Menu
Cart

BEC 50 mL - Basic Electrochemical Cell

  • $ 2,00100


This is a stationary solution basic electrochemical (electrolytic) cell for measurements of electrodes in a form of: a) rod/disc (6 mm dia.), b) thin film deposited on flat substrate (using a clip electrode) and c) membrane (using a clip electrode). The working, counter and reference electrodes are mounted in a top casing either in 2-, or 3-electrode setup. The cell elements are constructed with materials that are inert to the sample (glass and PEEK). It well fits aqueous (EPDM O-Rings) and organic solvent (FFKM O-Rings) electrolyte requirements. The construction is gas-tight and can be used when the removal and exclusion of contaminants such as oxygen and water is required by bubbling of an inert gas through the electrolyte. See the assembly demonstration here.

Application note
The reference electrode tip should be placed at the level of working electrode center. This will ensure a low potential drop throughout the electrolyte solution for low-current experiment. Various auxiliary electrodes are suitable for this cell including metal wire and metal foil electrodes as well as graphite rod. The bubbling of gas through the solution must be stopped prior to experiment.

Specification
maximum electrolyte volume: 50 mL
electrode plug diameter: 6 mm

Product includes
1 x lid – 0011CPEMA
1 x glass chamber – 0012PGLMA
1 x plug – 0005CPEMA


We Also Recommend
Pt and Au wire 0.6 mm dia., 10 mm length unit,  MSE Supplies

Pt and Au wire 0.6 mm dia., 10 mm length unit

$ 1980
Glass Fiber Membrane 25 mm dia. (pack of 10) - MSE Supplies LLC

Glass Fiber Membrane 25 mm dia. (pack of 10)

$ 5775
FTO Glass 25/25/2.2 mm – pack of 10 - MSE Supplies LLC

FTO Glass 25/25/2.2 mm – pack of 10

$ 8100
FTO Glass, pack of 10, 25 x 25 mm, 12~15 Ohm/sq,  MSE Supplies

FTO Glass, pack of 10, 25 x 25 mm, 12~15 Ohm/sq

$ 8250
ITO Glass 25/25/1.1 mm – pack of 10 - MSE Supplies LLC

ITO Glass 25/25/1.1 mm – pack of 10

$ 8250