Portable Type Lab Potentiostat, Galvanostat for Electrochemical Measurement

MSE Supplies offers a compact standing-alone electrolyzing unit, integrating a potentiostat and a galvanostat which are indispensable for electrochemical measurement.

The potentiostat /galvanostat part, has sufficient functions for normal electrolytic testing and corrosion testing. This part is equipped with three major functions: high-input-impedance electrometer, potentiostat (constant-voltage control) and galvanostat(constant-current control).

The potentiostat/galvanostat part is provided also with alarm functions for uncontrollableness, excess voltage and excess current as well as additional convenient functions, including external control input and current-monitor noise refection filter.

Made in Japan.

Specifications:

Potentiostat
Maximum output	±15V, ±1A
Current detection ranges	6 ranges of ±1A, ±100mA, ±10mA, ±1mA, ±100uA, ±10uA
Maximum control voltage	±10V
Control tolerance	±3mV
Response speed	50usec and less
Input resistance	10¹⁰Ω and more
Galvanostat
Maximum output	±1A, ±15V
Set current ranges	6 ranges of ±1A, ±100mA, ±10mA, ±1mA, ±100uA, ±10uA
Current set-up accuracy	No more than 1% of the set current range full scale
Response speed	50usec and less
Electrometer
Input resistance	10¹⁰Ω and more
Bias current	10^-10Ω and more
Response speed	10usec and less
Conversion error	No more than 0.1% of the input voltage
Voltage display ranges	2 ranges of ±10V and ±2V (digital display)
Recording portion
Voltage record output	1:1
Current record output	Full scale of each current range is converted into 1V
General
Current consumption	20VA at standby 100VA under maximum load
External dimensions	W215×D200×H100mm
Power supply	115V AC, 50/60Hz
Weight	7.7kg