick \/ 99.99%","offer_id":31706022346810,"sku":"TA7635","price":252.95,"currency_code":"USD","in_stock":true},{"title":"4.0\" Dia. x 0.250\" Thick \/ 99.995%","offer_id":40204147228730,"sku":"TA7636","price":324.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/883_MSE_PRO_Nickel_Sputtering_Target_Ni_f6cd29e4d8.jpg?v=1777649744"},{"product_id":"mse-pro-13mm-dry-pellet-pressing-die-for-ftir-kbr-pellet","title":"MSE PRO 13mm Dry Pellet Pressing Die for FTIR KBr Pellet","description":"\u003ch3\u003e13mm (12.7mm, actual) Dry Pellet Pressing Die for FTIR KBr Pellet\u003c\/h3\u003e\n\u003cp\u003eThis dry pellet pressing die is specially designed to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. The die is made from high quality, high hardness tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNot using enough powdered mixture or excess moisture in KBr can cause the pellets break. For a typical pellet preparation, 400 mg total KBr\/sample mixture under a load of 6 to 7 tons press will produce an approximately 1 to 1.5 mm thick pellet. Usually 0.1 to 2% weight to weight of sample to KBr is preferred for pellet pressing. \u003c\/span\u003e\u003cspan\u003ePlease use\u003c\/span\u003e\u003cspan\u003e spectroscopic grade KBr or halide salt powder for the best quality pellets. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e\u003cstrong\u003e13mm Dry Pellet Pressing Die for FTIR KBr Pellet\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0108\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eTungsten Carbide\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC68-HRC85\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\u003cspan\u003ePressing Force\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 10 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ12.7mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x78mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.76kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: The FTIR sample plate (on right side of figure) is not included in this pressing die set. You need take out the pellet after pressing and place it in the FTIR sample holder.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/KBr_die_03_480x480.png?v=1594744827\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/FTIR01_480x480.png?v=1595266574\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/KBr_die_480x480.png?v=1594680155\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31809704525882,"sku":"PR0108","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/973_MSE_PRO_13mm_Dry_Pellet_Pressing_Die_for_FTIR_KBr_Pellet_2db8853daf.jpg?v=1777693382"},{"product_id":"mse-pro-13mm-dry-pellet-pressing-die-for-ftir-kbr-pellet-preparation-without-demoulding","title":"MSE PRO 13mm Dry Pellet Pressing Die for FTIR KBr Pellet Preparation Without Demoulding","description":"\u003ch3\u003e13mm (12.7 mm, actual) Dry Pellet Pressing Die for FTIR KBr Pellet Preparation Without Demoulding\u003c\/h3\u003e\n\u003cp\u003eThis dry pellet pressing die is specially designed to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Compared with the traditional pressing die, die demoulding is not required after the sample press. The sample on the sample holder mold can be directly placed in the instrument for measurements. This can effectively avoid the pellet breaks due to handling. \u003c\/p\u003e\n\u003cp\u003eThe die is made from high quality, high hardness tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNot using enough powdered mixture or or excess moisture in KBr can cause the pellets break. For a typical pellet preparation, 400 mg total KBr\/sample mixture under a load of 6 to 7 tons press will produce an approximately 1 to 1.5 mm thick pellet. Usually 0.1 to 2% weight to weight of sample to KBr is preferred for pellet pressing. \u003c\/span\u003e\u003cspan\u003ePlease use\u003c\/span\u003e\u003cspan\u003e spectroscopic grade KBr or halide salt powder for the best quality pellets. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e13mm Dry Pellet Pressing Die for FTIR KBr Pellet Preparation Without Demoulding\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0109\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eTungsten Carbide\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC68-HRC85\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\u003cspan\u003ePressing Force:\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 10 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ12.7mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e10mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxWxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e75x50x70mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.75kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cimg height=\"252\" width=\"317\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/KBr_die_without_demoulding_02_480x480.png?v=1594755109\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/FTIR02_480x480.png?v=1595267272\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/KBr_die_without_demoulding_03_480x480.png?v=1594761469\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31811153788986,"sku":"PR0109","price":395.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/974_MSE_PRO_13mm_Dry_Pellet_Pressing_Die_for_FTIR_KBr_Pellet_Preparation_Without_Dem_e0be66b1e4.jpg?v=1777693409"},{"product_id":"mse-pro-6-35x6-35-mm-0-25x0-25-square-dry-pellet-pressing-die-set","title":"MSE PRO 6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 6.35x6.35 mm (0.25x0.25\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e6.35x6.35 mm (0.25x0.25\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0110\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force: \u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 2 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e6.35x6.35 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x93\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.65kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31811380576314,"sku":"PR0110","price":527.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/975_MSE_PRO_6_35x6_35_mm_0_25x0_25_Square_Dry_Pellet_Pressing_Die_Set_803a3606cc.jpg?v=1777693437"},{"product_id":"mse-pro-12-7x12-7-mm-0-5x0-5-square-dry-pellet-pressing-die-set","title":"MSE PRO 12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 12.7x12.7 mm (0.5x0.5\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e12.7x12.7 mm (0.5x0.5\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0111\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressings Force: \u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 10 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e12.7x12.7mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e30mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.2kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31813534875706,"sku":"PR0111","price":655.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/976_MSE_PRO_12_7x12_7_mm_0_5x0_5_Square_Dry_Pellet_Pressing_Die_Set_38b950731f.jpg?v=1777693465"},{"product_id":"mse-pro-25-4x25-4-mm-1x1-square-dry-pellet-pressing-die-set","title":"MSE PRO 25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 25.4x25.4 mm (1x1\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e25.4x25.4 mm (1x1\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0112\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 30 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e25.4x25.4mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e45mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ73x133mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e2.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\" alt=\"\" width=\"405\" height=\"368\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31813618237498,"sku":"PR0112","price":875.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/977_MSE_PRO_25_4x25_4_mm_1x1_Square_Dry_Pellet_Pressing_Die_Set_9731995ce8.jpg?v=1777693492"},{"product_id":"mse-pro-50x50-mm-2x2-square-dry-pellet-pressing-die-set","title":"MSE PRO 50x50 mm (2x2\") Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e50x50 mm (2x2\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 50x50 mm (2x2\") square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e50x50 mm (2x2\") Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0113\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 25 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e50x50mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e56mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ98x150mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e7.3kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"368\" width=\"405\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31814014500922,"sku":"PR0113","price":1293.