Product Details:

Neware CT-9004-5V5A high precision battery testing system has lots of features, such as 4 channels, 0.02% accuracy, 1000Hz data acquisition frequency, 4 current range, supporting GSM and CDMA. The current accuracy is as high as ±30nA. It has 4 channels which have independent constant-current and constant-voltage source, programmed and controlled by computer software. It is widely used for high precision electrochemical performance test on coin cell, cylindrical cell and pouch cell in battery R&D and manufacturing lab.

Product Features:

Four current ranges: 0.1μA-150μA, 150μA-5mA, 5mA-150mA and 150mA-5A
Accuracy:±0.02% FS
Current response time: ≤100μS
Minimum plus width: 100μS
Data acquisition frequency: 1000Hz

For bulk orders (≥5 sets), we can offer a complimentary rack to hold multiple units. Please contact MSE Supplies for bulk orders.

About Neware

Since 1998, Neware has been committed to providing world-class testing solutions for the batteries and capacitors. Neware has provided flexible, high accuracy battery testing equipment to more than 32,000 customers worldwide ranging from battery manufacturers to R&D institutes, such as Argonne National Lab, LG Chem, Johnson Matthey, 3M, MIT, Stanford University and Princeton University. Customers are satisficed with stable, cost-effective battery testing equipment, along with the great service of Neware. ISO9001:2015 certified,

MSE Supplies is an authorized distributor of Neware in the USA. The product figure is for reference only. The actual product may look different based on the product configuration.

MSE Supplies is a US-based leading supplier of battery research materials and equipment with thousands of customers worldwide.

Product Specifications:

Neware Model	CT-9004G-5V5A
SKU#	BR0238A 110V
	BR0238B 220V
Enter the power supply	AC 220V +10% / -20%, 50Hz;
Interior input power	300W
Resolution ratio	AD：16bit；DA：16bit
Input impedence	≥1000MΩ boot state (leakage current is 100μA during shutdown)
Channel characteristics	Four-range, wide dynamic range, high-speed sampling and high precision
Voltage	Voltage range per channel	Charging: -5V ~ +5V; Discharge: 0.7V ~ 5V (9.05G channel plate), -5V ~5V (9.07G channel plate)
	Accuracy	± 0.02% of FS

	Stability	±0.005% of FS
Current	Range of current per channel	Range 1: 0.1μA—150μA
		Range 2: 150μA—5mA
		Range 3: 5mA—150mA
		Range 4: 150mA—5000 mA
	Accuracy	± 0.02% of FS
		Range 1: ± 30nA
		Range 2: ± 1μA
		Range 3: ± 30μA
		Range 4: ± 1mA
	Stability	±0.005% of FS
Power	Single-channel output power	25W
	Stability	± 0.01% of FS
Time	Current response time	≤ 100μs (10% to 90% or 90% to 10%);
	Working step time range	≥1ms
Data logging	Record condition	Time △ t: ≥1ms
		Voltage △ U: ≥ 1mV
		Current △ I: ≥ 100nA
	Record frequency	1000Hz (continuous charge and discharge mode)
Charge	Charging mode	Constant current charge / constant current constant voltage charge / constant voltage charge / constant power charge / constant power constant voltage charge / constant resistance charge
	Cut-off condition	Voltage, current, relative time, capacity, energy, and power
Discharge	Discharge mode	Constant current discharge / constant power discharge / constant resistance discharge / constant current constant voltage discharge;
	Cut-off condition	Voltage, current, relative time, and capacity
DCIR test	Support for DCIR measurement steps
Recurrence	Cycle measurement range	1 to 65,535 times
	Single cycle step number	255
	Loop nesting	With a nesting cycle function, up to 4 layers of nesting support
Protect	Software protection	Power loss data protection
		With the offline test function
		Safety protection conditions can be set, parameters can be set including: voltage limit / voltage limit / current limit / current limit / capacity limit protection / voltage fluctuation protection / current fluctuation protection;
Voltage and current detection and sampling	Four-line connection
Data base	The MySQL database was used to manage the test data
Upper-computer communication mode	Based on the TCP / IP protocol (100M Ethernet)
Data output mode	EXCEL2003, 2010, TXT
CI	Internet access
Number of main channel of equipment	4
Types of fixtures	Universal clamp (polymer clamp)
Server operating system	Windows 10
Scan code function	The software can implement, configure scanning gun scanning, test data and bar code binding (scanning gun is not included)
SMBUS characteristic
Hardware compatibility	Compatible with SMBUS, I2C communication protocol.
Software compatibility	Compatible with the standard specification field information instructions as defined by S mart Battery Data Specification Revision 1.1
Data read frequency	1s
MES data upload	Have
Number of computer-controlled channels	Multiple cabinets
Specification link	Neware CT-9004 5V5A
Software download	Click here to download

This product has been added to the cart.