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/978_MSE_PRO_50x50_mm_2x2_Square_Dry_Pellet_Pressing_Die_Set_afdfce913c.jpg?v=1777693519"},{"product_id":"mse-pro-40-mm-x-ray-fluorescence-spectroscopy-xrf-pellet-pressing-die-set","title":"MSE PRO 40 mm X-Ray Fluorescence Spectroscopy (XRF) Pellet Pressing Die Set","description":"\u003ch3\u003e40 mm X-Ray Fluorescence Spectroscopy (XRF) Pellet Pressing Die Set \u003c\/h3\u003e\n\u003cp\u003eThis pressing die set is commonly used for \u003cspan\u003eX-Ray Fluorescence spectroscopy (\u003c\/span\u003eXRF) pellet preparation. The die is made from high quality, high hardness steel, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor XRF measurements, compared with loose powder, pressed pellet samples show a higher signal-noise ratio which \u003cspan\u003eallows the detection of the lightest elements. Commonly, 20% (total weight) of boric acid powder is mixed with samples to make a good pellet. Spectroscopic grade is recommended for the best quality pellet.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e\u003cstrong\u003e40 mm X-Ray Fluorescence Spectroscopy (XRF) Pellet Pressing Die Set \u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003ePR0114\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eAlloy tool steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\u003cspan\u003emaximum 100 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eDiameter \u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eOD 40mm\u003c\/p\u003e\n\u003cp\u003eID 32mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e45mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eΦ73x133mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"312\"\u003e\n\u003cp\u003e3.2kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"336\" width=\"343\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/XRF_01_480x480.png?v=1594852979\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/xrf05_480x480.png?v=1595265237\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/XRF_02_480x480.png?v=1594917939\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31826203443258,"sku":"PR0114","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/979_MSE_PRO_40_mm_X-Ray_Fluorescence_Spectroscopy_XRF_Pellet_Pressing_Die_Set_24a7407f06.jpg?v=1777693547"},{"product_id":"mse-pro-6-mm-diameter-sphere-dry-pellet-pressing-die-set","title":"MSE PRO 6 mm Diameter Sphere Dry Pellet Pressing Die Set","description":"\u003ch3\u003e6 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 6mm (~0.25\") diameter sphere dry pellet pressing die set uses pressure to compress powder into 6 mm spherical pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for catalyst, gas absorption, battery, minerals, ceramic, or pharmaceutical industries. Spherical structure is found to be beneficial for catalysis, gas absorption, power density and drug release compared with other structures.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eDue to its small diameter, the pressed sample will have a small part showing non-spherical shape in-between two hemispheres. This part will become non-phenomenal when the diameter increases. Please check the sample images before ordering.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e6 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0115\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 1 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ6 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/sphere_die_01_480x480.png?v=1594938331\" alt=\"\" width=\"384\" height=\"412\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200720202658_480x480.jpg?v=1595302244\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200716154909_480x480.jpg?v=1594939846\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31816573911098,"sku":"PR0115","price":710.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/980_MSE_PRO_6_mm_Diameter_Sphere_Dry_Pellet_Pressing_Die_Set_a4af040b0d.jpg?v=1777693574"},{"product_id":"mse-pro-12-mm-diameter-sphere-dry-pellet-pressing-die-set","title":"MSE PRO 12 mm Diameter Sphere Dry Pellet Pressing Die Set","description":"\u003ch3\u003e12 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 12 mm (~0.5\") diameter sphere dry pellet pressing die set uses pressure to compress powder into 12 mm spherical pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for catalyst, gas absorption, battery, minerals, ceramic, or pharmaceutical industries. Spherical structure is found to be beneficial for catalysis, gas absorption, power density and drug release compared with other structures.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb\u003eDue to its small diameter, the pressed sample will have a small part showing non-spherical shape in-between two hemispheres. This part will become non-phenomenal when the diameter increases. Please check the sample images before ordering.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e12 mm Diameter Sphere Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0116\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 7 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ12 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e1.4kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/sphere_die_01_480x480.png?v=1594938331\" alt=\"\" width=\"384\" height=\"412\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200720202658_480x480.jpg?v=1595302244\" alt=\"\" width=\"417\" height=\"556\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20200716154909_480x480.jpg?v=1594939846\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31816663892026,"sku":"PR0116","price":732.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/981_MSE_PRO_12_mm_Diameter_Sphere_Dry_Pellet_Pressing_Die_Set_9b6d33e96e.jpg?v=1777693602"},{"product_id":"mse-pro-ring-shaped-dry-pellet-pressing-die-set","title":"MSE PRO Ring Shaped Dry Pellet Pressing Die Set","description":"\u003ch3\u003eRing Shaped Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe ring shaped dry pellet pressing die set uses pressure to compress powder into pellets with ring shape. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. This die set is commonly used to prepare pellets for catalysis industry. Other common uses can be found in gas absorption, battery, minerals, ceramic, or pharmaceutical industries. \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eRing Shaped Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePR0117 (dia. 7-3mm), PR0118 (dia. 10-5mm), PR0119 (dia. 20-10mm)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eStainless steel: 440C\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eSample size (OD-ID)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eΦ7-3mm, Φ10-5mm, Φ20-10mm (Other sizes can be customized upon request)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressing force\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eΦ7-3mm (max. 2.5 Tons),  Φ10-5mm (max. 4 Tons), Φ20-10mm (max. 10 Tons )\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eCavity depth (\u003cem\u003eN\u003c\/em\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e40mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eDimensions (\u003cem\u003eLxH\u003c\/em\u003e)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eΦ53x120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e2kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Ring01_480x480.png?v=1595282737\" alt=\"\"\u003e\u003c\/p\u003e\n \n\u003cp\u003e\u003cstrong\u003eDie Operation Guidance:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/ring04_480x480.png?v=1595283194\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/ring03_480x480.png?v=1595282907\" alt=\"\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Φ7-3mm","offer_id":31826830852154,"sku":"PR0117","price":692.95,"currency_code":"USD","in_stock":true},{"title":"Φ10-5mm","offer_id":31826830884922,"sku":"PR0118","price":714.95,"currency_code":"USD","in_stock":true},{"title":"Φ20-10mm","offer_id":31826830917690,"sku":"PR0119","price":758.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/988_MSE_PRO_Ring_Shaped_Dry_Pellet_Pressing_Die_Set_0ab5a52e42.jpg?v=1777693766"},{"product_id":"mse-pro-6x3-mm-rectangular-dry-pellet-pressing-die-set","title":"MSE PRO 6x3 mm Rectangular Dry Pellet Pressing Die Set","description":"\u003ch2\u003e6x3 mm Rectangular Dry Pellet Pressing Die Set\u003c\/h2\u003e\n\u003cp\u003eThe 6x3 mm rectangular dry pellet pressing die set uses pressure to compress powder into pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. Typical uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther rectangular sizes or square sizes are available upon request.\u003c\/strong\u003e  Please contact us for a quote.  \u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e6x3 mm Rectangular Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0120\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 0.5T metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e6x3mm or other customized sizes\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x93\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.65kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"368\" width=\"405\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Rectangular_01_480x480.png?v=1595435033\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31832217092154,"sku":"PR0120","price":527.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/990_MSE_PRO_6x3_mm_Rectangular_Dry_Pellet_Pressing_Die_Set_a4fb488418.jpg?v=1777693820"},{"product_id":"mse-pro-15-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 15 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e15 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 15 mm diameter dry pellet pressing die set uses pressure to compress powder into 15 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0121\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 15 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 14 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868459450426,"sku":"PR0121","price":380.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1010_MSE_PRO_15_mm_Diameter_Dry_Pellet_Pressing_Die_Set_f95d0dcf97.jpg?v=1777694324"},{"product_id":"mse-pro-20-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 20 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e20 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 20 mm diameter dry pellet pressing die set uses pressure to compress powder into 20 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cb style=\"color: #ff2a00;\"\u003eWe don't \u003c\/b\u003e\u003cspan color=\"#ff2a00\" style=\"color: #ff2a00;\"\u003e\u003cb\u003erecommend\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #ff2a00;\"\u003e to use this pressing die set to press\u003cstrong data-mce-fragment=\"1\"\u003e hard powder with size\u003c\/strong\u003e of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/b\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0122\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 20 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 25 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868487467066,"sku":"PR0122","price":425.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1011_MSE_PRO_20_mm_Diameter_Dry_Pellet_Pressing_Die_Set_b9d3730198.jpg?v=1777694352"},{"product_id":"mse-pro-30-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 30 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e30 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 30 mm diameter dry pellet pressing die set uses pressure to compress powder into 30 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0123\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 30 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 56 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\" alt=\"\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868490448954,"sku":"PR0123","price":527.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1012_MSE_PRO_30_mm_Diameter_Dry_Pellet_Pressing_Die_Set_ae15bc997a.jpg?v=1777694381"},{"product_id":"mse-pro-40-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 40 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e40 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 40 mm diameter dry pellet pressing die set uses pressure to compress powder into 40 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0124\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 40 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 100 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31868538388538,"sku":"PR0124","price":604.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1013_MSE_PRO_40_mm_Diameter_Dry_Pellet_Pressing_Die_Set_233d209998.jpg?v=1777694412"},{"product_id":"mse-pro-0-4-10-mm-diameter-tungsten-carbide-dry-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Tungsten Carbide Dry Pellet Pressing Die Set","description":"\u003ch2\u003e0.4\" (10 mm) Diameter Tungsten Carbide Dry Pellet Pressing Die Set\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe 0.4\" (10 mm) diameter dry pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness, corrosion resistant and wear resistant tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. Common uses for tungsten carbide dry pellet pressing dies include making laboratory pellets in minerals, ceramics, pharmaceutical or analytical sample preparations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" data-mce-href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe offer customization service on pressing die sets. Please contact us at sales@msesupplies.com to discuss.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0125\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt; 85\u003c\/li\u003e\n\u003cli\u003eMaterial: Tungsten carbide\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" data-mce-style=\"float: none;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31882942742586,"sku":"PR0125","price":853.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1023_MSE_PRO_0_4_10_mm_Diameter_Tungsten_Carbide_Dry_Pellet_Pressing_Die_Set_85a1afdd87.jpg?v=1777694702"},{"product_id":"mse-pro-10x10-mm-square-dry-pellet-pressing-die-set","title":"MSE PRO 10x10 mm Square Dry Pellet Pressing Die Set","description":"\u003ch3\u003e10x10 mm Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 10X10 mm square dry pellet pressing die set uses pressure to compress powder into cuboid pellet. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe offer customization service on pressing die set. Please contact us at sales@msesupplies.com to discuss.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003e\u003cstrong\u003eProduct\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003ch3\u003e10x10 mm Square Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSKU#\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003ePR0127\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDie material\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eAlloy steel: Cr12MoV\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003ePressing Force:\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\u003cspan\u003emaximum 6 metric Ton\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eHardness\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eHRC60-HRC62\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eSample size (M)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e10x10 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eCavity depth (N)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e20mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eDimensions (LxH)\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003eΦ43x93\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd width=\"281\"\u003e\n\u003cp\u003eWeight\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd width=\"342\"\u003e\n\u003cp\u003e0.65kg\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"368\" width=\"405\" alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_03_480x480.png?v=1594765189\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDie Operation Guide:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/square_480x480.png?v=1595269167\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/6X6_mm_01_480x480.png?v=1594764751\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31883118182458,"sku":"PR0127","price":593.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1024_MSE_PRO_10x10_mm_Square_Dry_Pellet_Pressing_Die_Set_61153b531b.jpg?v=1777694731"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-tungsten-carbide-dry-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Tungsten Carbide Dry Pellet Pressing Die Set","description":"\u003ch2\u003e0.5\" (12.7 mm) Diameter Tungsten Carbide Dry Pellet Pressing Die Set\u003c\/h2\u003e\n\u003cp\u003eThe 0.5\" (12.7 mm) diameter dry pellet pressing die set uses pressure to compress powder into 0.5\" pellets. The die is made from high quality, high hardness, corrosion resistant and wear resistant tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cspan\u003eCommon uses for tungsten carbide dry pellet pressing dies include making laboratory pellets in minerals, ceramics, pharmaceutical or analytical sample preparations.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe offer customization service on pressing die sets. Please contact us at sales@msesupplies.com to discuss.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0126\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.5\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt; 85\u003c\/li\u003e\n\u003cli\u003eMaterial: Tungsten carbide\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31883191713850,"sku":"PR0126","price":1095.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1025_MSE_PRO_0_5_12_7_mm_Diameter_Tungsten_Carbide_Dry_Pellet_Pressing_Die_Set_8b81a40b62.jpg?v=1777694760"},{"product_id":"mse-pro-18-mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 18 mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e18 mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 18 mm diameter dry pellet pressing die set uses pressure to compress powder into 18 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets for infrared spectroscopy measurement, coin cell electrode preparation and catalyst research. Additional uses for laboratory pellets can be found in the minerals, ceramic or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press hard powder with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pressing-die-accessories-and-replacement\" target=\"_blank\"\u003e\u003cem\u003e\u003cstrong\u003eClick here to order the spacer and anvil replacements.\u003c\/strong\u003e\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0128\u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 18 mm\u003c\/li\u003e\n\u003cli\u003eCore Height: 40 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 20 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":31905840955450,"sku":"PR0128","price":424.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1044_MSE_PRO_18_mm_Diameter_Dry_Pellet_Pressing_Die_Set_6c856aa053.jpg?v=1777695273"},{"product_id":"mse-pro-16-mm-diameter-tungsten-carbide-dry-pellet-pressing-die-set","title":"MSE PRO 16 mm Diameter Tungsten Carbide Dry Pellet Pressing Die Set","description":"\u003ch2\u003e16 mm Diameter Tungsten Carbide Dry Pellet Pressing Die Set\u003c\/h2\u003e\n\u003cp\u003eThe 16 mm diameter dry pellet pressing die set uses pressure to compress powder into 16 mm pellets. The die is made from high quality, high hardness, corrosion resistant and wear resistant tungsten carbide, which ensures a successful compression of both ceramic and metal powders into pellet form. \u003cspan\u003eCommon uses for tungsten carbide dry pellet pressing dies include making laboratory pellets in minerals, ceramics, pharmaceutical or analytical sample preparations.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eWe offer customization service on pressing die sets. Please contact us at sales@msesupplies.com to discuss.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0129\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 16 mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 15 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt; 85\u003c\/li\u003e\n\u003cli\u003eMaterial: Tungsten carbide\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_for_operation_480x480.jpg?v=1574842295\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32012412878906,"sku":"PR0129","price":1238.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1161_MSE_PRO_16_mm_Diameter_Tungsten_Carbide_Dry_Pellet_Pressing_Die_Set_3dc420bd44.jpg?v=1777698400"},{"product_id":"mse-pro-0-25-6-35-mm-diameter-split-type-dry-pellet-pressing-die-set","title":"MSE PRO 0.25\" (6.35 mm) Diameter Split Type Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.25\" (6.35 mm) Diameter Split Type Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThis unique split design dry pellet pressing die set has the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt makes sample releasing from the mould easy\u003c\/li\u003e\n\u003cli\u003eIt minimizes the risk of breaking the pellet during the demoulding process\u003c\/li\u003e\n\u003cli\u003eIt is ideal for pressing ultra fine powders or sticky materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 0.25\" diameter dry pellet pressing die set uses pressure to compress powder into 0.25\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of split type pellet pressing die sets is to create pellets of minerals, ceramics, metals or pharmaceutical powders.\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0130\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.25\" (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 2 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 68-70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20201013181519_480x480.jpg?v=1602638148\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Split_type_press_02_480x480.png?v=1602638313\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32071049871418,"sku":"PR0130","price":637.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1192_MSE_PRO_0_25_6_35_mm_Diameter_Split_Type_Dry_Pellet_Pressing_Die_Set_f572310be0.jpg?v=1777699236"},{"product_id":"mse-pro-0-4-10-mm-diameter-split-type-dry-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Split Type Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.4\" (10 mm) Diameter Split Type Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThis unique split design dry pellet pressing die set has the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt makes sample releasing from the mould easy\u003c\/li\u003e\n\u003cli\u003eIt minimizes the risk of breaking the pellet during the demoulding process\u003c\/li\u003e\n\u003cli\u003eIt is ideal for pressing ultra fine powders or sticky materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 0.4\" diameter dry pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of split type pellet pressing die sets is to create pellets of minerals, ceramics, metals or pharmaceutical powders.\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0131 \u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 68-70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20201013181519_480x480.jpg?v=1602638148\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Split_type_press_02_480x480.png?v=1602638313\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32071163641914,"sku":"PR0131","price":692.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1193_MSE_PRO_0_4_10_mm_Diameter_Split_Type_Dry_Pellet_Pressing_Die_Set_966595a8a4.jpg?v=1777699263"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-split-type-dry-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Split Type Dry Pellet Pressing Die Set","description":"\u003ch3\u003e0.5\" (12.7 mm) Diameter Split Type Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThis unique split design dry pellet pressing die set has the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt makes sample releasing from the mould easy\u003c\/li\u003e\n\u003cli\u003eIt minimizes the risk of breaking the pellet during the demoulding process\u003c\/li\u003e\n\u003cli\u003eIt is ideal for pressing ultra fine powders or sticky materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 0.5\" (12.7 mm) diameter dry pellet pressing die set uses pressure to compress powder into 0.5\" (12.7 mm) pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of split type pellet pressing die sets is to create pellets of minerals, ceramics, metals or pharmaceutical powders.\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0132 \u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 0.5\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 40 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH): 68x110 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 68-70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20201013181519_480x480.jpg?v=1602638148\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Split_type_press_02_480x480.png?v=1602638313\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32071169048634,"sku":"PR0132","price":736.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1194_MSE_PRO_0_5_12_7_mm_Diameter_Split_Type_Dry_Pellet_Pressing_Die_Set_7993ea0bae.jpg?v=1777699290"},{"product_id":"mse-pro-1-25-4-mm-diameter-split-type-dry-pellet-pressing-die-set","title":"MSE PRO 1\" (25.4 mm) Diameter Split Type Dry Pellet Pressing Die Set","description":"\u003ch3\u003eMSE PRO\u003csup\u003eTM\u003c\/sup\u003e 1\" (25.4 mm) Diameter Split Type Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThis unique split design dry pellet pressing die set has the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt makes sample releasing from the mould easy\u003c\/li\u003e\n\u003cli\u003eIt minimizes the risk of breaking the pellet during the demoulding process\u003c\/li\u003e\n\u003cli\u003eIt is ideal for pressing ultra fine powders or sticky materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 1\" (25.4 mm) diameter dry pellet pressing die set uses pressure to compress powder into 1\" (25.4 mm) pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of split type pellet pressing die sets is to create pellets of minerals, ceramics, metals or pharmaceutical powders.\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0133\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 1\" (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eCore Depth: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 68-70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20201013181519_480x480.jpg?v=1602638148\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Split_type_press_02_480x480.png?v=1602638313\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32071176093754,"sku":"PR0133","price":978.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/products\/PR0133a_1.jpg?v=1752256008"},{"product_id":"mse-pro-3mm-diameter-dry-pellet-pressing-die-set","title":"MSE PRO 3mm Diameter Dry Pellet Pressing Die Set","description":"\u003ch3\u003e3mm Diameter Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 3mm diameter dry pellet pressing die set uses pressure to compress powder into 3mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of pellet pressing die sets is to create pellets of potassium bromide (KBr) for use in infrared spectroscopy. Additional uses for laboratory pellets can be found in the minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damage the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0134 \u003c\/li\u003e\n\u003cli\u003eSet Includes: 1 Die Sleeve, 1 Plunger Rod, 1 Base Plate, 1 Release Ring, and 2 Spacers\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 3mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 20 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 0.5 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc \u0026gt;60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/powder_pressing_die_schematic_480x480.jpg?v=1597333590\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":32081846370362,"sku":"PR0134","price":373.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1200_MSE_PRO_3mm_Diameter_Dry_Pellet_Pressing_Die_Set_d6ea9d3a34.jpg?v=1777699433"},{"product_id":"mse-pro-30-mm-diameter-split-type-dry-pellet-pressing-die-set","title":"MSE PRO 30 mm Diameter Split Type Dry Pellet Pressing Die Set","description":"\u003ch3\u003e30 mm Diameter Split Type Dry Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThis unique split design dry pellet pressing die set has the following benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIt makes sample releasing from the mould easy\u003c\/li\u003e\n\u003cli\u003eIt minimizes the risk of breaking the pellet during the demoulding process\u003c\/li\u003e\n\u003cli\u003eIt is ideal for pressing ultra fine powders or sticky materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 30 mm diameter dry pellet pressing die set uses pressure to compress powder into 30 mm pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. A common use of split type pellet pressing die sets is to create pellets of minerals, ceramics, metals or pharmaceutical powders.\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0140\u003c\/li\u003e\n\u003cli\u003eCore Diameter (ID): 30 mm\u003c\/li\u003e\n\u003cli\u003eCore Depth: 45 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 56 metric Ton\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 68-70\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/WeChat_Image_20201013181519_480x480.jpg?v=1602638148\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Split_type_press_02_480x480.png?v=1602638313\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39253357330490,"sku":"PR0140","price":1073.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1312_MSE_PRO_30_mm_Diameter_Split_Type_Dry_Pellet_Pressing_Die_Set_98c5e41e23.jpg?v=1777702386"},{"product_id":"mse-pro-lab-scale-small-3-ton-manual-hydraulic-pellet-press-with-digital-display","title":"MSE PRO Lab Scale Small 3-Ton Manual Hydraulic Pellet Press","description":"\u003ch2\u003eMSE PRO™ Lab Scale Small 3-Ton Manual Hydraulic Pellet Press\u003c\/h2\u003e\n\u003cp\u003eOur lab scale small 3-Ton manual hydraulic pellet press has unique features such as compact structure, small volume, fast compression, simple operation, easy cleaning and low maintenance. It is widely used to press powders into pellets for FTIR\/XRF analysis, battery electrode material, \u003cspan data-mce-fragment=\"1\"\u003emetallurgy, ceramic and catalysis applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAt MSE Supplies, we are experts at powder processing materials, ball milling equipment and accessories. We offer a variety of \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003eball mill and jars\u003c\/a\u003e to break down the particle size before the pressing. We also supply \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies\" target=\"_blank\"\u003epellet pressing dies\u003c\/a\u003e which are compatible with this press for pellet pressing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003eIf you need other maximum pressure or customized design, please contact MSE Supplies. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem\u003e\u003cstrong\u003eIf you use this press inside of glove box, please check the O-ring seal periodically to avoid oil leak. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col start=\"2\"\u003e\u003c\/ol\u003e\n\u003ctable width=\"663\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct SKU #\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eRegular Pressure Gauge PR0301A\u003c\/p\u003e\n\u003cp\u003eDigital Pressure Gauge PR0301\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure range\u003c\/td\u003e\n\u003ctd\u003e0-3 Tons (28.8 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax pressure\u003c\/td\u003e\n\u003ctd\u003e3 Metric Tons\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure stability\u003c\/td\u003e\n\u003ctd\u003e≤1MPa\/10min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLead screw diameter\u003c\/td\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample stage diameter\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum sample height\u003c\/td\u003e\n\u003ctd\u003e130mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e225mm x 155mm x 380 mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e28kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited one year warranty, not responsible for the damage caused by improper use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNote\u003c\/td\u003e\n\u003ctd\u003ePlease clean the press after each use to ensure the best performance and longer life time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3t_PRESS_480x480.png?v=1615845518\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/3t_PRESS_480x480.png?v=1615845518\" data-mce-fragment=\"1\"\u003e","brand":"MSE Supplies","offers":[{"title":"Regular Pressure Gauge","offer_id":40275011174458,"sku":"PR0301A","price":1535.95,"currency_code":"USD","in_stock":true},{"title":"Digital Pressure Gauge","offer_id":40275011207226,"sku":"PR0301","price":1865.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1327_MSE_PRO_Lab_Scale_Small_3-Ton_Manual_Hydraulic_Pellet_Press_4d1ce48228.jpg?v=1777702777"},{"product_id":"mse-pro-lab-scale-24-ton-manual-hydraulic-pellet-press-with-safety-shield","title":"MSE PRO Lab Scale 24-Ton Manual Hydraulic Pellet Press with Safety Shield","description":"\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOur lab scale 24-Ton manual hydraulic pellet press has unique features such as compact structure, small volume, fast compression, simple operation, easy cleaning and low maintenance. It is widely used to press powders for FTIR\/XRF analysis, battery electrode material, \u003cspan data-mce-fragment=\"1\"\u003emetallurgy, ceramic and catalysis applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAt MSE Supplies, we are experts at powder processing materials, ball milling equipment and accessories. We offer a variety of \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003eball mill and jars\u003c\/a\u003e to break down the particle size before the pressing. We also supply \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies\" target=\"_blank\"\u003epellet pressing dies\u003c\/a\u003e which are compatible with this press for pellet pressing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you need other maximum pressure requirements or customized designs, please contact MSE Supplies.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIf you use this press inside a glove box, please check the O-ring seal periodically to avoid oil leak. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003col start=\"2\"\u003e\u003c\/ol\u003e\n\u003ctable width=\"663\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct SKU #\u003c\/td\u003e\n\u003ctd\u003ePR0302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure range\u003c\/td\u003e\n\u003ctd\u003e0-24 Metric Tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax pressure\u003c\/td\u003e\n\u003ctd\u003e24 Tons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter of piston\u003c\/td\u003e\n\u003ctd\u003e95mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum travel distance of the piston\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure stability\u003c\/td\u003e\n\u003ctd\u003e≤1 MPa\/10min\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample stage diameter\u003c\/td\u003e\n\u003ctd\u003e105mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area\u003c\/td\u003e\n\u003ctd\u003e80mm x 150mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003clabel data-spm-anchor-id=\"a2700.details.pronpeci14.i2.60af57b4rN8P5o\"\u003e\u003c\/label\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e245mm x 175mm x 415 mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e65 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety shield\u003c\/td\u003e\n\u003ctd\u003ePolycarbonate safety shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited one year warranty, not responsible for the damage caused by improper use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNote\u003c\/td\u003e\n\u003ctd\u003ePlease clean the press after each use to ensure the best performance and longer life time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/24T_PRESS_480x480.jpg?v=1615845190\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/24T_PRESS_480x480.jpg?v=1615845190\"\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39267246932026,"sku":"PR0302","price":2195.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1329_MSE_PRO_Lab_Scale_24-Ton_Manual_Hydraulic_Pellet_Press_with_Safety_Shield_d299e620db.jpg?v=1777702833"},{"product_id":"mse-pro-bench-top-automatic-lab-press-with-safety-cover-3","title":"MSE PRO Bench Top Automatic Lab Press with Safety Cover","description":"\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003eA demo unit of PR0303 is available at a lower price. \u003c\/span\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003ePlease \u003ca href=\"https:\/\/www.msesupplies.com\/pages\/contact-us-page\" style=\"color: rgb(255, 42, 0);\"\u003econtact us\u003c\/a\u003e if you are\u003c\/span\u003e \u003cspan style=\"color: rgb(255, 42, 0);\"\u003einterested.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCompared with manual hydraulic press, this bench top automatic lab press offered by MSE Supplies can set and automatically hold the designated pressure for up to \u003cspan\u003e999m59s\u003c\/span\u003e. The upper and lower pressure values can be programmed and automatically controlled by the press itself. The pressure increase rate during pressing is also automatically controlled which will gradually reduces when approaching the designated pressure. With these features, this automatic lab press delivers better pressure control accuracy than manual hydraulic press. Automatic lab pellet presses are widely used to press powders for FTIR\/XRF analysis, battery electrode materials, \u003cspan\u003emetallurgy, ceramic and catalysis applications. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAt MSE Supplies, we are experts at powder processing materials, ball milling equipment and accessories. We offer a variety of \u003cstrong\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003eball mill and jars\u003c\/a\u003e\u003c\/strong\u003e or \u003cstrong\u003e\u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e\u003c\/strong\u003e to break down the particle size before the pressing. We also supply \u003cstrong\u003e\u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies\" target=\"_blank\"\u003epellet pressing dies\u003c\/a\u003e\u003c\/strong\u003e which are compatible with this automatic lab press for pellet pressing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eIf you need other maximum pressure requirements or customized designs, please contact MSE Supplies.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"2\"\u003e\u003c\/ol\u003e\n\u003ctable width=\"663\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct SKU #\u003c\/td\u003e\n\u003ctd\u003ePR0303\u003c\/td\u003e\n\u003ctd\u003ePR0304\u003c\/td\u003e\n\u003ctd\u003ePR0305\u003c\/td\u003e\n\u003ctd\u003ePR0306\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure range\u003c\/td\u003e\n\u003ctd\u003e0-20T\u003c\/td\u003e\n\u003ctd\u003e0-30T\u003c\/td\u003e\n\u003ctd\u003e0-40T\u003c\/td\u003e\n\u003ctd\u003e0-60T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure hold time\u003c\/td\u003e\n\u003ctd\u003e0-999m59s\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0-999m59s\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0-999m59s\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e0-999m59s\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLCD display\u003c\/td\u003e\n\u003ctd\u003e4.3\"\u003c\/td\u003e\n\u003ctd\u003e4.3\"\u003c\/td\u003e\n\u003ctd\u003e4.3\"\u003c\/td\u003e\n\u003ctd\u003e4.3\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety feature\u003c\/td\u003e\n\u003ctd\u003ePlexiglass safety cover \u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePlexiglass safety cover\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003ePlexiglass safety cover\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e\u003cspan\u003ePlexiglass safety cover\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSample stage travel distance (T)\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003ctd\u003e30mm\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003ctd\u003e50mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking area (MxN)\u003c\/td\u003e\n\u003ctd\u003e140mm x 160mm\u003c\/td\u003e\n\u003ctd\u003e140mm x 160mm\u003c\/td\u003e\n\u003ctd\u003e175mm x 180mm\u003c\/td\u003e\n\u003ctd\u003e185mm x 220 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (LxWxH)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\n\u003cspan\u003e\u003clabel data-spm-anchor-id=\"a2700.details.pronpeci14.i2.60af57b4rN8P5o\"\u003e\u003c\/label\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e230mm x 390mm x 420 mm\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e230mm x 390mm x 420 mm\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e280mm x 460 mm x 550mm\u003c\/td\u003e\n\u003ctd\u003e300mm x 520 mm x 580 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e110V\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e110V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e110V\u003c\/span\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e110V\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e65kg\u003c\/td\u003e\n\u003ctd\u003e95kg\u003c\/td\u003e\n\u003ctd\u003e150kg\u003c\/td\u003e\n\u003ctd\u003e180kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eLimited one year warranty, excluding damages caused by improper use. \u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003ePlease clean the press after each use to ensure the best performance and longer life time.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/press_03_480x480.png?v=1617989529\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"20T","offer_id":41014806544442,"sku":"PR0303","price":4395.95,"currency_code":"USD","in_stock":true},{"title":"30T","offer_id":41014806675514,"sku":"PR0304","price":5495.95,"currency_code":"USD","in_stock":true},{"title":"40T","offer_id":41014807167034,"sku":"PR0305","price":7145.95,"currency_code":"USD","in_stock":true},{"title":"60T","offer_id":41014807298106,"sku":"PR0306","price":9125.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1356_MSE_PRO_Bench_Top_Automatic_Lab_Press_with_Safety_Cover_7dd42aa4f9.jpg?v=1777703467"},{"product_id":"mse-pro-0-25-6-35-mm-diameter-heating-up-to-300-c-pellet-pressing-die-set","title":"MSE PRO 0.25\" (6.35 mm) Diameter Heating (up to 300 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.25\" (6.35 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.25\" diameter heating pellet pressing die set uses pressure to compress powder into 0.25\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003eThe \u003cspan data-mce-fragment=\"1\"\u003eheating pellet pressing die set\u003c\/span\u003e is ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 500\u003cspan data-mce-fragment=\"1\"\u003e° C\u003c\/span\u003e available. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" data-mce-href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" data-mce-href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\" data-mce-style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0143 \u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.25\" (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH): 78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 2 metric Ton at room temperature (reduced to 1T when heated) \u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 220V\/300W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39297809285178,"sku":"PR0143","price":1623.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1357_MSE_PRO_0_25_6_35_mm_Diameter_Heating_up_to_300_C_Pellet_Pressing_Die_Set_49ae0eacb2.jpg?v=1777703495"},{"product_id":"mse-pro-0-4-10-mm-diameter-heating-up-to-300-c-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Heating (up to 300 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.4\" (10 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.4\" diameter heating pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e is ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 500 ℃ available. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0144 \u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton at room temperature (reduced to 3T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 220V\/300W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39301657002042,"sku":"PR0144","price":1843.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1359_MSE_PRO_0_4_10_mm_Diameter_Heating_up_to_300_C_Pellet_Pressing_Die_Set_49ae0eacb2.jpg?v=1777703549"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-heating-up-to-300-c-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Heating (up to 300 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.5\" (12.7 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.5\" diameter heating pellet pressing die set uses pressure to compress powder into 0.5\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e available. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0145\u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.5\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton at room temperature (reduced to 5T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 110V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39301775884346,"sku":"PR0145","price":1953.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1360_MSE_PRO_0_5_12_7_mm_Diameter_Heating_up_to_300_C_Pellet_Pressing_Die_Set_49ae0eacb2.jpg?v=1777703577"},{"product_id":"mse-pro-1-25-4-mm-diameter-heating-up-to-300-c-pellet-pressing-die-set","title":"MSE PRO 1\" (25.4 mm) Diameter Heating (up to 300 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e1\" (25.4 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 1\" diameter heating pellet pressing die set uses pressure to compress powder into 1\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e available. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0146\u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 1\" (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  90x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton at room temperature (reduced to 19T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 110V \u003cstrong\u003e(Recent launch)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39302641156154,"sku":"PR0146","price":2173.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1361_MSE_PRO_1_25_4_mm_Diameter_Heating_up_to_300_C_Pellet_Pressing_Die_Set_49ae0eacb2.jpg?v=1777703604"},{"product_id":"mse-pro-0-25-6-35-mm-diameter-heating-up-to-500-c-pellet-pressing-die-set","title":"MSE PRO 0.25\" (6.35 mm) Diameter Heating (up to 500 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.25\" (6.35 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.25\" diameter heating pellet pressing die set uses pressure to compress powder into 0.25\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 300\u003cspan data-mce-fragment=\"1\"\u003e° C\u003c\/span\u003e available at lower cost. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0147 \u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.25\" (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH): 78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 2 metric Ton at room temperature (reduced to 1T when heated) \u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 110V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39302836551738,"sku":"PR0147","price":1926.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1362_MSE_PRO_0_25_6_35_mm_Diameter_Heating_up_to_500_C_Pellet_Pressing_Die_Set_f0626ffd02.jpg?v=1777703631"},{"product_id":"mse-pro-0-4-10-mm-diameter-heating-up-to-500-c-pellet-pressing-die-set","title":"MSE PRO 0.4\" (10 mm) Diameter Heating (up to 500 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.4\" (10 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.4\" diameter heating pellet pressing die set uses pressure to compress powder into 0.4\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 300 ℃ available at lower cost. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca title=\"Powder Processing Ball Milling\" href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca title=\"Agate Mortar \u0026amp; Pestle\" href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0148 \u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.4\" (10 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 6 metric Ton at room temperature (reduced to 3T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 110V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg alt=\"Pressing Die Set Pressing Force and Pressure Conversion\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39302846578746,"sku":"PR0148","price":2146.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1363_MSE_PRO_0_4_10_mm_Diameter_Heating_up_to_500_C_Pellet_Pressing_Die_Set_189086443b.jpg?v=1777703659"},{"product_id":"mse-pro-0-5-12-7-mm-diameter-heating-up-to-500-c-pellet-pressing-die-set","title":"MSE PRO 0.5\" (12.7 mm) Diameter Heating (up to 500 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e0.5\" (12.7 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 0.5\" diameter heating pellet pressing die set uses pressure to compress powder into 0.5\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e available at lower cost. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 50 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0149\u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 0.5\" (12.7 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  78x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 10 metric Ton at room temperature (reduced to 5T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 220V\/300W (New version will be 110V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39302935543866,"sku":"PR0149","price":2366.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1364_MSE_PRO_0_5_12_7_mm_Diameter_Heating_up_to_500_C_Pellet_Pressing_Die_Set_68e73b38f7.jpg?v=1777703686"},{"product_id":"mse-pro-1-25-4-mm-diameter-heating-up-to-500-c-pellet-pressing-die-set","title":"MSE PRO 1\" (25.4 mm) Diameter Heating (up to 500 °C) Pellet Pressing Die Set","description":"\u003ch3\u003e1\" (25.4 mm) Diameter Heating Pellet Pressing Die Set\u003c\/h3\u003e\n\u003cp\u003eThe 1\" diameter heating pellet pressing die set uses pressure to compress powder into 1\" pellets. The die is made from high quality, high hardness carbon steel, which ensures a successful compression of both ceramic and metal powders into pellet form. The pressing die can be heated up to 500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e with a heating rate of 5-10 ℃\/min.\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe heating pellet pressing die set\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eis ideal for pressing the powders which are sensitive to temperature, such as polymer, resin and easy phase transition chemicals. Additional uses for laboratory pellets can be found in the battery research, minerals, ceramic, or pharmaceutical industries.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eThe cooling stage is optional with additional cost. We also have heating pressing dies which can be heated up to 300 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e available at lower cost. Other diameters or geometries are customizable upon request.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn order to grind the desired materials into the correct granularity of powder (from millimeters to microns), we recommend using either our \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" title=\"Powder Processing Ball Milling\" target=\"_blank\"\u003epowder processing ball milling products \u0026amp; accessories\u003c\/a\u003e or our \u003ca href=\"https:\/\/www.msesupplies.com\/products\/agate-mortar-pestle-set?variant=31019306483770\" title=\"Agate Mortar \u0026amp; Pestle\" target=\"_blank\"\u003eagate mortar \u0026amp; pestle sets\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003eWe don't recommend to use this pressing die set to press particle with size of 100 microns or smaller. Small particles may slip into the gap of the die parts and damages the sleeve during the compression. MSE Supplies is not responsible for the damage caused by improper use.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTo avoid rust, store the pressing die set in a dry environment and clean after each use. If you do not intend to use for an extended period of time, it is recommended to apply some oil on the pressing die surfaces to avoid the formation of rust. MSE Supplies is not responsible for rust or damage caused by improper use. Please inspect the pressing die upon arrival. Pressing dies are considered consumables, the warranty only covers manufacturing defects.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cem\u003ePressing die is considered as consumables which is not covered by warranty.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eProduct #: PR0150\u003c\/li\u003e\n\u003cli\u003eSet Includes: pressing die, heating unit and temperature controller\u003c\/li\u003e\n\u003cli\u003eCore Diameter (M): 1\" (25.4 mm)\u003c\/li\u003e\n\u003cli\u003eHeating range: 0-500 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eCore Depth (N): 45 mm\u003c\/li\u003e\n\u003cli\u003eDimensions (LxH):  90x138 mm\u003c\/li\u003e\n\u003cli\u003ePressing Force: maximum 39 metric Ton at room temperature (reduced to 19T when heated)\u003c\/li\u003e\n\u003cli\u003ePressing Pressure: Less than 800 MPa (116 kPSI) is recommended, maximum 1200 MPa (174 kPSI)\u003c\/li\u003e\n\u003cli\u003eRockwell Hardness: Rc 60-62\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Hardened alloy steel, AISI D2 tool steel, equivalent to JIS SKD11 steel or GB Cr12MoV steel or DIN.EN 1.2379 steel\u003c\/li\u003e\n\u003cli\u003ePower supply: 110V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_dimensions_480x480.png?v=1618253021\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/300_pressing_die_480x480.png?v=1618252098\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePressing Die Set Pressing Force and Pressure Conversion \u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/Pressing_Die_Set_Pressing_Force_and_Pressure_Conversion.png?v=1584657175\" alt=\"Pressing Die Set Pressing Force and Pressure Conversion\"\u003e\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"MSE Supplies","offers":[{"title":"Default Title","offer_id":39302937575482,"sku":"PR0150","price":2696.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1365_MSE_PRO_1_25_4_mm_Diameter_Heating_up_to_500_C_Pellet_Pressing_Die_Set_c067be8a97.jpg?v=1777703714"},{"product_id":"mse-pro-24-ton-benchtop-heated-lab-press-300-c-with-dual-flat-heating-plates-100x100-mm","title":"MSE PRO 24-Ton Benchtop Heated Lab Press (300°C) with Dual Flat Heating Plates (100x100 mm)","description":"\u003cp\u003e\u003cstrong\u003ePRODUCT SPECIFICATIONS\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cspan data-mce-fragment=\"1\"\u003eMSE PRO™ \u003c\/span\u003ebenchtop 24T manual hydraulic heated lab press is designed for heated pressing of polymer, ceramic powder and electrode\/membrane films. This benchtop heated lab press has two flat heating plates (100 mm x 100 mm), which can be heated up to 300 °C. The heating plate temperatures are individually controlled by two digital temperature controllers, which ensures the precise temperature control. The optional water cooling jackets are installed with the heating plates to allow the heated plates to achieve fast cooling (The water chiller is optional for purchase with additional cost). This benchtop heated lab press also can be used as small laminator for polymer films. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAt MSE Supplies, we are experts at powder processing materials, ball milling equipment and accessories. We offer a variety of \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/powder-processing\" target=\"_blank\"\u003eball mill and jars\u003c\/a\u003e to break down the particle size before the pressing. We also supply \u003ca href=\"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies\" target=\"_blank\"\u003epellet pressing dies\u003c\/a\u003e which are compatible with this press for pellet pressing. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eMSE Supplies can offer heated lab presses with a heating plate size from 100x100 mm to 400x400 mm. We also have heated presses that can be heated up to 5\u003cspan data-mce-fragment=\"1\"\u003e00 °C. P\u003c\/span\u003elease contact MSE Supplies for your heated lab press.\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003col start=\"2\"\u003e\u003c\/ol\u003e\n\u003ctable width=\"663\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003eMSE PRO™\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct SKU #\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003ePR0307 without chiller\u003c\/p\u003e\n\u003cp\u003ePR0308 with chiller\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePressure range\u003c\/td\u003e\n\u003ctd\u003e0-24 Metric Tons (0-34 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating range\u003c\/td\u003e\n\u003ctd\u003eup to \u003cspan data-mce-fragment=\"1\"\u003e300 °C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiameter of piston (d)\u003c\/td\u003e\n\u003ctd\u003e95mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature control accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 \u003cspan data-mce-fragment=\"1\"\u003e°C\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling mode\u003c\/td\u003e\n\u003ctd\u003eWater cooling (Water chiller is optional with additional cost)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating plate (MxN)\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003eDual 100x100 mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum distance between upper and lower plates\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e140mm\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between each two adjacent pillars\u003c\/td\u003e\n\u003ctd\u003e80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHot press dimension (KxPxH)\u003c\/td\u003e\n\u003ctd\u003e\u003cspan\u003e245mm x 175mm x 500mm\u003c\/span\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall dimension including the optional chiller (LxWxH)\u003c\/td\u003e\n\u003ctd\u003e800mm x 470mm x 500mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet weight\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp\u003e64kg without chiller\u003c\/p\u003e\n\u003cp\u003e90kg with chiller\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e110V\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eLimited one year warranty, excluding damages caused by improper use\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNote\u003c\/td\u003e\n\u003ctd\u003ePlease clean the press after each use to ensure the best performance and longer life time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/PR0307-00_With_Labels.png?v=1715282251\" width=\"701\" height=\"466\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/24T_PRESS_480x480.jpg?v=1615845190\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/24T_PRESS_480x480.jpg?v=1615845190\"\u003e\u003c\/p\u003e","brand":"MSE Supplies","offers":[{"title":"Dual 100x100 mm Heating Plates without Chiller","offer_id":39306214342714,"sku":"PR0307","price":3955.95,"currency_code":"USD","in_stock":true},{"title":"Dual 100x100 mm Heating Plates with Chiller","offer_id":39306214375482,"sku":"PR0308","price":4945.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/files\/1366_MSE_PRO_24-Ton_Benchtop_Heated_Lab_Press_300_C_with_Dual_Flat_Heating_Plates_100_acea653701.jpg?v=1777703741"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0722\/7785\/collections\/Pellet-Press-Die-Steel_1625d936-a618-448e-9cc9-f7d4c3b05298.jpg?v=1769048864","url":"https:\/\/www.msesupplies.com\/collections\/pellet-pressing-dies-and-press\/pellet-pressing-dies-and-press.oembed","provider":"MSE Supplies","version":"1.0","type":"link"}